对化学镀镍加工的凝汽器黄铜管进行了性能检测，镀镍管镀层各项性能指标均达到了相关的技术标准。
The plating performance of electroless nickel-plated condenser brass tubes was tested and all the performance indicators were in accordance with the related technology standards.
采用直流电沉积法制备了纳米晶体镍，用TEM和X -射线衍射等方法研究镀镍层的微观结构。
Nanocrystalline nickel was synthesized by direct current electrodeposition. The microstructure of nanocrystalline nickel was studied by TEM and X-ray diffraction.
指针的表面电镀需经过下列几道工序：过滤、去油脂、预镀镍、镀镍，之间还穿插了数次清洗。
The finish of the hand is achieved by electroplating involving several stages: leaching, degreasing, pre-nickelplating and nickelplating, along with numerous rinses.
介绍了一种光亮镀镍液中硼酸和氯化镍的测定方法。
A method for continuous titration of boric acid and nickel chloride in bright nickel plating bath was presented.
向镀液中加入氟化物，采用硫酸镍代替碳酸镍作为镍源，开发出一种镁合金化学镀镍新工艺。
A new technology of electroless nickel plating for magnesium alloys was developed by addition of fluoride in bath and using nickel sulfate as nickel resource.
对摩托车零件电镀采用预镀镍-半光亮镍-光亮镍-镍封-装饰铬的组合镀层工艺，能完全符合质量标准要求。
A coating combination of nickel strike, semi-bright and bright nickel, nickel sealing plus decorative chromium is suggested to provide motorcycle parts with the standard quality finish.
介绍了镍钨镀层、镍钨硼（磷）镀层、含钨复合镀层和含钨电刷镀镀层等的研究与开发的近期进展。
The paper present the new developments of Ni-W coat, Ni-W-B coat, tungsten composite coat and tungsten brush coat etc.
介绍一种在工程塑料表面上进行化学镀镍的工艺方法，探讨了化学镀镍的工艺条件，有实用价值。
One technique for the chemical nickel plating on the plastics surface was introduced. The process conditions of chemical plating were discussed.
尤其在中、高端散热器电镀方面，在酸性镀铜、镀镍、黑镍等有着丰富的生产实践经验，在电镀行业领域具有领先地位。
Especially in, high-end radiator electroplating, in acidic copper, nickel, black nickel, and so has the rich production experience, in electroplating industry area is the leading status.
探讨了在聚氨酯泡沫塑料上用化学镀镍法制备泡沫镍的工艺和性能。
The process of preparation and performance of nickel foam by electroless plating nickel on the polyurethane foam was investigated.
化学镀镍单板和化学镀镍刨花的组织结构摘要对性能的影响是木材组织和金属镀层共同作用的结果。
The influence that structure of nickel-plated veneers and particles has on its properties is the result of timber micro structure and metal layer common role.
尤其在中、高端散热器电镀方面，在酸性镀铜、镀镍、黑镍等有着丰富的生产实践经验，在电镀行业领域具有领先地位。
Especially in, high-end radiator electroplating, in acid, nickel plated copper plating nickel etc, black has a wealth of experience in production practice, plating industry area is the lead.
为了获得电镀的最佳结果，在生产中对珍珠镍、光亮镍、酸性铜和黄铜四种镀液的成分参数进行了统计分析。
The component data of pearl nickel, bright nickel, acidic copper and brass plating solution in production were analyzed when the best result of the plating deposit obtained.
采用硫酸镍、钨酸钠和柠檬酸三钠为基本组分的镀液，通过电镀的方法在紫铜试片上沉积得到了镍钨合金镀层。
Nickeltungsten alloy coating was deposited on copper plate making use of electroplating in the bath composed of nickel sulfate, sodium tungstate, and trisodium citrate.
用化学镀法制备了镍包铜粉，并利用固相烧结法将镍包铜粉成功地制成了块状烧结体。
Nickel plat copper powders were prepared by electrolytic plating and bulk sinters of nickel-coated copper powders were prepared by sintering.
研究了在镍钴合金镀液中加入碳化钨微粒形成镍-钴-碳化钨复合镀层的共沉积过程。
Composite electrodeposits of nickel-cobalt-tungsten carbide were prepared by adding tungsten carbide particles in the nickel-cobalt alloy solution.
本文总结了影响化学镀镍金可焊性的复杂因素如：前处理的影响、化学镀镍过程的影响、浸金的影响、浸金后水洗的影响、焊料的影响。
This paper servers as a summary review of the complex factors such as the prepare, the process of electroless nickel, immersion gold, the rinse after immersion gold, the solder.
广义的化学镀镍工艺包括镀前预处理工艺、镀镍工艺和后处理工艺。
Generalized electroless nickel plating technology involves pretreatment technology, nickel plating technology and after treatment.
应用化学镀层法对改性后的CNT镀镍、铜及镍铜混合镀层技术进行了一系列研究。
The plating (layers) such as Ni, Cu and Ni-Cu formed on the CNTs surface by chemical plating process were investigated.
采用酸性钼酸盐酸洗、碱性钼酸盐活化工艺，研究了AM60镁合金上硫酸镍溶液体系化学镀镍的方法。
The process for electroless nickel plating of AM60 magnesium alloy in a nickel sulfate bath, based on etching in acidic molybdate and activation in alkali molybdate, was studied.
采用预镀镍的方法，研究了含硅低碳钢预镀镍后与液态锌的反应以及金属间化合物组织的形成和变化规律。
The formation and growth kinetics of the intermetallic compounds through reaction between liquid Zn and low carbon steel containing Si which is treated by electroless pre-plating ni are analyzed.
研究了一种新型的镍磷合金镀层镀后处理工艺，即在常温下。采用化学的方法对镍磷合金镀层进行封孔处理。
A new post-treatment technique that Ni-P alloy coatings can be sealed at ambient temperature by chemical method has been investigated and developed.
采用合适的电解镍液或化学镀镍液的配方来制取低应力镍层；
Suitable com- pound Ni electroplating or electroless Ni plating solution were chosen to make low stress Ni layer.
在瓦特镍镀液中加入添加剂后获得较稳定的悬浊液，利用这种镀液制得珠光效果良好的珍珠镍镀层。
A very stable emulsion was obtained with addition of one additive in Watts nickel electroplating bath. Using the emulsion an even satin-finished nickel coating was prepared.
镀镍层SEM照片显示，镀镍层晶粒尺寸大小均匀，各晶粒间结合紧密，孔隙率低，耐腐蚀能力强。
The SEM photo shows that the nickel deposit has even crystal size, good adhesion, low porosity and strong corrosion resistance.
从镍磷化学镀的反应机理出发，讨论了反应中影响磷沉积速率和镀层中磷含量的主要因素，试验制备了含磷量较高且抗蚀性良好的镍磷镀层。
The chemical Ni P plating mechanism in acid baths and the major aspects which influence the plating rate and P content of Ni P alloy coatings were discussed.
研制了一种适用于对陶瓷颗粒进行化学镀镍的碱性化学镀镍配方及工艺，并设计出适用于对颗粒材料进行化学镀的试验设备。
An alkaline solution suitable for electroless nickel plating on porcelain granule was developed, and an equipment suitable for processing granule material was also designed.
本文阐述了低温化学镀镍的特点，总结了国内外在化学镀镍低温化方面的研究成果。
Main features of low temperature electroless nickel plating were described, and studies of low temperature electroless nickel plating home and abroad were summarized.
本文阐述了低温化学镀镍的特点，总结了国内外在化学镀镍低温化方面的研究成果。
Main features of low temperature electroless nickel plating were described, and studies of low temperature electroless nickel plating home and abroad were summarized.
应用推荐