介绍了生产高硅锰硅合金的几种方法。
It introduces a few methods of silicomanganese with high-silicon in production practice.
介绍了用高碳铬铁渣做造渣剂冶炼锰硅合金的生产实践。
The practice of smelting ferromanganese silicon with slag of high carbon ferrochrome is introduced.
阐述了在9MVA封闭电炉上冶炼高硅锰硅合金的实践。
The practice of smelting high silicon ferromanganese silicon in 9MVA closed electric furnace is expounded.
本文介绍了采用空心电极喷矿粉工艺生产锰硅合金的试验情况。
The paper introduces tests to produce MnSi by dusting ore powder through hollow electrode.
介绍了锰硅合金生产中进行煤气干式净化存在的问题及解决途径。
It introduces the problems existing in gas dry cleaning from MnSi production as well as its measures.
随着近年来冶金焦大幅涨价，采购也较困难，严重制约锰硅合金的生产。
In recent years, metallurgy coke restricts the production of manganese silicon alloys severely because of its significantly raising price and the difficulty of its purchase.
介绍了电炉生产锰硅合金时，合金中硫含量随所用原料硫含量变化的情况。
The paper introduces the state of sulphur content changing in accordance with raw material's when production furnace ferromanganese-silicon.
提出用稀土铬锰硅合金代替昂贵的稀土钼铁合金生产高性能的柴油机缸体。
It is proposed rare earth chrome-manganese-silicon alloy can replace the costly rare earth ferro-molybdenum alloy to produce diesel engine cylinder with high property.
介绍了电炉生产锰硅合金时，合金中硫含量随所用原料硫含量变化的情况。
In producing Mn Si alloys with hot furnace, feeding ratio of s? Mn is regulated, and slag amount and pH value are controled.
在锰硅合金生产中，用菱镁石取代中碳锰铁渣，以调整渣型，保证生产运行。
Replacing MC ferromanganese slag with magnesite in manganese-silicon production, adjusting slag type to assure regular production.
论述在摇炉加矿预炼过程中，适量附加固态锰硅合金和铁渣进行预炼生产的可行性。
The feasibility is discussed on premelting MC FeMn adding the right amount solid MnSi alloy and slag in a shaker hearth furnace.
对锰硅合金冷凝及破碎为规格粒度过程中产生粉末的原因进行了分析，提出了防止和降低破粉率的措施和方法。
The causes of producing fine during ferromanganese-silicon cooling and crushing is analyzed. The measures and methods are put forward to prevent and reduce degradation index during crushing.
介绍了纯净高硅锰硅合金的生产工艺，即要有优质的原料、较高的炉温、合适的炉渣碱度和正确的冶炼操作方法。
It introduces the technology of producing clean high-silicon silicomanganese. Fine materials, higher furnace temperature, suitable slag basicity and correct operation are all needed in the technology.
合金钢的性质取决于其所含有的除碳以外的一种或多种元素，如镍、铬、锰、钼、钨、硅、钒和铜。
Alloy steel owe their properties to the presence of one or more elements other than carbon, namely nickel, chromium, manganese, molybdenum, tungsten, silicon, vanadium, and copper.
硅锰、硅铁、铬锰、锰铁等铁合金产品。
Guimeng, electric, chromium manganese, ferro-alloys such as ferromanganese products.
本公司生产的硅锰合金已经通过体系认证。
The company's Silicon-manganese alloys have been certified through the system.
硅锰铬合金、炉料矿石、富锰渣的生产销售。
Guimeng chromium alloy, furnace charge ores, manganese residue rich production sales.
如由铅、锡、锰、镍、铁、硅组成的铜合金。
If by lead and tin, manganese, nickel and iron, silicon composed of copper alloys.
用硝酸和氢氟酸溶解试样，采用耐氢氟酸雾化装置，用ICP - AES法测定硅锰合金中的硅。
Dissolving sample with nitric acid and hydrofluoric acid, the silicon content of silicon-manganese alloy was made a measurement with ICP-AES method in the hydrofluoric acid-resistant spray devices.
介绍了应用DV - 4光电光谱仪，仅用一种测定条件，测定高合金钢中碳、硫、磷、锰、硅、铬、镍、钼、钒、钨、钛、铌、铝元素的含量的方法。
The method of measuring c, s, p, Mn, Si, Cr, Ni, Mo, V, W, ti, Nb, Al element content by DV-4 photoelectric spectroscope on one condition is introduced.
采用正交组合回归设计实验方法，研究硅、锰元素对铸态锌基合金力学性能的影响规律。
By the orthogonal regressive principle, the experiment method is designed, and the regularity that the affect elements si and Mn in the mechanical properties of cast zinc-base alloy have been studied.
但添加硅锰母合金对冲击韧性有不利影响。
But the addition of SM master alloy has some deleterious effect on the toughness of sintered steel.
通过添加硅锰母合金，将硅、锰这两种对氧亲和力较高的元素加入到烧结钢中，以改善烧结钢的力学性能。
The SM master alloy was used to add high oxygen affinity elements Mn and si into the sintered steel as alloying elements to improve the mechanical properties.
硅锰合金、电炉高碳、锰铁、低度锰铁冶炼销售。
Guimeng alloys, an electric high-carbon, ferromanganese, low ferromanganese smelting sales.
观察了含硅锰母合金烧结钢的组织变化和合金元素锰、硅的分布情况。
The structural changes of silicon manganese containing master alloy and the distribution conditions of manganese and silicon components have been observed.
钛合金可以与铝、铁、钒、硅、钴、钽、锆、锰元素混合。
Titanium alloys can blended with aluminium, iron, vanadium, silicon, cobalt, tantalum, zirconium, and manganese.
本发明的模压淬火6020合金含有硅、镁、铜、铁、锰、铬和锡。
The press quench 6020 alloy of the present invention contains silicon, magnesium, copper, iron, manganese, chromium, and tin.
提出了铬锰硅系低合金钢的最佳成份范围。
The paper points out the optimum chemical composition of chromium-manganese series low alloy cast steel.
对碳电热还原法生产的共晶铝硅合金加锰自然沉降法除铁进行了研究。
The removing iron process by natural deposition of eutectic Al-Si alloys produced by carbothermal reduction was studied.
介绍了用氟硅酸钾滴定法测定硅锰合金中硅的方法，选择确定了最佳实验条件以及干扰的消除。
The method of determination of silicon in Mn - si alloy with potassium fluosilicate titration is introduced. On the best test condition, disturbance element is removed.
应用推荐