用刀刮去铸模杯顶部多余的铸粉。
匹配上下铸模，做好浇铸金属的准备。
混凝土构件显示铸模及木纹。
The concrete elements show the molds, as well as the wood grains.
有压铸模具设计经验者优先。
测试必须根据铸模或者产品批次进行。
硅橡胶和熟石膏作铸模亦已取得成功。
Silicone rubber and plaster of Paris have been used successfully.
硅橡胶和熟石膏作铸模亦已取得成功。
Silicone rubber and plaster of paris have been used successfully .
将混合物注入已预热到同样温度的铸模内。
The mixture is poured into the mould preheated to the same temperature.
缝隙将是构件的铸模。
我们能够制造新的铸模作为%的要求，我们的顾客。
We are able to fabricate new moulds as per the requests of our customers.
本公司是一家专业的塑胶模具、压铸模具制造厂家。
The Company is a professional plastic mold, die-casting mould manufacturer.
适用于：酸性电镀铜、线路板、电铸模、制版电镀等。
Apply to: apply to: acid electroplated copper electric circuit board electroforming mould and electroplating for printing plate making etc.
铸模，一个碗，一个小铲和一个用于存放铸模的纸板盒。
A casting kit might include multiple casting compounds (dental gypsum, Silicone rubber), snow wax (for making a cast in snow), a bowl, a spatula and cardboard boxes to hold the casts.
压铸模具的型芯变形失效很容易造成铸件的成批量报废。
During die casting, core deformation resulting in batches rejected castings is very easy.
通过上述方法可提高压铸模的设计效率，缩短设计周期。
By above methods, the design efficiency is increased and the design periods is shortened.
在冷却期间或冷却后，把铸件从铸模中取出，然后进行交付。
During or after cooling, the cast part is removed from the mold and then processed for delivery.
冒口是在铸模内部增加的额外空间，用于容纳过多的熔化金属。
A riser is an extra void created in the mold to contain excessive molten material.
采用宏观分析、显微检验和硬度测定对压铸模进行了失效分析。
This failure analysis was performed by using macro check, micrography and hardness measurement.
粘砂土湿粘土和砂子的混合物，带有稻草，专用作制砖和铸模。
A mixture of moist clay and sand, together with straw, used especially in making bricks and foundry molds.
工匠们试了几次，每次铸模时，他们都非常小心，而且每个人都检查了模子。
The artisans tried over and over again. Every time they made the mold very carefully, and everybody inspected the mold.
它们也装卸汽车和卡车框架的机器中所有的炽热、笨重的金属铸模。
They also load and unload hot, heavy metal forms used in machines casting automobile and truck frames.
现在，当我提出铸模这个时候我有一个小频道的根源，每一个附庸。
Now when I made the molds this time I have a small channel at the root of each appendage.
它们也用于装卸铸造汽车和卡车框架的机器中炽热、笨重的金属铸模。
They also load and unload hot, heavy metal forms used in machines casting automobile and truck frames.
利用SU-8光刻胶制备电铸模和微电铸工艺，制造了二维微执行器原型。
The prototype of the micro actuator is fabricated by means of micro electroforming and SU-8 photolithography techniques.
橡胶和塑料机械。反应铸模机械。第1部分：计量和混合元件的安全要求。
Rubber and plastics machines. reaction moulding machines. part 1: safety requirements for metering and mixing units.
在这几十年，我们找出了制作分子塑胶铸模的方法，也开始有外来的经费挹注。
Over the decades we figured out ways to make plastic imprints of molecules, and outside funds started coming in.
铸造是一种将熔化的金属倒入或注入合适的铸模腔并且在其中固化的制造工艺。
Casting is a manufacturing process in which molten metal is poured or injected and allowed to solidify in a suitably shaped mold cavity.
有工程类产品的销售和市场经验，最好具备精密类压铸模零件或塑胶模具经验。
Experience in sales and marketing of engineering products, preferably with the experience in precision die-cast components or plastic mouldings.
砂芯座是加在型模、砂芯或铸模上的特定区域，用来在铸模内部定位和支撑砂芯。
Core print is the region added to the pattern, core, or mold that is used to locate and support the core within the mold.
砂芯座是加在型模、砂芯或铸模上的特定区域，用来在铸模内部定位和支撑砂芯。
Core print is the region added to the pattern, core, or mold that is used to locate and support the core within the mold.
应用推荐