尼龙材质或铜镀镍防水锁。
尼龙材质或铜镀镍防水锁。
它有锌，铜镀黑色聚合物，镍等的卷筒或纸箱。
It is available in zinc, brass plated black polymer, nickel etc. on reels or cartons.
聚酰胺，聚碳酸酯，聚苯乙烯，铜镀镍，不锈钢。
Polyamide, Polycarbonate, Polystyrene, Nickel-plated brass, Stainless steel.
用研究的焦磷酸盐镀铜工艺代替氰化镀铜工艺作为过渡铜镀层的无氰镀工艺。
The process of cyanide copper electroplating is replaced by the proposed process of pyrophosphate electroplating copper on magnesium alloy.
采用1286电化学接口及旋转圆盘电极测定了硫酸铜镀液阴极极化曲线和循环伏安曲线。
Cathodic polarization curve and cyclic voltammetric curve of sulfate copper plating solution are determined with 1286 electrochemical interface and rotating disc electrode.
感应探头下侧设置卡环，卡环为侧面开口的圆环结构。卡环由导热性能好的铜镀镍材料制成。
A snap ring is arranged at the underside of the inductive probe, takes a ring structure with a lateral opening and is made of dumet materials that have good heat conductivity.
为了获得电镀的最佳结果，在生产中对珍珠镍、光亮镍、酸性铜和黄铜四种镀液的成分参数进行了统计分析。
The component data of pearl nickel, bright nickel, acidic copper and brass plating solution in production were analyzed when the best result of the plating deposit obtained.
提出了一种有较高沉铜速率和稳定性的碳纤维化学镀技术。
An electroless deposition technique on carbon fiber with higher copper deposition rate and stability was presented.
本文主要介绍了镀镍液中杂质铜、铁的快速分析和调整方法。
This article introduces a rapid analysis and adjustment of the copper and ferrum impurities in nickelage solution.
通过实验手段，研究了稀土对电沉积法制备泡沫铜化学预镀工艺的影响。
The effect of rare earths on the chemical pre-plating process for electro-deposition of foamy copper was studied through experiments.
适于织物化学镀的金属是铜和锋，孰优？
Metals suitable for electroless metal plating on fabrics are copper and nickel.
无氧铜的反射率为0.021，单层膜的反射率为0.049，因此KBAX射线显微镜可采用镀单层膜的方法加工。
Reflectivity of Cu is 0.021 and that of single film layer is 0.049, thus KBA X-ray microscope is made of single film layer.
应用化学镀层法对改性后的CNT镀镍、铜及镍铜混合镀层技术进行了一系列研究。
The plating (layers) such as Ni, Cu and Ni-Cu formed on the CNTs surface by chemical plating process were investigated.
采用电阻加热式真空蒸镀法在玻璃、H 13钢、塑料和纯铜基体上镀制铝膜，并对其附着力进行了测试和分析。
Aluminum film is produced on glass, H13 steel, plastic and pure cu substrate by resistance heating vacuum evaporation, and the adhesive power of aluminum film is determined and analyzed.
作者对镀镍钢帽的物理性能进行了测试，并对镀镍钢帽电池和铜帽电池的电性能作了对比试验。
The properties of nickel plated steel cap were tested. And the electrical properties of nickel plated steel cap and copper cap for battery application were compared.
用化学镀法制备了镍包铜粉，并利用固相烧结法将镍包铜粉成功地制成了块状烧结体。
Nickel plat copper powders were prepared by electrolytic plating and bulk sinters of nickel-coated copper powders were prepared by sintering.
适用于一切带有锈蚀的钢、铁、铜等金属制件的除锈处理，也适用于工序间涂镀前的除锈处理。
Suitable for the rust removal made one of such metal as all steel , iron , copper with corrosion , etc.
坚固的镀镍铜夹引线时，不会引发最初连接到电池，以减少爆炸的可能性。
Rugged nickel-plated copper clip leads won't spark when initially attached to a battery to reduce the possibility of an explosion.
通过实验分别测定了酸性镀铜光亮剂ubac1a和镀液中硫酸铜的吸收曲线。
The absorption curves of the brightener UBAC 1a of bright acid copper plating and cupric sulfate of the bath were mensurated by experiments respectively.
在化学镀镍-磷合金液中加入硫酸铜制得镍-铜-磷三元合金。
Electroless nickel copper phosphorus ternary alloy deposits were prepared by addition of cupric sulfate in electroless nickel phosphorus alloy plating bath.
镀液单位体积的重量是焦磷酸钾和焦磷酸铜含量的函数。
The weight of copper plating solution in a unit volume was function of contents of cupric pyrophosphate and potassium pyrophosphate.
不锈钢、SUS301不锈钢条、琴线、碳钢、镀镍线、铁线、钉线、磷铜、青铜。
Stainless steel, SUS301 stainless steel, piano wire, carbon steel, nickel plating wire, iron wire, nail wire,. Phos-copper, bronze.
阐述了各工艺步骤的配方及操作条件。过渡层采用高堆积碱铜，工作层为快速刷镀镍。
Formula and operating conditions of the procedures were described, high-packed alkaline copper deposit was adopted to act as interlayer and fast nickel brush deposit as working layer.
所述的具有金属铜表面的基底材料是指金属铜片以及表面镀了一层纳米金属铜的导电玻璃ito。
The base material provided with metallic copper surface is a sheet copper and conductive glass ITO with metallic copper plated on surface.
通过循环伏安法、交流阻抗法研究了一种有机络合剂对有机镀液中镁-镍合金在铜上共沉积的影响。
The influence of an organic complexing agent AD on electrodeposition of Mg-Ni alloy in organic bath on Cu electrode was studied by using cyclic voltammetry and AC impedance methods.
用阳极氧化的方法制备了阳极氧化铝膜，向其孔中镀入了铜，制备了镶嵌铜多孔铝膜。
The porous aluminium coating inlaid with copper was obtained by implanting Cu into the pores of anodic oxidation aluminium coating prepared by electroplating.
在AZ31镁合金待焊表面镀一层很薄的铜层来研究塑性材料的流动情况。
A thin Cu coating was deposited on both sides of AZ31 magnesium alloy to be joined to study the material flow in friction stir welding.
提供了保护过程的技术细节，首先在光纤表面进行化学镀处理获得导电的薄镍层或铜层，然后在该导电层上进行电镀镍。
The fiber is firstly coated with a thin copper or nickel plate with electroless plating method. Then, a thicker nickel plate is coated on the surface of the conductive layer.
提供了保护过程的技术细节，首先在光纤表面进行化学镀处理获得导电的薄镍层或铜层，然后在该导电层上进行电镀镍。
The fiber is firstly coated with a thin copper or nickel plate with electroless plating method. Then, a thicker nickel plate is coated on the surface of the conductive layer.
应用推荐