描述了田口方法在钼材料性能研究中的应用，并详细给出了材料研究中热等静压工艺参数的设计过程。
The application of Taguchi Methods in the study of molybdenum property is described. And the processes of HIP parameter design are given in detail.
中国是世界许多原材料的生产大国，其中包括镉、金、铟，铁矿、石灰、铅，锰、汞、钼、磷、盐、锡、钨、钒和锌。
It is the world's top producer of cadmium, gold, indium, iron ore, lime, lead, manganese, mercury, molybdenum, phosphate, salt, tin, tungsten, vanadium and zinc.
成功研制了中速磨磨辊新材料——锰钼复合高铬铸铁。
The new material for medium speed grinding roll-MnMo compound high chromium cast iron has been developed successfully.
用途：用于镧钨、镧钼阴极材料，三元催化剂，石油化工，汽灯纱罩添加剂，硬质合金，难溶金属等。
Uses: used Lanthanum tungsten, lanthanum molybdenum cathode materials, ternary catalysts, petrochemicals, gas lamps mantle additives, alloy, refractory metals.
本制粒工艺亦可推广到其它用细粉未（如钨、钼、钛、锆等）制取粉末冶金多孔过滤材料的生产中。
This granulation process can also be widely used for producing P/M porous materials by using other fine powders, such as w, Mo, Ti, Zr, etc.
三氧化钼因具有优良的光学特性而被广泛地用来研究制备光致、电致变色材料。
Molybdenum trioxide which has good light sensitivity is widely used in preparing the photochromic and electrochromic materials.
线切割是一种电加工机床，靠钼丝通过电腐蚀切割金属(特别是硬材料、行状复杂零件)。
An electric wire cutting machine tools, and molybdenum by electric wire through the cutting of metal corrosion (especially hard materials, the complex-shaped parts).
某小型航空发动机气缸盖由于有喷钼涂层，不同材料的同一平面磨削时难加工是制约该型号发动机性能的关键工艺。
Because of the different material with cylinder lid of one mini-aero engine, the hard machining process of grinding on the same plane is a key, which affects its performance.
钼单晶是一种广泛应用的重要的难熔金属材料。
Monocrystal molybdenum is a kind of widely used and important refractory metal.
目前实际应用的开关管多数工作在火花放电区域(巴邢曲线的右支)，使用的电极材料一般为钨、钼、不锈钢、水银、石墨等。
Most of the switch tubes used presently work in the gas spark region (the right branch of Paschen curve), and are made of graphite and mental such as tungsten, molybdenum, stainless steel and mercury.
综述了三氧化钼及其水合物在用作锂电池阴极材料、电化学显色材料和电催化材料方面的研究进展。
Recent progress in the research on molybdenum trioxide and its hydrates used as lithium cell cathodic materials, electrochromic materials and electrocatalytic materials is reviewed in this paper.
研究结果表明，稀土钼次级发射材料的阴极试样的最大次级发射系数达到2.45，满足了磁控管对阴极材料的次级发射系数2.0以上的应用要求。
The study showed that the maxim secondary emission coefficient of rare earth molybdenum cathode materials was 2.45, which meet the requirement (>2.0) of magnetron to the cathode materials.
在粗轧阶段选用了合金半钢材料轧辊，在精轧阶段选用了铬钼无限冷硬铸铁材料的轧辊。
In the process of rough rolling, the alloy semisteel was chosen, and the unlimited chrome and molybdenum chilled iron roll material was used in the process of fine rolling.
四螺纹口按国际标准化制造，材料选用38铬钼铝氮化钢，硬度高，使用寿命长。
4 , screw thread gob produced by internation standard , material is 38chrome molybdenum aluminium azote steel , high rigidity , long time.
试验研究三种钼基金属陶瓷材料在空气中的高温氧化行为及防护的可能性。
The high-temperature oxidation behavior and the possibility of protection for Mo-based ceramets in air were studied experimentally.
运用静态实验的方法，以尾矿玻璃熔体对碳化硅和二硅化钼耐火材料进行了侵蚀试验。
Static experiments on the corrosion of tailing glass melt to silicon carbide and silicon molybdenum refractories were made.
中硅钼蠕铁的抗热疲劳性能为普通蠕铁的3倍，因而是制造排气 歧管的理想材料。
The thermal properties of medium silicon-molybdenum vermicular iron are about three times of that of normal vermicular iron, so it is an ideal material for producing manifold.
一种泡沫镍钼钴三元合金材料的制造方法。
The invention discloses a method for manufacturing a foamed nickel, molybdenum and cobalt ternary alloy material.
评述了含钼的发光材料、仿金合金、热致收缩化合物、自润滑材料在我国的研究新进展。
Some new progress of research on molybdenum containing new material in China were reviewed.
本工作主要研究了钼薄膜标准材料的精密轧制工艺，制定了合理的轧制工作曲线，并进行了验证。
Precision rolling techniques of molybdenum film standard materials were described with reasonable working curve made and verified.
试验结果表明，使用该材料制作的牙板其使用寿命与高铬钼铸铁牙板相当，且生产成本低。
The result of industrial experiment had shown that jaw made of this material last equally with that of high Cr Mo cast iron, and this material is low_cost.
金属钼是正应变速率敏感性材料，即流变应力随着变形速率的增加而增大。
Molybdenum is strain rate sensitive material, that is, flow stress increases with increasing strain rate.
新型模具钢材料SKD61钢是一种含硅、铬、钼和钒的中合金热作模具钢。
The new-style of SKD61 steel is a medium alloy hot-mold steel.
炉体材料用不锈钢，加热体材料用钼丝。
The material of furnace is stainless steel and the heating body is molybdenum.
同时表明，钼酚醛复合材料的高温烧蚀性能良好，特别是在高热通量条件下，性能更佳。
The results also indicate, the ablative property of the Mo-phenolic resin composites at high temperature is superior, and is especially outstanding under the condition of high heat flux.
为了实现汽车车灯中钨、钼丝材料的连接，并使其满足高可靠性、耐热、耐疲劳性能优异等要求，采用了精密电阻点焊方法。
In order to obtain joints with high reliability, excellent performance of heat resistance and fatigue resistance, precise resistance spot welding is used to join Tungsten and Molybdenum wire.
在本实验条件下不发生点蚀的材料，其过渡层都是由于基体含钼而不出现贫铬现象。
The resistance to pitting of the materials containing Mo was thus bettered up because of the enhancement of repassivity of the transient layer.
根据用户要求可以制作成黑色、绿色、蓝色等颜色，还可添加石墨，二硫化钼等耐磨材料。
According to user requirements can be made into a black, green, blue and other colors, can add graphite, molybdenum disulfide, and other wear-resistant materials.
将多孔钴铬钼合金材料用于人工活性骨的骨架材料。
The porous Co-Cr-Mo alloy material are used as got-up active bones.
公司产品包括钼、钽、铌、钨、锆及其合金的丝、管、带、箔等稀有金属深加工材料。
Our products include wires, tubes, ribbons and foils of rare metals such as Mo, ta, Nb, w, Zr and their alloys.
应用推荐