下模具为铝模，上模具为气囊模。
The upper mold is aluminum mold , the lower mold is air chamber mold .
胶模采用耐磨热硅胶；外铝模温度可达200。
The pastern mold adopts wearable and heat-resistant silica gel the aluminium mold can come to200.
铝锭、铝板、铝线、拔丝线铝合金、铝合金门窗，生铝、熟铝、合金铝、铝粉、铝模、铝渣。
Aluminum ingots, aluminum, wire, wire drawing aluminum wire, aluminum alloy doors and Windows, aluminum, cooked aluminum, aluminum alloy, aluminum powder, aluminum mold, aluminum slag.
大约有一半的铸铝工艺是高压模铸(HPDC)，在这种工艺中，通过压力将液态铝合金注入钢模，或模具。
About half of all aluminium castings are made using high-pressure die-casting (HPDC), in which a molten aluminium alloy is injected under pressure into a steel mould, or die.
而沸腾钢从冶炼直至钢模中、韧性、硅铁或铝来脱氧。
The boiling steel from smelting until the steel mold, toughness, ferrosilicon or aluminum deoxidation.
研究了各工艺因素对消失模铸造铝液在型腔中平均流速的影响。
Effects of various process variables on average flow velocity of LFC liquid aluminum in the mold have been studied.
分析了铝钎焊料的加工工艺，说明了聚氨酯橡胶模的性能和优点。
The manufacture process of aluminum foil was analyzed, explained the performance and the merit of the polyurethane rubber punching die.
根据对比铝热焊与手弧焊修复工艺，阐明了用铝热焊修复钢锭模是一种高效、节能、焊接质量好的新方法。
By comparison with manual arc welding, it is found that the thermit welding is a efficiency, energy saving and high quality process for repair welding of steel ingot die.
试验研究了浇注后型腔压力对消失模铸造的铝件表面状态、力学性能影响的趋势。
Influence of pressure applied on the mold after pouring on the surface status and mechanical properties of aluminum castings in lost foam casting is investigated.
是一家专业铸造锌基合金、铝基合金鞋模的厂家。
It is the manufacturer that a major casts model of shoe of zincic radical alloy, aluminium radical alloy.
目前公司在对铝翻砂工艺与钢模浇注技术进行改良后，独家采用铝压铸制造和环保型喷塑工艺。
After improving the aluminum foundry and steel casting technology, our company uses the aluminum die-casting manufacturing technology and enviroment-friendly spray exclusively.
介绍了铝热焊修复钢锭模的工艺过程。
The procedure of thermit welding for repair of the ingot die is presented in the paper.
一种铝硅模铸合金，具有非常低的铁含量和相对较高的锶含量，用来防止在模铸过程中焊接在模具上。
An aluminum silicon die cast alloy having a very low iron content and relatively high strontium content that prevents soldering to dies into die casting process.
我雕凿轻质砖为模，再用铝做浇铸，试图找到简单但有力量感的形态。
I carve into the breeze block and cast in aluminium, trying to find forms that are simple but powerful.
我们现在提供单模和多模光纤高温铝或铜合金涂层。
We now offer single-mode and multimode mode fibers with high temperature aluminum or copper alloy coatings.
如：全自动离心机、全自动压模机、熔铝炉等等系列技术含量高的产品。
Such as: automatic centrifuges, automatic machine dies, the aluminum melting furnace, etc. series of high technological content of products.
本机采用齿轮变速传动结构，串联组成多模连续拉丝机，可拉拔钢、铝或黄铜等金属线材。
This machine is equipped with a gear transmission mechanism, and its multi-dies are arranged in line. It can draw steel, aluminum, brass and other kinds of metal wires.
筋板、凸台部分或薄壁处为防止冷隔，要提高铝液流动性。模温应相对提高。
The number of stiffened plate, convex platform part or to prevent cold-lap thin-walled place, must improve liquid aluminum liquidity. Mould temperature should be relative improve.
探讨了铝液变质、晶粒细化、浇注温度及聚苯乙烯模样等对消失模铝铸件针孔的影响。
The effects of modification, grain refinement, polystyrene pattern, pouring temperature on aluminum alloy porosity in LEC process is studied.
铝体模来源：美国LUNAR公司生产的DPX - MD双能X射线骨密度仪所配备的自检模块。
Source of aluminum model: self-check die-block equipped by DPX-MD dual-energy X-ray bone densometer produced by American LUNAR Company.
研究了自冲铆接中模钉体积比对铝-钢以及钢-铝铆接接头的影响。
This paper developed the influence of die-rivet volume ratio on self-piercing riveting joints of Al-to-steel and steel-to-Al combinations separately.
研究了自冲铆接中模钉体积比对铝-钢以及钢-铝铆接接头的影响。
This paper developed the influence of die-rivet volume ratio on self-piercing riveting joints of Al-to-steel and steel-to-Al combinations separately.
应用推荐