实现线材在热镀锌过程中作业的连续化、控制的智能化意义重大。
For wire products, it is very interesting to realize continuous operations and intelligent control in the hot - dip galvanizing process.
研究了镀锌过程中镀锌工艺条件对电镀效果及镀锌石墨粉含锌量的影响。
The influences of electroplating parameters on the zinc content of zinc-plated graphite powders were analyzed in detail.
通过在机械镀锌过程中添加不同量的稀土金属盐，在钢铁试样表面形成不同成分含量的锌基稀土合金镀层。
Zinc based RE alloy coating was obtained on the surface of steel samples by adding RE metal salts during the mechanical plating process.
介绍了热浸镀锌清洁生产工艺流程，分析了热浸镀锌过程中的能耗，给出了相关的改进措施，减少污染的同时节约了生产成本。
The process flow of cleaner production for hot dip galvanizing was introduced and the energy consumption was analyzed. Some improvements in decreasing pollution and saving production costs were given.
根据阴极沉积物生成机理及甲壳胺分子结构，探讨了甲壳胺分子对铵盐镀锌过程的影响。结果表明甲壳胺可以作为铵盐镀锌的一种有效的光亮剂。
Based on formation mechanism of cathodic deposits and molecular structure of carapace amine, effects of carapace amine molecules on process of ammonium Zn plating are studied.
镀锌钢材可以和其它钢铁生产过程中的废料一起回收——其中锌通过挥发进行回收。
Zinc coated steel is recycled along with other steel scrap during the steel production process - the zinc volatilises and is then recovered.
强度，每个笼子1M左右的间隔相等，使间隔物，并在每一块镀锌丝网石笼编织过程中，而纬纱的直径。
Strength, equal intervals each cage is about 1M, the spacer, and in each block of stone cage galvanized wire mesh weaving process, and weft diameter.
还得需求最后的查验过程，彩钢板镀锌层厚度查验可采用涂层测厚仪，办法对比简洁。
Also need the final inspection process, color galvanized steel layer thickness can be used to determine the thickness of the coating device, the method is simple.
试验过程中，通过改变钎焊工艺参数及激光入射方式，研究了镀锌钢板激光填丝钎焊在不同热输入下的钎缝外观成形规律。
In experiments, brazing parameters and laser incident Angle were changed during the process. The regularity of appearance of brazing seam in different heat input was obtained.
今天小编给大家说一说镀锌工艺过程中容易发生的四大问题。
Today Xiaobian to say that the process of zinc plating prone to four major problems.
镀锌钢管生产工艺中，为保证产品质量，防止运输过程中产品生锈，需对钢管进行表面喷漆保护处理。
The pipe shall be protected with surface paint to prevent pipe rust during transportation for ensuring the quality of pipe during galvanized pipe production process.
采用电化学方法研究了镀锌金具的腐蚀过程。
The involved corrosion process was studied through electrochemical measurements.
而所谓电镀锌就是利用电解，在制件表面形成均匀、致密、结合良好的金属或合金沉积层的过程。
And the so-called electro galvanizing is the use of electrolysis, the formation of uniform, dense, combined with the process of metal or alloy deposit on the surface of workpiece is good.
介绍了热镀锌合金钢板的性能、生产过程和应用情况。
The property, production process and application of hot galvanizing alloy plates are introduced.
本文介绍了将氰化钠镀锌溶液转换为氯化钾镀锌溶液的镀锌工艺过程，从工艺、健康、环保、成本等方面进行阐述。
The paper introduced the technics process conversion of sodium cyanide galvanization solution to potassium chloride solution. It expounded in technics, health, entironment, cost, etc.
介绍邯钢冷轧热镀锌线在生产中所遇到的一些表面缺陷，及对解决过程中所遇到的一些问题进行探讨。
Surface defect in cold rolled galvanization plate in Handan Iron and Steel Limited Group has been introduced, meanwhile the solution process has been discussed.
唐钢热轧热镀锌生产线调试初期的产品在加工使用过程中，出现了脱锌的现象。
Zinc scaling was occurred in the early products of hot rolled galvanization line in TanShan Iron and Steel Limited Cooperation.
在连续热镀锌生产过程中，在熔融锌槽中，沉没辊的耐蚀性和化学稳定性是影响产品质量和生产率的重要因素。
In continuous hot-dip galvanization process the corrosion and chemical stability of the sink roll in the galvanizing bath are important problem which effects on the quality and productivity.
论述了现代碱性光亮镀锌添加剂单体结构的新进展及对锌电沉积过程的作用机理。
New development of brighteners for alkaline zinc plating is reviewed with stresses on the advances in structure of monomers.
分析了在常规热镀锌浴中加镍后，镍在镀层形成过程中的作用，以及对镀层工艺、性能的影响。
This paper deals with the role of Ni in coating forming and the effect of Ni on process and property when adding Ni to hot dip Zn bath.
阐述了机械镀锌层的表面质量、结合力及其耐蚀性，提出了机械镀锌的沉积过程模型。通过实验数据及分析加以验证。
Surface quality adhesion to substrate and corrosion resistance of zinc coating of mechanical plating are described. The deposition model is proposed and is confirmed by experimental results.
并介绍了机械镀锌这一新的利于环境控制的镀锌工艺的原理和工艺过程。
We also introduced the principle and process of mechanical plating which is beneficial to environmental controlling.
本文介绍氯化钾镀锌工艺过程、主要工序的配方及工艺条件、镀液主要成分的分析方法。
The potassium chloride zincification technics was introduced, and its proportioning and condition for primary working procedure, and check and measure for primary ingredient.
机械镀锌工艺中起关键作用的是锌粉团在工件上的吸附、强化和稳定这一过程可以提高沉积速度。
Adsorption of zinc powders on surface of work pieces playes an important part in the process of mechanical plating, the strengthening and stabilizing adsorptions can increase the speed of deposition.
介绍了高强度螺栓机械镀锌的表面处理工艺，应对生产过程中常遇到问题提出了解决的方法。
The surface treatment technology is introduced for the high strength, bolt mechanical zinc coating. Specific instructions are provided for general trouble-shooting in the operation.
对镀锌板激光拼焊过程中焊缝上出现孔洞时的等离子体光信号进行了幅域和频域分析。
Light emission from the plasma in laser welding of zinc-coated plates when there appeared pinhole in the weld were analysised on magnitude and frequency ranges.
铁丝连续镀锌的生产过程由拉丝、热处理、前处理、镀锌、后处理和废水处理所组成。
The production process of continuous zinc electroplating for steel wire was composed of wire drawing, heat treatment, pretreatment, zinc plating aid post-treatment as well as wastewater treatment.
介绍了不锈钢基材电镀镍钼合金的全部工艺过程，并讨论了前处理、锌酸盐镀锌作底层和钼合金电镀等过程因素对本工艺实施的影响。
The process of Ni-Mo plating of stainless steel is introduced in detail. The effects of pretreatment, Zincate Zn pre-plating and process factors on-the technology are also discussed.
镀锌钢因其良好的抗腐蚀性能而广泛应用于各个领域，而镀锌层的存在使得镀锌钢的焊接过程和焊接质量受到不利影响。
Galvanized steel is widely used in industry due to its excellent corrosion resistance. However, the zinc coating greatly reduces the welding process property of galvanized steel.
激光深熔焊接镀锌钢的过程中存在着锌蒸气和锌等离子体两种特有焊接特征。
There are two unique characteristics, zinc vaporization and zinc plasma, existing in deep penetration laser welding of galvanized steel.
应用推荐