动力端：壳体为钢板焊接结构，焊后消除内应力。
The power end :The frame is welded steel-plate construction. It is stress-relieved after welding.
顶盖为Q 235钢板焊接结构，具有足够的刚强度。
Head cover is of a welded structure of the Q235 steel plate with sufficient strength.
本机床采用液压传动，机架为钢板焊接结构，有足够刚性和强度。
The machine is hydraulically driven and structure with steel welded plate. This structure has enough ridged.
也有某些简易箱体为了缩短毛坯制造的周期而采用钢板焊接结构的。
There are some simple box blank in order to shorten the cycle manufactured using welded steel structure.
采用钢板焊接结构，液压传动，蓄能器回程，操作方便，性能可靠，外形美观。
The machine employs hydraulically-driven swing beam, the steel plate welded structure, and accumulator -based pullback cylinder with steady and reliable operation.
全钢板焊接结构，综合处理(振动时效、热处理)消除内应力，有很好的刚性与稳定性。
All steel welded structure, vibrating treatment of ageing for removal of internal stress, with good rigidity and stability.
液压剪板机采用钢板焊接结构，机身采用有限元分析设计、振动时效消除内应力，使机身稳定、可靠。
This machine adopts steel plate welding structure, the fuselage using the finite element analysis and design, Vibratory stress Relief of internal stress, so that body stable and reliable.
艏部是钢板焊接球鼻形结构。
The stem is of bulbous bow type constructed by welded of steel plates.
机器构架采用钢板整体焊接结构，坚固耐用。
The machine skeleton uses the steel plate overall welding structure, firm is durable.
车架：车架采用16Mn车用钢板制成的焊接式纵梁和整体贯穿式横梁组焊而成的空间框架结构。
Frame: the frame is made into a space frame structure, including the welded longitudinal beam and the whole pulling-through crossbeam, of which are made of 16mn vehicle steel.
随钢结构建筑的迅猛发展，对建筑用钢板的强韧度、屈强比、焊接性等提出了更高的要求。
With the rapid development of steel framed buildings, the steel plates for buildings must possess higher performances of strength, toughness, yield ratio and weldability, etc.
本阀门为钢板焊接，结构短，重量轻，结构简单，使用维修方便，为非密封型阀门。
The valve is plate welding, structural short, light weight, simple structure and easy to maintain and use, it's a non-sealed type valve.
YKK系列高压三相异步电动机造型采用钢板焊接成箱式结构，重量轻，刚度好；
YKK Series high voltage(6kV or 10kV) induction motors has the box-type construction, which was made up of steel plate welded with each other, lightweight and good stiffness.
激光拼焊技术是将两块或多块具有相同或不同机械性能、不同表面状态的钢板使用激光焊接的方法连接成毛坯件，然后进行整体冲压成轿车结构件。
Tailor welded blanks are defined as two or more sheets of blanks with equal or different mechanical properties, or surface coatings welded together by laser before stamping.
我们可制造结构用钢板、焊接结构用钢板、建筑结构用钢板、机械结构用钢板、以及塑胶模具用钢板。
We could produce plate for structural use, Welded structural use, Building use, Machine structural use and plastic die mold use.
底板是以槽钢焊接成框架，钢板为面板的平板结构，其尺寸与模框相对应。
Channel bottom is welded into the frame, steel structure for the flat panel, and its size corresponds with the mold box.
全钢板焊接框架结构，振动时效消除内应力，机械强度高，刚性好。
The machine is all made from steel. It's vibration treated roil to reduce internal stress to make machine stronger.
本系列产品适用于一般结构钢和工程用热轧钢板、钢带、可供焊接、铆接、栓结构件用。
This series of product is applicable for general structure steel and engineering used hot-rolled plates and steel strips to weld. rivet and bolt structures.
系列枪式点焊机广泛应用于大型网板和大型钢板结构件的成形点焊，可焊接低碳钢、不锈钢、铜、铝等金属圆材及板材。
QDN series gun-spot welder is widely used in the complete welding of the structures of large halftone and large steel plate.
其结构床身采用钢板焊接。
其结构特点是：机座采用钢板压形焊接机座，滚动抱轴承结构；
Frame is a press-formed welded fabrication and hugging bearing structure;
其结构特点是：机座采用钢板压形焊接机座，滚动抱轴承结构；
Frame is a press-formed welded fabrication and hugging bearing structure;
应用推荐