铝锰，强度高，耐蚀。铝合金焊接用。
Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.
结果表明，7A52铝合金焊接性能较好。
The results show that the weldability of 7A52 aluminum alloy is good.
现在正在开发的方法后，耐酸铝及铝合金焊接树脂。
Now under development is the method of alumite after jointing aluminum alloy and resin.
铝硅，抗裂性好，通用性大。铝合金焊接用，不宜焊接铝镁合金。
Silic aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.
铝硅，抗裂性好，通用性大。铝合金焊接用，不宜焊接铝镁合金。
Silicon aluminum good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.
铝硅，抗裂性好，通用性大。铝合金焊接用，不宜焊接铝镁合金。
Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.
微型剪切试验为铝合金焊接接头力学性能的评定提供了一个新途径。
The micro shear test could give a new way to evaluate the mechanical properties in weld joint of aluminium alloy.
本文介绍了作者自行设计的铝合金焊接缺陷及工艺问题分析诊断专家系统。
The paper introduces an expert system for diagnosing weld defects and analyzing welding process problems.
本船为铝合金焊接双体客船，采用对称片体，单层甲板，设上下客舱，螺旋桨推。
This ship is an aluminum alloy welded catamaran passenger vessel, using symmetrical semi-hull, single deck, upper lower cabins and propeller driven.
本文介绍了俄罗斯焊接学者关于影响铝合金焊接接头性能的若干因素的研究点滴。
Some researches of influential several factors of welding join properties of aluminum alloy by Russia scholar was introduced.
本发明属于有色材料的加工领域，适用于所有铝及铝合金焊接 材料产品的批量生产；
The invention belongs to the machining field of colored materials, applied to batch production of all aluminum and aluminum alloy welding materials;
对不同焊接热输入下的6063铝合金焊接接头进行人工时效，分析其硬度分布和强度的变化。
Effects of artificial ageing on the hardness distributions and strength were analyzed for 6063 aluminum alloy joints welded by varying heat inputs.
采用云纹分析的试验力学方法，研究了不同情况下LY 12 CZ高强铝合金焊接接头应变场的分布特点。
Using experimental mechanical method of moire analysis, strain field distributions of LY12CZ aluminum alloy welded joints under different conditions were investigated.
摘要：研究了不同湿度条件下A 5083铝合金焊接气孔的敏感性，并讨论了气孔对焊缝力学性能的影响。
Abstract: Study on the sensitivity of stomatal A5083 Aluminum Alloy under different humidity conditions of welding, and the effects of porosity on the mechanical properties.
同时用微型剪切试验研究了几种铝合金焊接接头的自然时效的微区性能变化和焊接规范对铝合金焊接接头性能的影响。
At the same time, using the micro-shear test result to study the micro-performance changes in natural aging of several Al-alloy joints, and the influence of Al-alloy joint by welding parameters.
为了采用图像处理与模式识别的方法对铝合金的焊接质量进行智能控制，必须获取铝合金焊接熔池的清晰图像，然后提取焊接熔池的信息。
In order to control the quality of welding by image processing and pattern recognition, the clear image of the welding pool of aluminum alloy and the information of the welding pool must be obtained.
结果表明，一定时间的热循环会造成LF6铝合金焊接接头断裂机理的改变，由未经热循环时的纯剪切型断裂，逐渐过渡成微孔聚集型断裂。
The results show a certain time thermal cycle can cause the fracture mechanism change. It varies from original pure shear fracture to microvoid coalescence fracture gradually.
采用真空热循环试验装置，模拟近地轨道空间环境，研究了LF 6铝合金焊接接头拉伸性能和微观组织，分析讨论了真空热循环对焊接接头的影响规律。
The tensile properties and microstructure of LF6 aluminum alloy weld joint under simulating near earth space environment are studied by means of vacuum thermal cycling system.
第二，也是最重要的一点，很多高强度铝合金不可使用惯用的技术焊接。
Second, and most importantly, many of the strongest aluminum alloys are not weldable using conventional techniques.
同时，对铝及铝合金的焊接趋势进行了展望。
The development tendency of aluminium alloy welding is forecast as well.
概述了以激光为热源的铝及铝合金激光焊接技术特性。
The technological properties of laser welding for aluminum and aluminum alloys are described.
针对质量问题提出了解决措施，并论述了铝合金激光焊接在国内外的应用。
Meanwhile, points out the improving measures of quality and the applications of laser beam welding aluminium alloys.
B120型地铁铝合金车体为整体承载全焊接结构，主要采用大型中空铝合金型材组焊而成。
The type B120 metro vehicle aluminum car body is overall load bearing structure, which is mainly made from large aluminum extrusions connected by welding.
利用高功率CO2激光器，对5083型号的铝合金薄板进行了焊接试验研究。
Laser welding of 5083 aluminum alloys with high power CO2 laser is experimental studied in this paper.
对两种形式的温差拉伸控制铝合金薄板焊接残余变形的效果和规律进行了研究。
The effects of distortion control in welding thin aluminum alloy plates by two kinds of thermal tensioning were investigated.
介绍复杂结构铝合金仪器箱体焊接及机加工中出现裂纹的原因及防止措施。
The reason and measure prevented the structure from cracking in welding and machining aluminium alloy frame and shell of apparatus box are discussed in the paper.
铝合金MIG焊接过程动态检测与控制是提高焊接质量的重要手段。
It is an important method which improve the welding quality by tested and controlled aluminum alloy MIG welding process dynamically.
铝合金MIG焊接过程动态检测与控制是提高焊接质量的重要手段。
It is an important method which improve the welding quality by tested and controlled aluminum alloy MIG welding process dynamically.
应用推荐