法向圆弧螺旋锥齿轮传动是一种新的锥齿轮传动形式。
The normal arc spiral bevel gears is a new type of transmission pair.
在充分考虑影响螺旋锥齿轮传动的各模糊因素的基础上，进行了实例计算。
Considering all fuzzy factors which may effect on spiral bevel gear transmission, the writer calculates an example.
研究了在外载荷作用下锥齿轮传动转子系统纵弯扭耦合振动的不平衡响应。
The unbalanced responses of bevel geared rotor system under external torque in the coupled axial-lateral-torsional directions were studied.
利用最小有向距离原理，提出了斜航式法向圆弧锥齿轮传动的误差分析仿真算法。
Based on the principle of "minimal orientation-distance", an emulation algorithm of error analysis is put forward for transmission of loxodrome normal circular-arc bevel gear.
螺旋锥齿轮啮合时产生的附加动载荷是螺旋锥齿轮传动产生振动、噪声的主要原因。
Additional dynamic load during Spiral bevel gear meshing is main cause of vibration and noise. Based on national standard.
本论文的程序已经集成进弧齿锥齿轮传动设计制造与分析系统，经过初步使用取得了较好的效果。
The program in the dissertation had integrated in the spiral bevel gear transmission design, manufacture and analysis system, and proved to reach the design purpose in its application.
本文将圆柱圆锥齿轮传动推广到内圆柱圆锥齿轮传动中，并应用于锥差式减速器中作周向限制副。
This thesis extended the external cylinder bevel gear transmission into the case of internal cylinder bevel gear transmission, and apprited it into the offset planetary drive of bevel gears.
本文根据模糊数学原理，建立了直齿园锥齿轮传动的模糊优化设计模型并对实例进行了模糊优化设计。
A fuzzy optimal model for straight bevel gear drive is established according to the principle of fuzzy mathematics in the paper. A fuzzy optimal design for an actual case is made by authors.
介绍了螺旋锥齿轮传动的模糊优化方法，对实例进行了模糊优化设计，验证了本文提出的数学模型和方法。
The fuzzy optimization method for helical bevel gear drive is described. A fuzzy optimal design of an actual example is carried out and the math model presented in this article is demonstrated.
单个标准模块主要由中间通孔式连接手臂、履带驱动链传动装置、模块偏转锥齿轮传动装置、模块俯仰链传动装置、连接柄等组成。
A standard such module is mainly composed of the link arm, the link handle, the track driven system, the offset pitch joint, the offset yaw joint and so on.
进入变速箱，万向节连接中心传动轴到内部锥齿轮。
Going into the gearbox, universal joints connect the centre drive shaft to the internal bevel gears.
根据弧齿锥齿轮的非零变位原理，采用正传动可大幅度提高弧齿锥齿轮的强度和综合性能。
Based on the theory of nonzero-coefficient spiral bevel gear, positive transmission can improve the gear's intensity and integrate capability.
本文首先提出了直流电机驱动、锥齿轮换向及谐波传动减速的系统整体设计方案。
Firstly, a whole design project, that a direct current motor and a harmonic drive reducer are used to drive the actuator is determined.
采用该方法对弧齿锥齿轮进行装配和调试，降低了噪声，减小了震动，保证了传动精度。
Using this method in spiral bevel gears' setting, the noise could be reduced, the vibration be decreased and the precision of transmission be ensured.
螺旋锥齿轮由于其传动平稳、强度高而被广泛应用于车辆、机床、直升飞机、矿山工程等机械的角度传动中。
Spiral-bevel and hypoid gears with driving smoothly and high strength are widely used in driving between crossed axes, such as vehicles, machine tools, helicopter and mining machinery.
主传动为螺旋锥齿轮，承载能力大，效率高。
Main transmission is spiral bevel gear, Strong in load bearing, high in efficiency.
螺旋锥齿轮是机械传动的基础元件，其空间形状和加工过程相当复杂。
Spiral bevel gear is the mechanical transmission fundamental element. Its space shape and the machining process are very complicated.
本文主要对这种新型传动齿轮——斜航式法向圆弧螺旋锥齿轮的误差与变异的关系和精度检测进行了较为深入的理论研究。
In this dissertation, the relationship between the errors and variations for the loxodrome normal circular-arc spiral bevel gear (LNCSBG) is deeply studied.
双圆弧弧齿锥齿轮是将点啮合制圆弧齿轮传动形式运用到锥齿轮上的成功例子。
Its basic gear tooth profile is double circular arc spiral bevel gear tooth profile.
弧齿锥齿轮和准双曲面齿轮(以下简称锥齿轮)广泛用于车辆传动中，锥齿轮的传动噪声以及平稳性是影响整车性能的重要因素。
Spiral bevel and hypoid gears have been widely used in the transmission system of automobile as one of the key parts.
现在的主减速器普遍使用准双曲面圆锥齿轮，这主要是因为 主动锥齿轮的偏移允许轿车上传动轴布置得比从动锥齿轮低 一些，而商用车上又允许布置得比从动锥齿轮高一些。
The hypoid gear is in common use today due mainly to the fact that the offset pinion allows the propeller shaft to be set below, (for cars) or above, (for commercial vehicles) the crown wheel center.
弧齿锥齿轮广泛用于肮空传动，作为直升机的关键零件，其啮合质量的控制是一个既重要又困难的课题。
Spiral bevel gears are widely used in aviation transmission. As key components of helicopter, controlling their meshing quality is an important and difficult problem.
在转子系统模拟试验台上，对发动机主传动锥齿轮接触性能进行了实验研究。
A contrast experiment for the spiral bevel gears was carried out on a rotor test facility with elastic supports.
机动时，两个锥齿轮脱离啮合状态，蜗轮、蜗杆啮合传动；
When operated by a machine, the two bevel gears disengage from the engaging state, and the worm gear and the worm are engaged for driving;
螺旋锥齿轮是现代传动系统中的重要部件。
Spiral bevel gear is important transmission fundamental component applied in modern gearing.
螺旋锥齿轮是现代传动系统中的重要部件。
Spiral bevel gear is important transmission fundamental component applied in modern gearing.
应用推荐