运输隔层使用戴孔的铝箔膜、钢膜或塑料膜。
The cladding can be made of perforated Aluminum Sheets, Steel Sheets or Clear Plastic Sheets.
不锈钢膜盒压力表可测量有一定腐蚀性的气体或液体的微小压力。
Stainless steel pressure gauges measurable film boxes have a certain corrosive gas or liquid tiny pressure.
它们发明了一种以精密卷绕对位技术在薄不锈钢膜上成型非晶硅太阳能电池的的制造方法。
It has developed a roll-to-roll manufacturing technique that forms thin-film amorphous silicon solar cells on thin sheets of stainless steel.
大型循环流化床锅炉高温再热器中所采用的不锈钢膜式壁管屏的制造工艺要点和难点，以及解决的工艺措施。
The article describes the critical and hard parts and technology measures of stainless steel membrane panel's manufacture, which be used in high temperature Reheater of large capacity CFB boiler.
能够抵挡这股压力的膜是用聚酯、聚砜和聚酰胺作的，并且固着在白色钢桶之内。
The membrane that can withstand such force is made of polyester, polysulfone and polyamide and is held within the white steel cylinders.
通过为不锈钢表面提供一个氧化环境的化学处理，钝化膜可以得到增强。
The passive film may be augmented by chemical treatments that provide an oxidizing environment for the stainless steel surface.
还有不锈钢内部的晶间腐蚀开裂，所有这些，对不锈钢板表面的钝化膜都发生破坏作用。
There are intergranular corrosion cracking in stainless steel, all of which have negative effects on the passive film on the surface of stainless steel plate.
该过程能去除不锈钢表面的有机物膜和微粒子残骸。
The process will remove organic films and particulate debris from the surface of the stainless steel.
研究了不锈钢去膜表面在氯化镁介质中的点腐蚀现象。
The pitting corrosion of the fresh stainless steel surface have been studied.
在铬镍不锈钢表面形成一个钝化的表面或膜是非常重要的，它可以将材料的抗腐蚀性提高到最大。
Establishing a passive surface or film on austenitic SS is essential to maximize the corrosion resistance that the metals offer.
本文概述了彩色不锈钢的应用前景和不锈钢着色原理，着色工艺方法及色膜的性能。
The application prospect of colored stainless steel, principle and the method of its surface—coloring are discussed.
为去除不锈钢表面的氧化物膜，研制了一种常温快速清洗的新型固体除锈剂。
A new solid agent for quickly pickling stainless steel oxide layers at room temperature was developed.
化学处理，例如重铬酸钠溶液，可以促进无氧化膜和杂质不锈钢表面的钝化膜更快速度的生成。
Chemical treatments, such as sodium dichromate solutions, may facilitate the more rapid formation of the passive film on a stainless steel surface already free of scale or foreign matter.
采用电阻加热式真空蒸镀法在玻璃、H 13钢、塑料和纯铜基体上镀制铝膜，并对其附着力进行了测试和分析。
Aluminum film is produced on glass, H13 steel, plastic and pure cu substrate by resistance heating vacuum evaporation, and the adhesive power of aluminum film is determined and analyzed.
用扫描电镜(SEM)分析了亚磷酸三苯酯在A3钢表面所成膜的微观形貌特征。
Micromorphology analysis by SEM is performed on the film of triphenyl phosphite formed on A3 steel.
探索用电化学方法在不锈钢阳极上，从酸性苯胺溶液中合成致密的导电聚苯胺膜的条件。
The conditions for polymerizing compact and conductive polyaniline films were explored by electrochemical methods on a stainless steel anode in acidic aqueous solution.
采用化学着色法在不锈钢表面获得蓝色和金黄色化学转化膜。
The blue and yellow stainless steel colored film are obtained by chemical coloring.
对采用化学着色法在溶液中不锈钢氧化色膜的生成速度、颜色转换控制、膜层的结构及其抗蚀性能进行了试验研究。
The Color film was made on stainless steel through chemical coloring, and the formation rate, color conversion controlling and corrosion resistance of color film were also studied.
采用不同规格的不锈钢网和尼龙网加工的微网组件与生物反应器一起构成动态膜生物反应器。
The dynamic membrane bioreactor is characterized by using micro-mesh made of nylon and stainless steel as media of bio-film.
随着极化电位向阳极区移动，不锈钢电极发生阳极氧化，形成了氧化铀沉积膜。
The film formed on the stainless steel electrode under the potentiodynamic polarization with increasing sweep potential.
采用电化学的方法在合金结构钢表面形成一层黑色氧化膜。
Black oxide film was prepared on alloy structural steel by electrochemical method.
应用原子力显微镜（AFM）研究硫酸盐还原菌（SRB）、微生物膜、腐蚀产物膜和A3钢腐蚀后的表面形貌，获得了高分辨率、清晰的图像。
The morphology of sulfate-reducing bacteria(SRB), microbial biofilms, corrosion product film and corroded A3 steel have been observed by atomic force microscopy(AFM).
所得到的不锈钢着色膜光亮美观，呈金黄色，具有优良的耐蚀性、耐磨性和良好的附着力。
The obtained stainless steel colored film is bright and beautiful, assuming the golden color, which has excellent corrosion resistance, wear resistance and good adhesive power.
本文主要论述基板负偏压与A 3钢基体磁控溅射离子镀铝膜相组成的关系。
This paper mainly deals with the relationship between negative bias of substrate and component phases of magnetron-sputtering ion plated aluminium film of A3 steel.
不锈钢表面钝化膜影响苯胺聚合的起始电位。
Original polymerization potential of aniline had related with the passive film of stainless steel.
利用高温高压釜设备辅以失重法、采用扫描电子显微镜（SEM）和X射线衍射（XRD）技术，研究了在动静两种状态下CO2分压对P110钢腐蚀产物膜的影响。
Influence of CO2 partial pressure on corrosion scale of P110 steel in stimulated oil field environments was investigated by using scanning electron microscopy(SEM) and x-ray diffraction(XRD).
铬镍不锈钢系统建立后，焊接处理会破坏存在的钝化膜，并降低材料抗腐蚀的性能。
When SS systems are fabricated, the welding process destroys the existing passive film and compromises the metal's ability to ward off the corrosive process.
钢杆，玻纤伞骨，彩晶柄手柄，花尼伞面，透明膜包装，晴雨兼用。
Steel pole, fibreglass ribs, colorful crystal handle, colorful nylon cloth cover, translucent plastic film packing, both for rainy and sunny use.
对比分析了高速钢与高铬铁轧辊在热凸度、摩擦系数、氧化膜特征、抗事故性等方面的区别；
Some differences between the rolls of high-speed steel and high-chrome iron in hot crown, friction coellieient, characteristics of oxidative film and anti-accident and so on are analyzed.
对比分析了高速钢与高铬铁轧辊在热凸度、摩擦系数、氧化膜特征、抗事故性等方面的区别；
Some differences between the rolls of high-speed steel and high-chrome iron in hot crown, friction coellieient, characteristics of oxidative film and anti-accident and so on are analyzed.
应用推荐