锻造合金具有良好的可锻性，在压力下会变形。
Wrought alloys possess good forgeability, it gives way to pressure.
锻造合金：较易延展的金属合金，在制造过程中可以进行热加工或冷加工。
Wrought alloy. A metal alloy that is relatively ductile and amenable to hot working or cold working during fabrication.
和含碳量较高的合金不同，含碳量低的合金稍软一些，在锻造过程中，两种合金熔合在一起，就会形成极其漂亮的花纹。
Metal with low carbon level is soft unlike metal that contains much carbon. In forging the two kinds of metal are mixed forming the most beautiful pattern.
某发动机用GH4169合金涡轮轴转动锻件由轴部和盘部两部分组成，考虑采用两步锻造法进行生产。
A two-step forging approach was taken in the production of GH4169 turboshaft of an engine, which was an integration of a disk and a shaft.
研究了不同等温锻造温度对2b70铝合金显微组织与力学性能的影响。
The effect of isothermal forging temperature on microstructure and mechanical properties of2B70 aluminum alloy was studied.
锻造处理对合金硬度和导电率的影响不明显。
The effect of forging on hardness and conductivity of alloy is unconspicuous.
热形变加工：金属及其合金的热压、锻造、轧制等形变加工。
Thermal deformation processing: heat pressing, forging and rolling for metal and alloy.
研究这些合金的超塑性能，对采用超塑性等温锻造方法制造复杂形状锻件具有重要意义。
It is of great significance to research on the superplastic properties of these alloys for using superplastic isothermal forging to manufacture complex forge pieces.
上述研究为TA15合金连接件的等温锻造工艺的优化设计及质量控制提供了理论和技术上的支持。
This work provides the theory and technique foundation for implementing process optimized design and quality control scheme of TA15 alloy connecting piece isothermal forging process.
研究这些合金的晶粒细化和超塑性能，对采用超塑性等温锻造方法制造复杂形状航空锻件具有重要意义。
Therefore, it is of great significance to research the superplastic properties of these alloys for using superplastic isothermal forging to manufacture complex aviatic forge pieces.
利用锻造方法并结合锻后适当的热处理工艺可大幅度提高铬合金白口铸铁的冲击韧性。
Adopting forging method and proper heat treatment after forging can improve significantly the impact toughness of chromium alloy white cast iron.
一种硬而软的元素可锻造抗腐蚀用于合金中见于硫镍铁矿砷钴矿硅镁镍矿针镍矿中。
A hard malleable ductile silvery element that is resistant to corrosion used in alloys occurs in pentlandite and smaltite and garnierite and millerite.
研究了不同热处理工艺参数对LD 10合金锻造后力学性能的影响。
The effect of different heat treatment process parameters on mechanical properties of LD10 alloy after forging was investigated.
研究了高强度钨合金材料大变形量锻造后的扫描断口，并结合力学性能变化规律分析了大变形对材料组织和性能的影响。
In this paper, after large deformation, scanning fractograph of tungsten alloys have been studied, and the influence of large deformation level on microstructure and properties has been analysed.
对不同锻造变形量的钨合金材料组织、性能及其再结晶行为进行了研究。
The investigation was made on microstructure, mechanical property and recrystallization behavior of tungsten alloy with different amount of swaged deformation.
本文讨论了在锻造过程中不同变形温度、变形程度、变形速度对高温合金组织和性能的影响。
In this paper, the influence of various deformation temperature, deformation degree and deformation velocity on structure and properties of superalloys in forging process was discussed.
如何采用高效、经济的方法生产出优质、低成本的锻造铝合金轮毂，已成为生产中急需解决的问题。
It is urgent need to solve the problem of how to produce aluminium alloy wheel efficiently and economically.
研究了6063锻造铝合金单轴拉压载荷下的疲劳特性。
The fatigue characteristic of forged 6063 al alloy under uniaxial loading was studied.
研究了不同等温锻造温度对2b70铝合金显微组织与力学性能的影响。
The effect of isothermal forging temperature on microstructure and mechanical properties of 2b70 aluminum alloy was studied.
本文论述了GH49合金锻造叶片局部粗晶形成的主要原因是临界变形。
The origin of localized coarse grains in forged GH49 alloy blades and some approaches of their prevention are studied in this paper.
从锻件的材质、锻造工艺参数、锻模温度、热处理工艺参数四个方面，阐述了铝合金模锻件粗晶缺陷的产生原因及消除措施。
The article discusses causes and eliminated measures of aluminium alloy die forgings crassitude crystal from four sides of component, technical parameter, temper of die and heat treatment.
本文的研究结果为实现粉末高温合金盘件超塑性等温锻造奠定了基础。
The work in this paper can provide useful information for isothermal forging process of P/M superalloy turbine disk.
径向锻造可获得全截面细晶材料，并实现高合金难变形材料由锭到材的一火次锻造。
The gross section fine grain material can be obtained by radial forging. One heat forging from ingot to finished products of high alloy with hard deformation can be realized.
研究了两类锻造工艺对航天用TC 4钛合金异形锻件的显微组织及拉伸性能的影响。
The influence of two abnormal forging processes on the microstructures and tensile properties of TC4 alloy is investigated.
本文对2618A铝合金进行了大量的试验，并对试验结果进行了较详细地分析和研究，为2618A铝合金锻件研制过程中锻造工艺参数的确定提供了依据。
The experiment results on 2618 A A1 alloy are analyzed and the bases for determining the technical parameters of 2618A Al alloy forging parts are provided.
通过对超硬铝合金7175T74的试验研究，给出了7175T74合金的锻造工艺参数。 依此工艺生产的锻件其性能达到美国宇航材料规范AMS4149A规定的技术指标。
By experimental research on the superhard aluminum alloy 7175T74, the parameters of forging process of 7175T74 are given, which achieve the mechanical property of the of U. S. 'AMS4149A.
通过对超硬铝合金7175T74的试验研究，给出了7175T74合金的锻造工艺参数。 依此工艺生产的锻件其性能达到美国宇航材料规范AMS4149A规定的技术指标。
By experimental research on the superhard aluminum alloy 7175T74, the parameters of forging process of 7175T74 are given, which achieve the mechanical property of the of U. S. 'AMS4149A.
应用推荐