目前常用的保护钢铁设备的牺牲阳极材料有铝基合金、锌基合金和镁基合金三大类。
At present, the sacrificial anode materials used for the protection of iron and steel, which are based of aluminum, zinc and magnesium alloy.
分析了镁基复合材料研究领域的现状。
The present research status of Mg base composite was analyzed.
最后，对原位颗粒增强镁基复合材料的发展趋势作了展望。
At last, the future trend of in-situ particulate reinforced Mg MMCs is presented.
本文着重研究了液态浸渗法制备纤维增强镁、铝基复合材料的浸渗工艺。
Infiltration process of fiber reinforced magnesium aluminium matrix composites made by liquid infiltration was mainly studied in the paper.
对不同条件下所得试样的组织分析表明：在加载条件下，镁基块体金属玻璃更容易发生晶化。
Based on the microstructure of samples under different conditions, Mg-based bulk metallic glass is believed to be easier to crystallize under loading.
采用化学复合法制备出水镁石基复合阻燃剂，通过正交试验法分析了制备工艺的主要影响因素，确定了最佳工艺条件。
Brucite matrix composite flame retardant was prepared by means of chemical compounding and the major influence factors of the preparation were determined by means of orthogonal experiment.
最后阐明了目前镁基大块金属玻璃的研究重点及发展趋势。
Furthermore, the study emphases and development trend of Mg-based bulk metallic glass are also introduced.
论述了采用不同增强物增强的镁基复合材料的界面微观结构，并对界面优化的方法进行了探讨。
The microstructure of interface for Mg matrix composites with different enhances were summarized, and the optimization way of interface was discussed.
有关单位对硼酸镁晶须增强铝、镁基复合材料及工程塑料进行了相关研究，取得了预期的增强效果，展示了良好的应用前景。
After study on aluminum based, magnesium based compound material reinforced by the magnesium borate whisker. It affirmed that it has the potential of anticipation result.
介绍了目前镁基大块金属玻璃的研究重点及其发展趋势。
Furthermore, the study emphases and development trend of Mg-based bulk metallic glasses are also introduced.
在传统锌基或铝基牺牲阳极的外面包覆一薄层镁基牺牲阳极制备成一种比较新颖的牺牲阳极——复合牺牲阳极。
By covering a thin layer of Mg anode onto the surface of traditional Zn anode orAl anode, a new kind of sacrificial anode-composite sacrificial anode was developed.
本文综述了碳纤维增强镁基复合材料的各种制备工艺方法，指出了它们各自的适用范围。
The preparation technology of carbon fiber reinforced magnesium matrix composites is described. After comparisons of some preparation methods, their applicable domains are pointed out respectively.
该文综述并预测了镁基合金在储氢材料上的应用前景。
The article summarizes and predicts the prospects of magnesium and its alloys used as hydrogen storage materials.
论文分析了镁基合金二元和多元相图的研究现状；指出了镁合金在合金化中存在的问题。
The research status of binary and multi-component phase diagram of magnesium alloys has been analyzed and several problems existing in alloying of magnesium alloys have been pointed out.
结果表明，热自组装膜改善了镁基生物材料的腐蚀抗力和生物活性。
The results showed that the corrosion resistance and bioactivity of the bio-magnesium materials with heat-self-assembled monolayer were improved.
文章简要阐述了湿化学法制备锶镁掺杂的镓酸镧基固体电解质粉末的工艺流程、制备粉体性能及优缺点；
The procedures, advantages and disadvantages of different synthesis methods are analyzed, and the properties of powders synthesized by different methods also discussed.
本论文的工作集中于储氢合金的研究，重点是关于镁基合金的制备和研究。
This dissertation is focused on the research of the hydrogen storage alloy, and the emphasis of my work is mainly about the preparation and research of magnesium based alloy.
镁基储氢材料储氢容量大，并且吸放氢过程伴随一定的热效应，从而在氢气的存储和热能存储等方面具有潜在的应用前景。
Mg-based hydrogen storage material is very promising for hydrogen storage and heat storage application because of its thermal capacity and heat effect.
最近有学者指出地氟病的发病机制主要有以下三方面学说：1低营养低钙学说，2自由基学说，3镁学说。
Three theories were put forward by some researcher. 1 low nutrition and low calcium 2 free radical 3 magnesium theory.
镁基复合材料的强化主要来自增强体的强化作用、细晶强化和析出强化。
The composite was strengthening by the reinforced phase, refining the grain and deposition.
综述了镁基复合材料的研究概况，着重介绍了镁基复合材料的制备方法、性能和界面行为。最后，对镁基复合材料的研究方向提出了一些看法和展望。
The studies on Mg based composites, especially on their fabrication methods. Properties and interface behaviors are reviewed. At last, the research trends of them are presented.
镁基复合材料的阻尼性能与其状态关系密切，退火处理和热循环处理提高了复合材料的阻尼性能。
And it was also found the annealing treatment and the heat recycling treatment could improve the damping capacity of magnesium matrix composite.
亚硫酸氢盐里的钙离子，镁离子，钠离子，铵根离子等化学基可以电离。
The chemical base for the bisulfite can be ionic calcium, magnesium, sodium or ammonium, Sulfite pulping can be carried out over a wide range of PH.
我们认为这是由于烷基异氰酸酯从阴极得到电子发生比分子偶联，芳基异氰酸酯则是与阴极析出的高分散的活性镁起作用。
This is because of the coupling reaction between two alkyl compounds occurred by gaining electron from cathode, and aryl isocyanate reacted with high dispersed active magnesium on the cathode.
研究中采用在石膏中添加菱镁凝胶材料，探讨通过与该类材料复合的方式来增强石膏基复合材料强度的可行性。
In the study the means of adding magnesium gel to gypsum is carried out to enhance the strength of gypsum based composites and its feasibility is studied.
总结了目前制备镁基储氢材料所用的主要方法，例如熔炼法、扩散法、机械合金化法、氢化燃烧合成法等。
Also sum up the manufacturing methods of magnesium based hydrogen storage materials, containing melting method, diffusing method, mechanical alloy method, composing by hydrogen burning metho...
本发明的镁基块体非晶合金具有高非晶形成能力，镁含量高，强度高，耐腐蚀性能好等优点。
The Mg-based block amorphous alloy has the advantages of high amorphous formation ability, high Mg content, high strength, good corrosion resistance, and the like.
该菌使用的培养基主要成分有玉米粉，黄豆粉，硫酸铵，硫酸镁和硫酸锰等无机盐。
The composition of the substratum for the bacteria is maize powder, soybean powder, ammonium sulphate, magnesium sulphate and manganese sulphate etc. inorganic salt.
该系列镁基块体非晶合金的优异性能使其在新型轻质结构材料等领域具有广阔的应用前景。
The serial Mg-based block amorphous alloy has wide application prospect in the fields of novel light structure materials, and the like by excellent performance.
该系列镁基块体非晶合金的优异性能使其在新型轻质结构材料等领域具有广阔的应用前景。
The serial Mg-based block amorphous alloy has wide application prospect in the fields of novel light structure materials, and the like by excellent performance.
应用推荐