在这项实验中,英国布里斯托尔大学的科学家们培养了一层细胞,将一面暴露于钴铬纳米粒子。
In the experiment, scientists from the University of Bristol grew a layer of cells and exposed one side to cobalt-chromium nanoparticles.
其他重要的非洲出口商品是铁矿石和木材,其次还有锰、钴、铜和铬。
Other important African export commodities are iron ore and timber, followed by manganese, cobalt, copper and chromium.
而超合金——钴、钛和铬——则用于飞机引擎等特种工程制造行业。
Super alloys - cobalt, titanium and chrome - are used in such specialised engineering manufacturing as jet engines.
制作磁隧道结的通用材料有二氧化铬和铁钴合金。
Common materials for the MTJ include chromium dioxide and iron-cobalt alloys.
可以用于铸造的材料类型有:铝合金、青铜、工具钢、不锈钢、钨铬钴合金、镍基合金和贵金属。
Thee types of materials that can be cast are aluminum alloys, bronzes, tool steels, stainless steels, stellite, hastelloys, and precious metals.
钨铬钴合金6阀座面,使用寿命更长。
部分金属如钴、镍、铬等在高温熔化状态可以对元件造成侵蚀,影响元件的寿命。
Some metals such as cobalt nickel chrome and so on can corrade the element in high temperature melting state and affect the service life of element.
钨铬钴合金面耐磨性优于13CR楔板,而且更易于维修和更换。
Stellite face will wear less than the 13 CR wedge, which can easily be repaired or replaced.
含钛的钴铬合金用来制作这个支架。
A cobalt chromium alloy with titanium was used for the fabrication of the framework.
钨铬钴合金的硬度不会受到热处理的影响。
目的研究在不同参数设置下激光焊接对钴铬合金焊接强度的影响。
Objective To study the effect of different factor settings on the strength of Co Cr alloy welded by laser.
目的对可摘局部义齿支架变形问题进行分析,探索钴铬合金熔模铸造支架产生变形的原因。
Objective To investigate the deformation of the removable partial denture and the reason of deformation of framework by Co - Cr alloy investment casting.
为了延长使用寿命,阀瓣可以涂上一层钨铬钴合金。
To extend the life of the valve flap can be coated with stellite.
与单化学沉淀方法比,本工艺流程具有铬、钴的回收率高,工艺路线简单,可以节约成本的特点。
The characteristic of this technical process is higher recovery rate of cobalt and chromium, simpler technological route and lower cost, compared with the single chemistry precipitation.
阀座环较长,并且是密封焊接的,能够补偿温度波动。阀座面用钨铬钴合金6硬化,研磨和层叠为镜面光洁度。
Seat rings are long to compensate for temperature fluctuations and are seal - welded. seating faces are hardfaced with stellite 6, ground and lapped to mirror finish.
通过剪切强度的测试评价了其对复合树脂与钛合金、钴铬合金之间的粘接所起到的作用。
The effect of this product on the bond durability of composite resin joined to Ti alloy or Co-Cr alloy was evaluated.
目的研制用于研抛钴铬合金铸件的超声波研抛仪。
Objective To develop the dental ultrasonic polishing instrument used in polishing chromium cobalt castings.
采用人工合成高纯度的羟基磷灰石粉末,喷涂在具有注册证的钛合金和钴铬钼合金人工关节上。
Artificial hydroxyl apatite powder with high purity is applied onto the surface of the registered artificial joints made of titanium and cobalt alloy.
目的对135例急性心肌梗死患者血清中的铬、钴、镍、钒、钼的含量检测并与对照组比较。
Objective To compare chromium, cobalt, nickel, vanadium and molybdenum contents in serum of 135 patients suffering from acute myocardial infarction with that of control group.
本文通过焊接试验、显微分析和磨损试验论述了以铬、镍、铁基合金代替钴、铬、钨合金作石油钻头牙爪堆焊耐磨合金的问题。
In this article we discussed the possibility of replacement of cobalt alloy by Cr-Ni iron Base alloy in drill bit bearing on the basis of welding test, wearing test and microscopic examination.
试验研究了钴铬合金口腔修复材料微束等离子弧焊的可行性。
The article discussed the feasibility of micro-plasma arc welding Co-Cr alloy for oral cavity repair.
化学法测定胫骨钙和磷含量,原子吸收分光光度法测定铁、锌、镁、锰、铜、钴、铬和钼等微量元素的含量。
The contents of calcium and phosphate in tibias were determined by chemical analysis and the trace elements were detected by atom absorption spectrophotometer.
结论:在所有烤瓷程序结束后,应将钴铬合金支架进行彻底打磨、抛光。
Objective:To investigate the effect of porcelain bake cycles on oxide layer formed on cobalt-chromium alloy surface.
目的:探讨空气环境对多次铸造的钴铬合金机械性能的影响。
Objective: To investigate the effect of recasting on physical properties of a cobalt-chromium alloy in air environment.
目的:评价牙周植骨术联合夹板式钴铬合金烤瓷联冠保留末端松动牙的临床疗效。
Objective: to evaluate the effects of bone graft combined porcelain fused to Co-Cr metal crowns splint treatment for conserving liven abutment.
目的研究一种能同时用于烤瓷修复和可摘局部义齿铸造支架的新型钴铬钼合金。
Objective to investigate a kind of Co-Cr-Mo alloys used for both porcelain fused to metal (PFM) restorations and casting framework of removable partial dentures.
钨铬钴合金面阀座,经过研磨抛光达到镜面抛光度。
目的比较不同包埋材料和包埋方法对铸造钴铬合金全冠收缩的影响。
Objective To compare the influence of different investment materials and methods on the cast shrinkage of full crowns made of Co-Cr alloys.
目的比较不同包埋材料和包埋方法对铸造钴铬合金全冠收缩的影响。
Objective To compare the influence of different investment materials and methods on the cast shrinkage of full crowns made of Co-Cr alloys.
应用推荐