介绍了大型变压器绕组用扁铜导线的焊接原理及其操作工艺。
Welding principle and its operating process of flat copper wire in large transformer windings are introduced.
分析了真空白耗电弧炉铜-不锈钢异种金属套管式电极杆焊接裂纹产生的机理。
The mechanism of welding crack generation in the copper - stainless steel tube electrode stem of Vacuum Consumable Arc Furnace has been analyzed.
以自制的锡银铜系焊粉为基础制备焊膏并做焊接模拟。
Take the powder of tin, silver and copper solder as the basis to make solder paste and simulate soldering.
因此，要得到理想的钎焊接头，必须合理调整铜层厚度及钎焊工艺参数。
So we must adjust the thickness of Cu layer and parameters in order to get ideal joints.
通过铜钢异种金属焊接容易产生缺陷的分析，采用合理的焊接工艺，以保证工件质量。
Through analyzing the imperfect of the welding of copper-steel profile metal, adopt reasonable welding technology to guarantee a quantity of work.
用扫描电子显微镜和能谱仪对钨和铜以及不锈钢的热等静压焊接试样的焊接界面进行了分析研究。
The SEM and EDS were used in this paper to analysis the welding interface of the specimens of tungsten and copper, copper and stainless steel made by HIP welding.
介绍了应用于海洋油气管道施工的坡口机、带铜衬垫对口器、全位置自动焊等焊接装备和焊接工艺。
The applies in the ocean oil gas pipeline construction bevel machine article, the belt copper liner welds and pipeline auto welding machine, welding equipment and welding procedure were introduced.
适用于碳钢、不锈钢、铜及其合金、铸钢的焊接。
Suitable for welding carbon steel, stainless steel, copper and its alloy, alloy steel and cast iron.
锻造铜在高温应用中具有很好的性能，易于采用焊接或铜焊进行连接。
Wrot copper performs well in high temperature applications and is easily joined by soldering or brazing.
为实现铜铝管的优质焊接，需要研制相应的焊接设备。
To realize superior welding of copper-aluminum pipe is demanded to manufacture the related welding units.
适用于铜材的焊接，例如铜和锡铜合金，尤其是用于铜锌合金和钢的连接焊。
Suitable for welding of copper materials, for example copper and tin bronzes , especially used for joining of copper zinc alloys and steels.
在分析了铜铝管焊接工艺过程的基础上，重点论述了铜铝管对焊机执行系统和控制系统的设计。
This paper, based on analyzing the process of Cu-Al pipe butt welding, discussed the design of the executive system and control system for PLC controlled Cu-Al pipe butt welder.
适用于碳钢，不锈钢，铜及其合金，合金钢，铸钢的焊接。
Suitable for carbon, steel, stainless steel, copper, titanium and cast iron welding.
用于焊接相同类型的含铜不锈钢设备。
Fwelding the equipment with same type stainless steels including the copper.
铜铝管焊接的关键是对焊接参数的控制，原控制系统采用时间继电器控制焊接参数。
The key of Cu-Al pipe butt welding is to control the welding parameters. In the original control system, all welding parameters were controlled by time-relays.
为实现铜-铝管的优质焊接，需要研制相应的焊接设备。
Special welding equipment must be developed, to achieve Cu-Al pipe weldment in high quality.
对于铝合金、铜、镁、锌合金铸造与焊接处之间的研磨性具有很好的效果。
The products have a good effect on grinding between cast soldering Aluminum, Copper, Magnesium, Zinc alloy.
实践证明，PL C控制型铜铝管对焊机的执行机构完全满足铜铝管优质焊接的要求。
In practice, the executive mechanism of PLC controlled Cu-Al pipe butt welder meets the expectation for high quality Cu-Al welding completely.
研究了含铜时效钢焊接热影响区的组织与性能。
The microstructure and mechanical properties of a copper bearing age hardening steel were studied.
提出一种制作铜-康铜热电偶的新方法：锡膜焊接法。
Tinfoil welding technique was employed to make copper-constantan thermocouples.
某些焊锡膏对于镀锡表面具有良好的效果，但对裸铜osp的焊接效果则很差。
Some pastes do well with tinned surfaces but solder poorly bare copper OSP.
适用于铜镍合金的焊接和堆焊。如化工设备、海水淡化、海洋结构、造船、石油精炼、食品工业以及耐蚀装置和容器等。
Particularly suitable for the joining and overlay welding of copper nickel such as machinery, desalting of seawater, ship-building, oil refinery, and food processing industries.
本研究探索了一种新的焊接工艺方法—熔敷扩散焊接方法，采用该方法在30口径弹体上焊接纯铜弹带取得成功。
It is successful to re-melt deposit pure copper rotating band on D-30 shell body by using the process.
找出了用通常方法不能点焊纯铜的原因，介绍了纯铜点焊焊核形成的过程，指出以本文为依据正确地选择电极材料、电极形状、焊接设备和确定焊接规范，就可实现纯铜的直接点。
It points out that the direct spot welding of pure copper can be realized by the correct choice of pole material, pole form, welding equipment and criterion.
铜、银焊接中极其清洁的燃烧，FXD提供了更好铝、黄铜铸铁焊接。
FXD gives greater advantages for aluminum, brass, and cast iron welding, brazing and silver soldering by extremely clean burning.
用途广泛，使用于铝、铜、铁、锌、不锈钢、普通钢、镍、钨、合金以及异类金属之间的焊接。
Wide-ranged applications, especially in the welding of copper, iron aluminum, steel, stainless steel and alloy.
适用于不锈钢、铜、碳钢的薄板焊接，高效节能产品。
It is applicable for welding the sheet metal of stainless steel, copper, carbon steel as the energy saving products with High efficiency.
适用于不锈钢、合金钢、碳钢、铜和其它有色金属。特别适宜于铝及铝合金制品的焊接。
Applicable for stainless steel, alloy steel, carbon steel, copper and other non ferrous metals, it is particularly suitable for welding aluminum and aluminum alloy products.
在分析了铜铝管焊接工艺过程的基础上，重点论述了铜铝管对焊机执行系统和控制系统的设计。
The executive mechanism of Cu-Al pipe butt welder, based on above, was designed, including its air system and mating clamper.
铜—镍、镍—钛、铜—钛、钛—钼、黄铜—铜、低碳钢—铜等多种异种金属间的焊接。
Copper - nickel, nickel titanium, copper - titanium, titanium - molybdenum, brass - copper, mild steel - copper and other dissimilar metal weld between.
应用推荐