该舱区采用了4130铬钼（铬钼）焊接钢管架顶部大会。
The cabin area utilizes a 4130 chrome-moly (chromium-molybdenum) welded steel tube frame top assembly.
主要介绍现浇梁脚手架施工，支架验算及要求通车情况下钢管架空贝雷架受力验算。
The construction of cast-in-situ beam scaffolds and supporting bracket calculation are introduced in this paper.
建筑模板工程施工中，特别是高大支模架体施工中，往往出现扣件式钢管架体顶部可调顶托的悬臂长度过长，导致架体坍塌事故。
During construction of high formwork support frame, collapse accident usually occurs because of cantilever length of adjustable jacking of steel tubular scaffold with couplers.
扶手架及站脚：采用优质钢板、钢管冲压焊接成型，并经打磨、除锈、磷化、静电喷粉、高温烤焗等工艺处理。
Handrail frame and Station foot: high quality steel plate, steel stamping and welding molding and polished, rust phosphating, electrostatic powder coating, high temperature baking and other process.
断绳安全装置滑道加油时，油不得流入制动瓦和导轨架无缝钢管之间。
When adding oil to the rope-break safety instrument, the oil shouldn't flow to the brake and seamless steel pipe.
因此，高层建筑结构施工中，分段悬挑搭设的扣件式钢管脚手架应用得非常普遍。
Therefore, high building structure construction, segmentation cantilever of the fastener type steel tube scaffold built very common application.
吊杆架由无缝钢管焊接而成，手摇起重机和吊杆架一起固定在吊笼上。
The suspension framework was welded by the seamless steel pipe, the hand crane and suspension framework are fixed on the suspension coop.
本文对扣件式钢管脚手架杆件接头型式问题，从承载能力，受荷变形方面进行了试验和分析。
This article discusses the joint-types of buckle-type steel tubular scaffold, and analyzes the experiments with load-bearing capacity and load deformation.
济南遮阳蓬施工现场内的龙门架、井字架等巨大设备及钢管脚手架，若没有防雷设备应设备防雷设备。
Longmen, frame, derrick and huge equipment and steel scaffolding Ji 'nan awning in the construction site, if there is no lightning protection equipment equipment lightning protection equipment.
附墙架每组由三根通过正反丝杆可调节长度的钢管以及连接板组成。
Each group of framework adhering to wall is composed by the adjustable steel pipe and connecting plate.
该装置由温度控制仪、热电偶、加热圈、固定架、钢管几部分组成。
Experimental equipment is made up of temperature controller, electric thermo-couple, heating ring, fixed mount, steel pipe.
制止使用龙门架、钢管脚手架架起电线线路。
How to stop the use of Longmen set up the electrical wiring frame, steel pipe scaffold.
本文同时也对扣件式钢管脚手架极限承载力的进一步研究进行了展望。
This paper also makes the prospect of further research on the ultimate bearing capacity of steel tubular scaffold.
在建立新型钢管脚手架扣件的有限元分析模型的基础上，对扣件各部件之间的连接以及斜楔的预紧力问题进行了处理。
Based on the finite element analysis (FEA) model of steel tube scaffold couplers, the corresponding connection of scaffold couplers and pre-load of slide wedge have been discussed.
一阵阵震耳欲聋的声响冲击着观众的耳膜，声音来源于脚手架支撑的钢管，其中的封闭铁球不停地沿着展厅四周盘旋滚动。
Waves of deafening sound come from a steel pipe spiraling over the scaffolding, within which a set of invisible iron balls circulate endlessly around the exhibition space.
在该部位顶板模板施工中成功应用了碗扣式钢管脚手架支撑体系，整个施工过程中未出现任何安全及质量事故。
Cuplock scaffold bracing system was successfully used in those locations, and no any safety or quality accident took place in the whole process of construction.
网架安装采用空中散拼的施工方法，采用钢管脚手架临时支撑体系。
The construction method of air assembling separately for grid installation is adopted, the same as temporary support system of steel scaffold.
三角形钢管塔架是小型塔架的优选结构型式，但存在易产生风载扭振的缺点。
Triangular steel pipe tower is fine type of small scale tower structure. Yet it tends to cause a torsional vibration by wind.
结合工程实例。介绍了大跨度钢管悬挑脚手架的设计与施工。
Based on the project example, the design and construction of large-span steel pipe overhanging scaffold are introduced in this paper.
对高层建筑多采用扣件式钢管脚手架。
With fastener type steel tube scaffold in high-rise building.
椅脚：钢脚，采优质圆形实芯钢管与椅架一体折弯成型后经高温静电粉末喷塑制作而成；
Chair Legs:Sled-Base Chair with Solid Steel Rod Legs in Powder Coating Integrated into Steel Frame;
本文主要介绍扣件式钢管脚手架和碗扣式钢管脚手架在桥梁施工中的一些实际应用。
This paper introduces the actual application of two kinds of steel - tube scaffolds to bridge construction, i. e. clip - holding steel - tube scaffold and bowl - holding steel - tube scaffold.
它主要由蔬菜钢管塑料大棚、XPS聚苯乙烯挤塑板、地面煤渣保温层、反光膜、专利栽培架等组合而成。
The structure consists of steel pipes normally used for green houses, XPS board, cinder as floor insulation, reflective film and patented shelves for cultivation.
卸载拉杆及拉结筋均拉设在脚手架横竖钢管结点处。
Both the loading pole and lacing bar are set on the joints of the horizontal and vertical steel pipes.
通过对扣件式钢管支模架体系设计与施工中几个问题的讨论，以及模板支撑架的计算与立杆长度取值，提出模板工程设计与施工应注意的问题和对规范相关条文的修改建议。
This article discusses several issues in the design and construction of fastener-type steel-tube die support system, the calculation of die support and the determination of vertical pole's length.
钢管脚手架是常用的房屋建筑设备，在桥梁施工中也逐渐予以采用。
Steel - tube scaffold is a conventional housing construction equipment. It has been used in bridge construction gradually.
使用操作平台装置的直接费较钢管脚手架降低率为81.9%，并且随着建筑高度的增加，造价差异趋向扩大。
The direct fee caused by platform can be reduced 81.9% to that of steel scaffold. The difference will expands along with the increase of height of high-rise buildings.
加强型的钢管与可调节的底脚设计使衣帽架更加牢固可靠；
Reinforced steel pipe and adjustable bottom feet make coat hat rack firm and reliable.
不锈钢管弯曲椅架，表面镜面抛光，完美圆角弯曲。2、特制加厚皮革坐垫。
Fully welded tubular steel frame with mirror finish, Full round bends. 2, heavy reinforce saddle leather.
本发明涉及一种钢管相贯线切割机钢管支承架结构，特征是：支承轮安 装于支承板上；
The invention relates to a steel tube supporting frame structure of a steel tube intersection line cutting machine, which is characterized in that: a support roller is mounted on a support plate;
应用推荐