采用悬浮浇铸工艺并控制冷却速度成功地得到了钢颗粒增强纯铜基铸造复合材料。
Steel grain-reinforced pure copper cast composite was gotten successfully by suspension casting process and controlling the cooling rate.
铸造烧结法是一种制备铁基表面复合材料的新工艺方法。
Casting sintering is a new technique by which iron-based surface composites are produced.
在离心铸造粒子增强金属基复合材料中，增强体颗粒会发生偏析。
The particle segregation occurs in SiC particles reinforced Al matrix composites by centrifugal casting.
采用挤压铸造法制备出二维碳纤维织物增强镁基复合材料，并对其基本性能进行了研究。
Two dimensional carbon fiber fabric reinforced magnesium matrix composites were prepared by squeeze casting technology, and their basic properties were studied.
铸造金属基自润滑复合材料具有良好的减摩、耐磨与减震性能，因而人们正在进行广泛的研究。
Cast metallic matrix self-lubricating composites, which possess excellent antifriction, wear resistance, damping capacity, etc., have been investigated extensively.
使用扫描电镜和透射电镜对复合材料及铸造残余物进行表征。
The composite and cast residue was characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM).
研究了真空熔铸法制备的锰白铜基铸造碳化铬复合材料的二体磨料磨损机理。
The abrasion wear mechanism of Mn copper-nickel alloy matrix-cast chromium carbide composite was studied.
实型铸造法具有制作铝-石墨粒子复合材料的潜力。
The full mould process had the potential to produce aluminium -graphite particle composite castings.
拌铸造法制备铝基复合材料的关键问题是搅拌浆的设计和搅拌参数选择。
The key problem of stirring cast is the design of stirring oar and the selection of stirring parameter.
对不连续碳纤维增强ZA - 12合金基复合材料的挤压铸造工艺进行了研究。
Fabrication technique of discontinuous carbon fibers reinforced ZA-12 alloy matrix composite was studied.
利用挤压铸造制备了氧化铝纤维增强锌合金复合材料，研究了氧化铝纤维对锌合金复合材料凝固组织的影响。
Alumina fiber reinforced zinc alloy composites were manufactured by squeeze casting, and the effects of alumina fibers on the solidified structures of the zinc alloy composites were studied.
以高铬铸铁为参考材料 ，研究了真空熔铸法制备的锰白铜基铸造碳化钨复合材料的二体磨料磨损特性。
The two body abrasion wear characteristic of Mn copper nickel alloy matrix cast tungsten carbide composite has been studied using high chromium cast iron as a reference material.
通过预先制备带有孔隙的硼铁合金预制块，用普通浇注的方法，获得以灰铸铁为基的铸造表面复合材料。
Using a prefabricated porous ferroboron lump, a surface composite layer was made on gray cast iron matrix, with a common casting method.
研究了碳钢/高铬铸铁双金属复合材料的离心铸造制备工艺及其耐磨性。
The centrifugal casting processing and wear resistance of of carbon-steel/high-Cr-cast-iron Bimetal composite were studied.
采用挤压铸造技术制备短纤维增强铝硅合金梯度复合材料，研究了这类材料的凝固组织和耐磨性能。
The short fiber reinforced aluminum silicon alloy gradual composites are manufactured by squeeze casting, and the structures and the wear resistance of the composites are studied.
用挤压铸造工艺制备了钛酸钾晶须增强铝基复合材料，研究了其热膨胀系数和热循环尺寸稳定性。
Aluminum matrix composites reinforced with potassium titanate whiskers were prepared by squeezing casting process. The thermal expansion and dimensional stability of such composites were investigated.
研究了以铸造废砂为填料、废旧地膜为基体，制备复合材料的界面问题。
The interface of the composites made of waste foundry sand as fillers and waste mulching films as matrix was studied.
结果表明，挤压铸造法是制造不连续碳纤维增强锌合金复合材料的简便、有效方法。
Experimental results show that discontinuous carbon fibers reinforced ZA-12 alloy matrix Composite can be fabricated availably by squeeze casting.
应用复合材料设计原理和铸造技术相结合，制备出用于磨损工况的强力抗磨局部复合材料。
Combing with design mechanism and foundry technology, powerful wear-resistant parts of composites used for wearing condition have been made.
采用搅拌铸造法，在纯铝中加入粉煤灰微珠颗粒作为增强体，制备铝基粉煤灰微珠复合材料。
The effect of various parameters on aluminum matrix composite including fly ash micro-sphere particles act as reinforced phase was investigated by using stirring casting technique.
铸造法是生产复合材料的主要方法之一。
综述了利用外力场（离心铸造法和电磁分离法）制备自生梯度复合材料的研究现状。
The developing level of the technology of producing in-situ gradient composites in outside force field (centrifugal method and electromagnetic separation method)has been reported.
本文重点研究了离心铸造铝基复合材料梯度功能盘状零件的成形工艺。
The main task of this paper is to research the processing of functionally gradient disc-like parts by centrifugal casting.
利用挤压铸造制备了纤维增强铝合金复合材料，研究了复合材料的界面偏析。
Fiber reinforced aluminum alloy composites are manufactured by squeeze casting. Segregation at interface of the composites is studied.
一纳米复合材料的结构，可形成铸造，存放或组成，包括纳米复合粒子材料。
A nanocomposite structure may be formed by casting, depositing or forming the material including nanocomposite particles.
利用挤压铸造制备了氧化铝纤维增强铝硅合金复合材料，研究了这种材料的界面对其耐磨性的影响。
A alumina short fibre reinforced aluminum silicon alloy composite is manufactured by squeeze casting. The effect of the composite's interface on its wear resistance is studied.
铸造法是目前最主要的一种制备颗粒增强铝基复合材料的方法。
The casting process is the most important method of fabrication paniculate-reinforced aluminum matrix composites now.
同时还介绍了铸造铝合金-金属陶瓷复合材料的试验情况及发展前景。
Meanwhile the paper also presents the experimental information and developing prospects of the cast aluminium alloy-ceramic metal compound material.
同时还介绍了铸造铝合金-金属陶瓷复合材料的试验情况及发展前景。
Meanwhile the paper also presents the experimental information and developing prospects of the cast aluminium alloy-ceramic metal compound material.
应用推荐