介绍一种钢包精炼炉智能控制系统。
An intelligent ladle furnace (ILF) control system is presented.
大型钢包和精炼钢包的包壁和包底。
这些棒通常使用不锈钢包壳。
奥氏体不锈钢包括包装板通常使用冷成型。
Austenitic stainless steel including clad plate shall generally be subjected to cold forming.
本文介绍喂线法钢包处理技术的工业试验情况。
The industrial tests of ladle wire feeding technology are reported in this paper.
典型的结构型钢包括工字钢、钢、钢和丁字钢。
Typical structural steel shapes include beams, channels, angles and tees.
概述了钢包烘烤的意义，钢包烘烤装置的进展。
The paper overviews the significance of ladle heating and development of ladle heating units.
生产的不烧砖在平炉钢包渣线上使用，取得了较好效果。
The brick gained favorable application result in the ladle slag line.
研究了钢包在各个周转阶段的包衬温度分布及其变化规律。
The temperature distribution and its changing rule of ladle lining at each turnover stage were studied.
介绍了用低碳合成渣在钢包中深脱氧和深脱硫的工艺试验。
This paper introduces the experiments of deep deoxidization and desulphurization in ladle with carbonaceous synthetic slag.
本文以钢包复合结构体为研究对象，主要进行了以下的研究。
This paper mainly does the following researches with the object of ladle composite construction body.
介绍一种套筒式煤气烧嘴烘烤装置及其在钢包烘烤中的成功应用。
The ladle drying device with a sleeve type gas burner and its application in the ladle drying is introduced.
大楼侧面原本采用不锈钢包边，经久耐用，经过清洁后仍然崭新。
Due to the durability of the original material, the stainless steel cladding on the sides of the building was cleaned and retained.
本论文主要介绍了连铸钢包到中间包的下渣检测方法的研究工作。
The dissertation mainly introduces the research and development work of Ladle-Tundish slag detection.
对某钢包回转台基础进行结构分析和稳态导热理论的结构高温分析。
The structural analysis and the high-temperature analysis of the ladle turret foundation with the heat conduct methods were developed.
本文运用有限单元法，对钢包底的温度场和应力场进行了数值模拟。
In this paper, temperature and stress field on the bottom had been simulated using finite element method.
耐候钢包裹着小屋的基础，而较高的外墙覆盖着厚厚的雪松板与青铜条。
Weathering steel wraps the base of the cottage, while higher up the exterior walls are clad in thick cedar boards affixed to bronze bars.
得出只有在钢包炉底吹过程中吹入氮气，才能使钢水的含氮量异常增高。
The result shows only to blow nitrogen into the ladle from the bottom, the nitrogen content of the steel increases.
钢包精炼炉的泡沫渣精炼工艺是提高热效率、降低生产成本的有效手段。
The technology of foaming slag refining is a effective method to improve heating efficiency and reduce the cost.
钢包是冶金生产中的重要设备，其使用寿命的长短对企业生产有直接影响。
Ladle is the important equipment in steel industry and its lifetime directly influences the normal production of entire enterprise.
根据试验结果和钢包化学加热法的特点对硅系合金作非铝发热剂进行了评价。
Evaluation on silicon alloy as non aluminothermic was carried out according to the experimental results and the characteristics of chemical heating.
因此，拱顶从内到外都用不锈钢包裹着，除湿空气将被灌入钢桁架，以防生锈。
So inside and out, the arch is covered in stainless steel, and dehumidified air will be circulated around the structure's steel trusses to prevent rust.
介绍了连铸机钢水包承载用新型设备钢包车的功能、主要技术参数及结构特点。
Here is an introduction to the function, main technical parameters and structure features of ladle cara new carrier for caster ladle.
针对传统钢包喷粉工艺的不足，开发了从钢包底部喷吹的喷粉型狭缝式透气砖。
Considering deficiencies of traditional powder injection in ladle, slot plug with conical fluidized bed used for bottom powder injection in ladles was developed.
本文对影响钢包滑动水口漏钢的各种因素进行了分析，并制定了相应的改进措施。
This paper analyzes the factors which influence the breakout of the ladle slide gate, and draws the relevant improvement measures.
通过冶炼工艺，采用钢包吹氩等措施，改善了钢的质量，满足了钢材的性能要求。
Through degassing by argon injection into ladle, however, We have improved the quality of steel and satisfied the performance needs of steel products.
为了改善钢包覆盖剂的保温性能，研制出了采用炭化稻壳为主原料的新型钢包覆盖剂。
In order to improve the insulation performance of the ladle covering flux a new type carbide rice husk based ladle covering flux has been developed.
对钢包内吹气增氮和合金化增氮进行比较，认为钢包吹氮是一种比较经济、可取的方式。
Compared blowing nitriding to ladle with alloying nitriding, the blowing nitrogen to ladle is thought to be a economic and advisable method.
试验结果表明采用钢包注流保护浇注技术可降低二次氧化，提高铸坯内在和表面的质量。
The experiment shows that adopting protective casting technology can reduce reoxidation and improve the internal and surface quality of block.
试验结果表明采用钢包注流保护浇注技术可降低二次氧化，提高铸坯内在和表面的质量。
The experiment shows that adopting protective casting technology can reduce reoxidation and improve the internal and surface quality of block.
应用推荐