使用超纯精钢锻制，使用寿命延长80%。
High Quality steel - Ultra clean steel to extend bearing life by up to 80%.
平均剑身长达三英尺，剑体焊接精良，整个剑的主梁与剑刃由尖端的冶炼工艺锤锻而成，钢与铁按照完美的比例整合一体。
Averaging about three feet, blades were pattern welded, a sophisticated technique by which twisted rods and strips of iron or steel were hammered together.
测试不锈钢在弯曲状态下的延展性及可锻性。
Tests used to assess the ductility and malleability of stainless steel subjected to bending.
介绍锻钢冷轧工作辊双频感应淬火设备特点，国内首创较低的中频频率的选定，与同类淬火设备比较的优点。
This paPer introduces the equipments of double-frequency induction heating the forged steel cold work roller, and compare with the same kind induction heating equipments.
曲轴表面及本体的缺陷，对发动机的可靠性有重要影响，对锻钢和球墨铸铁曲轴的探伤技术进行探讨。
Defects of crankshaft surface and body will produce important effect on engine reliability. This paper probes into flaw detection technology of forging steel and nodular cast iron of crankshaft.
就增高耐热与耐磨耗性能而言，在合金化设计上，烧结合金远比常规的锻钢与铸造合金灵活。
They have possessed high flexibility in their alloying design to increase their performance in heat and wear resistance in comparison with that of conventional wrought steel and cast alloys.
工业管道系统。锻制钢法兰和套圈。材料。机械性能。制造。试验。
Industrial pipeworks. Forged steel flanges and collars. Materials. Mechanical properties. Fabrication. Tests.
重量只有4 1 / 2磅，比任何其他的去盖器或切割机轻75%，结构为带有优质合金钢刀片的细锻钢，使用寿命长。
Only 4 1/2 lbs. , it's 75% lighter than any significant cutter. Constructed of fine forged steel with a quality alloy steel blade to last indefinitely.
本文从制造和使用两个方面对锻钢轧辊的质量控制进行了分析。
The manufacturing and being in use quality control of forging steel rolling mill rolls was analyzed in this paper.
在分析高速钢特性的基础上，介绍了高速钢的锻造工艺及其锻后热处理。
Upon characteristics analysis of high speed steel, forging technology of high speed steel and sequential heat treatment have been introduced.
公司承接各类不锈钢、锻铜、铸铜、贴金工艺、树脂、石材、砂岩等材质的雕塑制作及安装工程。
Sculpture manufacturing and field engineering in various materials of our company are as follows: stainless steel, forge copper, cast copper, gild, resin, stone and sandstone.
用图相分析方法测定并分析了由精锻机锻造高速钢的碳化物分布状态。
Picture analysis method is used to measure and analyze the carbide distribution in the high-speed steel shaped by radial forging machine.
综述了第13届国际锻冶师会议有关汽轮机转子钢的最新进展。
The Development of turbine rotors steel discussed in the 13th IFM is summed up.
高速钢的生产大多采用传统冶金方法，即铸锭—锻轧工艺。
Majority of the HSS is produced by the traditional metallurgy process, or ingot-casting and forging rolls.
显微组织的观察结果表明，MIM钢试样的碳化物的直径与形状比锻轧钢试样的均一。
The results of microstructure observation showed that diameter and shape of carbide of the MIM specimens were uniform than those of the wrought steel specimens.
结果表明，其耐磨性明显优于低合金球铁和锻钢。
The result showed that ADI has better wear resistance than low alloy cast iron and forging steel.
以铝合金—陶瓷镶块摇臂取代传统的锻钢摇臂，是发动机摇臂制造的最新技术。
Replacing the conventional forged steel rocker with aluminum die-cast rocker with a ceramic insert is an advanced technology of the manufacturing of internal combustion engines.
用于铸钢及锻钢上堆焊锻模、也可用于锻模的修复。
Fsurfacing welding the mold of forge in cast steel forging steel, also to repair the forge mold.
研究了加热温度、终锻温度、冷却速度对45V非调质钢力学性能的影响。
The influence of heating temperature, forging-ending temperature and cooling speed on the mechanical properties of untempered 45v steel is investigated.
研究了汽车转向节锻后余热淬火工艺对钢的组织和性能的影响。
The effect of thermomechanical treatment on the microstructure and properties of the automobile steering knuckle was researched in this paper.
锻钢止回阀阀瓣形式还分别有截流形，针形，球形您可以根据实际情况合理选用我们的阀门。
Forged steel check valve is respectively cut manifold, needle, ball you can according to the actual situation of reasonable selection of our valves.
精锻机锻造高碳铬轴承钢时存在网状碳化物不易破碎、锻件合格率低的问题。
While forging the high-carbon chromium bearing steel by the finish forge press, there still remains the issues that the carbide network can not be crushed with the low qualification rate.
鉴于冷镦钢的冷镦性能评价方法的单一性和不完善性，提出了锥锻方法，并从理论上证明了此种检验方法的可行性。
Aim at faultiness and oneness of the appraisal method of cold heading steel, this paper has proposed the cone forging method. It proves feasibility and gives the rudiment of the method.
根据不同需要，材质可选用铸铁、球墨铸铁、铸钢、锻钢、不锈钢、高温钢、合金钢等。
You can select casting iron, nodular cast iron, casting steel, forged steel, stainless steel, high-temperature steel, alloy steel, etc. for use according to your needs.
高温形变淬火显著改善烧结钢和粉末锻钢的延性和断裂韧性。
HTMT significantly improves the ductility and fracture toughness of sintered steel and powder forging steel.
利用热处理温度场的计算机模拟软件计算出大型锻钢支承辊锻件差温加热及冷却时的温度场。
The temperature field of a large forged back-up roll during differential heating and cooling was simulated with a computer based finite element method.
管路用钢法兰盘，锻制管接头，阀门和零件的通用要求规范。
Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications.
高温形变淬火是形变热处理的一种，它在烧结钢和粉末锻钢的生产中得到了应用。
High temperature thermomechanical treatment (HTMT) is a kind of TMT. It has been applied in the production of sintered steel and powder forging steel.
结果表明，感应电渣离心浇铸h 13钢毛坯制造的斜轧辊，其使用寿命不低于电渣重熔锻材制造的斜轧辊。
The application results show that the service life of slanting roller made of CIESC steel H13 blank is up to that made of ESR forged steel H13 blank.
用于铸钢及锻钢上堆焊锻模、也可用于锻模的修复。
For surfacing welding the mold of forge in cast steel and forging steel, also to repair the forge mold.
应用推荐