锚杆主体属于钢构件,极易遭受侵蚀。
Anchor system, which is mainly made of steel elements, is readily subjected to corroding.
本发明公开一种定位器及钢构件的定位方法。
The invention discloses a positioner and a method for positioning a steel member.
对轴心受压钢构件进行了稳定性检测方法研究。
It is mainly studied the testing methods of stability of axial compression steel members.
如按钢构件进行防火保护,则会造成资源浪费。
Therefore, if their fireproofing coating designed according to steel members, it must be a waste of resources.
高架起重机和钢构件的生产占公司销售额的70%;
Manufacturing of overhead crane systems and structural steel components account for 70% of sales;
展馆屋顶是由标准钢构件和可循环预制混凝土单元构成。
The roof is formed from standard steel sections and recyclable pre-cast concrete units.
本文作者结合工程实践详细介绍了钢构件制作的施工方案和保证措施。
The author in detail introduces construction schemes and guarantee measurement of steel structure 's facture combining with engineering practice.
给出了轴心受压钢构件和受压钢件和受弯钢构件可靠性评估的公式和图表。
The reliability estimation of steel columns axially loaded compression members) and bended members are discussed by minimization method.
残余应力虽然是自相平衡的,但对钢构件在外力作用下的性能还是有一定影响。
Although the residual stress is self-balanced, but for steel members under the performance of the external force or have a certain influence.
钢构件安装精度控制、筋绑扎及混凝土浇筑是钢骨混凝土结构质量保证的关键。
And steel member placement, steel bar tying, concrete casting is critical to the quality of steel skeleton concrete structure.
钢构件安装精度控制、钢筋绑扎及混凝土浇筑是钢骨混凝土结构质量保证的关键。
And steel member placement, steel bar tying, concrete casting is critical to the quality of steel skeleton concrete structure.
结果表明:由于混凝土的吸热作用,钢梁的温度明显低于无混凝土时的裸钢构件;
Results showed that, due to the heat absorbed by the concrete, the temperature field was lower than that of unprotected steel structure;
钢管混凝土受弯构件的滞回曲线和不发生局部失稳的钢构件相同,具有良好的抗震性能。
It is verified that the m - hysteresis loops of CFST bending members are similarly with that for steel members without local buckling. It has good aseismic behaviors.
利用连接构件之间约束作用,钢构件的稳定临界荷载可以得到显著的提高,节约大量的钢材。
If these elastic restraints action of buckling resistance is taken into account the critical loads of steel members may apparentely been increased and plenty of steel material is saved.
其特征是在组合钢板构件连接部位或加强部位,用胶层将另一块所需的钢板胶接在钢构件上。
It is characterized in that another steel board is glue connected on the steel component at the location of the built-up steel board connecting location or the enforcing location.
文章就钢构件中的残余应力对钢构件的静力强度、稳定性及疲劳性能的影响进行了分析和研究。
This paper analyses and studies the effect of residual stresses on static strength, stability, and fatigue strength of the steel members.
本发明的防污不锈钢构件的特征在于,在浮雕花纹加工后的不锈钢基材的表面上涂敷有疏水性皮膜。
The antifouling stainless steel member of the invention is characterized in that a water-repellent film is coated on the surface of a stainless steel substrate subjected to emboss processing.
用此材料包覆钢构件的防火保护方法具有防火涂料无法比拟的优点,是一种理想的钢结构耐火保护方式。
This fire protection method by using the material to envelope steel members has an unparalleled advantage over the fireproof paint and is a kind of ideal fireproof protection of steel structures.
基于薄板的弹性稳定理论,确定了在纯弯状态下空腹受弯钢构件孔口上方腹板和孔间腹板的最大高厚比。
Based on elastic stability theory of thin plate, the maximum high-depth ratio of these two kinds of web under bending is deduced.
详细介绍了螺栓孔打眼、钢构件工厂制作和现场安装、体外束的制作和安装以及体外束的张拉等施工工艺。
Some construction technologies were introduced in detail such as making of bolts hole, manufacture and installation of steel members, making, installation and tension of external strand.
采用有限元方法分析由于防火涂料局部破损而造成的火灾下钢构件内的三维热传导问题,给出构件内温度的分布规律。
The Finite Element Approach is used to analyze the temperature distribution of steel members covered by fire insulation subjected to fire.
又因为构成生产制造过程的基础单元是生产工序,所以本文以钢构件加工工序为研究对象,就工序质量控制进行探讨。
Constitute the basis of cell manufacturing process is the production process, so in the course of a century of quality management process, quality control has been through it.
举例说明:建造车间实施过的一个项目。 一组人员正在喷涂3*3英寸(7.5*7.5cm)的焊接的钢构件。
On a project in a fabrication shop, for instance, a crew was painting steelcomponents fabricated from 3-inch by 3-inch (7.5-cm by 7.5-cm) angle iron.
建筑师Daniel Patzold说,“市场棚亭使用了大量的碳钢构件,它们和不锈钢不一样,它们很容易生锈,所以必须有保护措施。”
"Market booths use a lot of mild steel sections, and mild steel tends to rust, unlike stainless steel, so it needs protection," says architect Daniel Patzold.
探讨了碳纤维布的粘接长度、层数、宽度比以及粘贴工艺等不同粘接参数对复合构件粘接性能的影响,初步描述了碳纤维布与钢构件的粘接机理。
Based on experimental data, adhesive length, the number of layers and sticking technology, and the effects of the parameters are discussed, and the bond mechanism is described.
对某在用市政钢箱梁桥的动力特性、焊缝缺陷、应力和变形、钢构件截面尺寸和锈蚀情况进行了检测,按规范要求验算了结构的整体稳定和局部稳定。
It was examined that the dynamic peculiarity, the welding line flaw, the size of steel member section and the rusty phenomenon of an existing municipal steel-box girder bridge.
对“PU-1”钢和焊缝合金断裂行为的研究结果表明,“PU-1”钻材钢抗H2S应力腐蚀性能和焊接性能较好,应用于结构钢构件具有显著的经济和社会效益。
The results show: drill steel type "PU-1" has good H2S stress corrosion resistant and weldability, which can be used for structures with high economical profit and society significance.
钢-混凝土组合梁是指钢梁和混凝土板通过剪力连接件连接形成整体共同工作的受弯构件。
Steel-concrete composite beam is a kind of flexural member composed by concrete slab and steel beam via shear connectors.
该项目所使用的材料是经济的白色砌砖、黑钢和连接它们的木条构件之间的并置结构。
The project's materials are a juxtaposition between the economical brickwork, 'bagged' and painted white, and the dark steel and battened timber elements that link them.
该项目所使用的材料是经济的白色砌砖、黑钢和连接它们的木条构件之间的并置结构。
The project's materials are a juxtaposition between the economical brickwork, 'bagged' and painted white, and the dark steel and battened timber elements that link them.
应用推荐