钨铬钴合金6阀座面,使用寿命更长。
焊接连接阀座采用钨铬钴合金6阀座面。
钨铬钴合金的硬度不会受到热处理的影响。
适用于低温环境的钨铬钴合金阀座面的柔性楔板。
Flexible wedges with Stellite seating faces for cryogenic service.
为了延长使用寿命,阀瓣可以涂上一层钨铬钴合金。
To extend the life of the valve flap can be coated with stellite.
钨铬钴合金面阀座,经过研磨抛光达到镜面抛光度。
阀座面为钨铬钴合金,经过研磨抛光达到镜面光洁度。
钨铬钴合金可以进行高度抛光,可用于钢阀门的密封环。
Stellite takes a high polish and is used in steel valve seat rings.
钨铬钴合金面耐磨性优于13CR楔板,而且更易于维修和更换。
Stellite face will wear less than the 13 CR wedge, which can easily be repaired or replaced.
实心钨铬钴合金6阀瓣,即使没有弹簧,也可适用于快速和完整阀座的全引导。
Solid Stellite 6 disc, fully guided for fast and full seating, even without spring.
可以用于铸造的材料类型有:铝合金、青铜、工具钢、不锈钢、钨铬钴合金、镍基合金和贵金属。
Thee types of materials that can be cast are aluminum alloys, bronzes, tool steels, stainless steels, stellite, hastelloys, and precious metals.
阀座环较长,并且是密封焊接的,能够补偿温度波动。阀座面用钨铬钴合金6硬化,研磨和层叠为镜面光洁度。
Seat rings are long to compensate for temperature fluctuations and are seal - welded. seating faces are hardfaced with stellite 6, ground and lapped to mirror finish.
制作磁隧道结的通用材料有二氧化铬和铁钴合金。
Common materials for the MTJ include chromium dioxide and iron-cobalt alloys.
而超合金——钴、钛和铬——则用于飞机引擎等特种工程制造行业。
Super alloys - cobalt, titanium and chrome - are used in such specialised engineering manufacturing as jet engines.
含钛的钴铬合金用来制作这个支架。
A cobalt chromium alloy with titanium was used for the fabrication of the framework.
目的研究在不同参数设置下激光焊接对钴铬合金焊接强度的影响。
Objective To study the effect of different factor settings on the strength of Co Cr alloy welded by laser.
目的对可摘局部义齿支架变形问题进行分析,探索钴铬合金熔模铸造支架产生变形的原因。
Objective To investigate the deformation of the removable partial denture and the reason of deformation of framework by Co - Cr alloy investment casting.
本文通过焊接试验、显微分析和磨损试验论述了以铬、镍、铁基合金代替钴、铬、钨合金作石油钻头牙爪堆焊耐磨合金的问题。
In this article we discussed the possibility of replacement of cobalt alloy by Cr-Ni iron Base alloy in drill bit bearing on the basis of welding test, wearing test and microscopic examination.
结论:在所有烤瓷程序结束后,应将钴铬合金支架进行彻底打磨、抛光。
Objective:To investigate the effect of porcelain bake cycles on oxide layer formed on cobalt-chromium alloy surface.
目的:探讨空气环境对多次铸造的钴铬合金机械性能的影响。
Objective: To investigate the effect of recasting on physical properties of a cobalt-chromium alloy in air environment.
目的研究一种能同时用于烤瓷修复和可摘局部义齿铸造支架的新型钴铬钼合金。
Objective to investigate a kind of Co-Cr-Mo alloys used for both porcelain fused to metal (PFM) restorations and casting framework of removable partial dentures.
目的:研究钴铬合金铸造卡环的弹性形变限度及其相应卡抱力。
Objective: the aim of this study was to investigate the elastic deformation limit and relevant enclasp force of cobalt-chromium alloy cast clasps.
通过剪切强度的测试评价了其对复合树脂与钛合金、钴铬合金之间的粘接所起到的作用。
The effect of this product on the bond durability of composite resin joined to Ti alloy or Co-Cr alloy was evaluated.
试验研究了钴铬合金口腔修复材料微束等离子弧焊的可行性。
The article discussed the feasibility of micro-plasma arc welding Co-Cr alloy for oral cavity repair.
采用人工合成高纯度的羟基磷灰石粉末,喷涂在具有注册证的钛合金和钴铬钼合金人工关节上。
Artificial hydroxyl apatite powder with high purity is applied onto the surface of the registered artificial joints made of titanium and cobalt alloy.
本研究为钴铬合金的回收再利用提供了可靠的理论依据。
Our study provide valuable basis of the theory for recovering and using Co-Cr alloy.
目的研制用于研抛钴铬合金铸件的超声波研抛仪。
Objective To develop the dental ultrasonic polishing instrument used in polishing chromium cobalt castings.
本文选用人牙龈细胞,对牙科常用的钴-铬-钼铸造合金进行细胞毒性的研究。
The cytotoxicity of Co-Cr-Mo dental casting alloy has been studied by using gingiva cells.
医用高氮无镍奥氏体不袗的溶血率低于1%,抗溶血性能明显优于钴铬合金和316l不袗。
The hemolytic rate of BHNNFASS was less than 1%, and the result of hemolytic test of it is clearly better than that of 316l stainless steel and Co-Cr alloy.
目的:测试激光焊接铁铬钼软磁合金与钴铬合金的机械性能,为临床应用提供参考。
Objective: to explore the mechanical properties of laser welds of Fe-Cr-Mo magnetizable alloy and cobalt-chromium alloy so as to give reference for clinical work.
应用推荐