铜导电比其他物质更好。
铜导电。
以改性树脂和混合树脂为粘料，铜粉为导电性填料，并配以适当添加剂、固化剂制备铜导电胶。
Copper conductive adhesive is prepared by using modified resins and mixed resins as cohesive materials and Copper powders as conductive fillers.
将铜导电胶进行热老化、自然老化、耐水等试验，以研究其老化性能，并探求改善铜胶抗老化性能的途径。
Heat ageing, natural ageing and water tolerance etc. tests are carried out to study and improve the ageing resistance of copper conductive adhesive.
铜的导电性能好。
铜卓越的导电能力和导热能力意味着它不仅用于制造全球的电缆和管道。
Copper's excellent conduction of electricity and heat means that it is used not only to cable and pipe the globe.
之所以使用铜是因为它导电性能良好。
最常见的导电材料是铜。
目前许多韩国公司使用含银或者铜的导电涂料，它们主要是从美国进口的。
Currently many Korean companies use the conductive paints comprising silver or copper, which are mainly imported from America.
研究了不同增强颗粒、制备工艺的不同环节对铜基复合材料导电性能的影响。
The influences of different particles and different link of fabricating technology on electrical conductivity of copper - matrix composites were studied.
金属铜与塑料的膨胀系数比较接近，因此，在塑料电镀中常用化学镀铜层作为电镀的导电镀层。
Copper and plastic coefficient of expansion, and, therefore, more close to the plastic used in electroplating electroless copper plating coating layer as conductive.
铜的导电性能良好。
绝缘层一般为纯天然橡胶，铜丝为无氧铜，这样，才能保证线芯的良好导电性及电缆的安全性。
The insulating layer is pure natural rubber, copper wire for copper, so, in order to ensure the safety of wire and cable of good conductivity.
铜的属性之一是，它具有很好的导热和导电性。
One of the properties of copper is that it conducts heat and electricity very well.
铝的导电性比铜差。
从理论上讨论了铜粉丙烯酸酯胶粘剂的导电机理。
The conductive mechanism of copper powder acrylate adhesive composite was discussed.
结果表明，随着铜含量的增加，热挤压坯料的相对密度增加，同时相对导电率、相对热导率和硬度值也提高。
The experimental results show that the relative density, hardness, relative specific conductance and heat conductivity of the billets are increased with increasing percentage composition of Cu.
以环氧树脂为基体，间苯二胺和二氨基二苯甲烷的低融点混合物为固化剂，铜粉为导电填料，制备了热固化各向同性导电胶。
Copper conductive adhesives were prepared using epoxy as matrix, the mixture ofm-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the conducting filler.
三角结构的外层导电铜轮分内外两沟，铜线经内沟引入，完成退火。
Triangular structure of the outer conductive copper wheel points inside and outside two groove, the copper wire inside groove introduced, complete annealing.
铜的导电性比铁强。
以环氧树脂为基体，间苯二胺和氨基二苯甲烷的低融点混合物为固化剂，铜粉为导电填料，制备了热固化各向同性导电胶。
Copper conductive adhesives were prepared using epoxy as matrix, the mixture ofm-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the con-ducting filler.
借助金相显微镜、TEM、SEM/EDS、XRD及电导仪研究了热处理对铜基多元合金导电性能的影响。
The effect of heat treatment on electrical conductivity of Cu based multi-component alloy was studied by metallographic microscope, TEM, SEM/EDS, XRD and conductance instrument.
通过测试力学性能和导电性能，对铜铬合金进行了冷变形及退火工艺的探索，并进行了强化机理分析。
Cold deformation and heat treatment have been studied through testing mechanical property and conductivity of Cu-Cr alloy, and strengthening mechanism has been presented in the paper.
可高效的切割铝、钢、铁、铜、钛金板及其他导电金属。
It could cut aluminum, steel, iron, copper, and Ti-gold sheet as well as other conductive metals.
铜的导电性能比别的材料好。
铜的导电性能比其他材料好。
研究了有机膨润土防沉剂对铜系导电涂料的沉降率、黏度、触变性、涂层导电性及显微形态的影响。
The influence of organobentonite on sedimentation ratio, viscosity, thixotropy, film conductivity and micromorphology of the copper based conductive paint is investigated.
铜的导电性能比其他材料好。
结果表明：通过控制工艺参数可以获得镀覆质量好，且具有很好导电性和低松装密度的片状锡包铜粉产品。
The results indicate that good coating quality tin coated flake Cu powder with well electric conductivity and loose specific gravity can be obtained by controlling technological parameters.
结果表明：通过控制工艺参数可以获得镀覆质量好，且具有很好导电性和低松装密度的片状锡包铜粉产品。
The results indicate that good coating quality tin coated flake Cu powder with well electric conductivity and loose specific gravity can be obtained by controlling technological parameters.
应用推荐