电气系统包含长度测量系统和控制系统。
The electrical system contains length measuring system and controlling system.
设计并建立了IG541管道配件当量长度测量系统和IG541气体灭火实验系统。
IG541 fire suppression laboratory and a equivalent length of pipe fittings measuring system were established.
根据现有的手摆法纤维长度测量原理，设计了一种基于图像处理的纤维长度测量系统。
Based on the theory of manual measurement, a system to measure the fiber length based on image processing is designed.
这种长度测量系统利用四辊轧机液压微调计算机厚度控制系统的压力检测信号，作为咬钢和抛钢识别信号。
The system takes the pressure signal of hydraulic micro-adjust of the four rollers mill for signal of steel plate entering into rolling mill and signal of steel plate out of rolling mill.
本文介绍了节流式流量测量系统外接管长度对汽油机充量系数和扭矩特性的影响。
This paper introduces the effect of connecting pipe length of the flow measurement system on volumetric efficiency and torque characteristic of gasoline engines.
系统测试表明，所设计的系统可以满足钢铁企业对长度的高精度测量。
System test shows that the designed system can meet the need of high precision length measurement in iron and steel enterprises.
试验研究表明，本文提出的检测方法和系统对针尖的长度和直径测量精度均达到纺织部技术标准。
The experimental study has shown that, with the measuring method and system presented in the paper, the measuring precision of length and diameter all come up to technical standard.
一种限制仪器或系统的测量作用的机制。地震数据采集中，排列的长度就有孔径的作用。
A mechanism to limit the affects of measurements on a device or system. In seismic data acquisition, the length of the spread has the effect of an aperture.
介绍了激光干涉法长度测量的基本原理，提出在不更换和调整系统中光学器件的条件下，实现线位移和角位移—机测量集成装置的设计思想。
The paper introduces the basic principle of measuring displacement with laser interferometer, and gives a designing idea that realizes length measurement and angle measurement on one apparatus.
研究了连接动态压力传感器的信号线长度、放大器的滤波频率和数据采集系统的采样频率对空气压力波测量的影响。
The effects of the signal line length, the filter and the sampling frequencies on measuring air pressure pulse were studied in this paper.
它不仅能提供对不同系统的奇异性的一个完整描述，并能用来分析和测量非线性系统的非周期循环长度。
It not only offers different systems for a complete description of the singularity and can be used to analyze and measure the non-linear system cycle length.
研究中应用了一种柔度法疲劳裂纹自动测量系统进行裂纹长度测量。
An automatic compliance crack length measurement system for fatigue crack propagation test was used in the experiments.
基于米(长度)、克(重量)、秒(时间)和安培(电流)的一种测量单位公制系统。
A metric system of measurement units based upon the meter (length), gram (weight), second (time) and amperes (electrical current).
公制是基于以米为长度单位，克为重量单位，公升为容积单位的测量系统，它们都是十进位。
The metric system is the measuring system based on the meter for length, the gram for weight and the liter for capacity, which counts by tens.
通过对图像瞄准系统中的畸变分析，提出以激光长度测量值作为长度基准的成像系统在线自标定方法。
In this paper the distortion of image collimating system is analyzed, and then an on-line self-calibration method with double-frequency laser length measuring result as length datum is presented.
该设备采用伺服系统和带有重量变送器的称重传感器，实现了长度和重量测量，提高了测量精度和系统稳定性。
The measurement of length and the weight was realized, using the servo system and the weight sensor with weight transducer.
分析了激光干涉系统的原理，给出了长度测量的计算公式。
The principle of Laser Interferometer and its formula for length measuring are discussed in this paper.
讨论了小波变换在复合材料预制件花节长度测量中的应用技术，建立了花节长度自动测量系统。
The paper discussed application technology about composite material preform stitch measured using wavelet transform. The system is rested on the multi scale analysis of wavelet transform.
目的用口腔数字成像系统(ODIS)检验根管长度测量仪在测定前牙根管工作长度时的准确性及实用性。
Objective to test the accuracy of electronic apex locator in determining working length of anterior teeth using ODIS system.
分布式光纤温度测量系统能在整条光纤的长度上，以距离的连续函数形式传感出被测温度随光纤长度方向的变化。
The fiber optic distributed temperature sensor system can sense the change of temperature along the optical fiber by the form of continuous function of distance.
分析表明该天基导航系统的几何参数精度因子受时间测量误差均方差和基线长度变化影响较大。
The GDOP of this system relates to baseline of formation-structure and mean square deviation of time measure.
针对物理实验中对微小长度的变化的测量这一关键技术进行了分析，多视角地提出了解决这一测量技术的方法，并系统地归纳了几种该技术手段和方法。
The crucial technology to measure the variation of minimum length is analysed. The methods of the measurement are put forward in many ways and several technical methods are summed up systematically.
实验结果说明，该系统的测试结果与手工测量结果相吻合，从而还证实了小波变换用于复合材料预制件花节长度测量是可行的。
The experiments show that tested results are consisted with handiwork. This system proved that it is possible for stitch of composite material preform will be analyzed using wavelet transform.
利用单频激光干涉仪作为测量仪，通过专用变形量测量系统，测量量块在不同姿态下支撑位置对量块中心长度的影响。
Adopting laser interferometer as measuring datum, length deflection of gauge blocks are measured in different gestures by developing an adjustable platform.
利用单频激光干涉仪作为测量仪，通过专用变形量测量系统，测量量块在不同姿态下支撑位置对量块中心长度的影响。
Adopting laser interferometer as measuring datum, length deflection of gauge blocks are measured in different gestures by developing an adjustable platform.
应用推荐