利用穿隧式电子显微镜观察碳化钛析出物在。含钛钢中之微结构。
The microstructure of titanium carbides of. Ti-bearing steel has been investigated using...
外套材质有：钢质（非UL认证），304和316不锈钢，钛钢，锆钢，铌钢和钽钢。
Sheath materials available are: steel(not UL listed), 304 & 316 stainless, titanium, zirconium, niobium and tantalum.
显微组织分析表明，含钛钢中生成了钛化物相，并且随着退火温度的提高，钛化物析出量增多。
Analysis on the microstructure shows that precipitation of compound containing titanium was found in the steel, and its amount increases with the elevation of annealing temperature.
通过分析TA2和Q 235b的焊接性，论述了钛与钢熔焊焊缝脆裂的机理，指出钛钢复合板焊接性能差的主要原因在于焊缝中产生了脆性的金属间化合物，从而导致焊缝在焊接应力的作用下发生开裂。
The results indicate that the brittle intermetallic compound in weld is the main reason why the weldability of the plate is bad, which leads to cracks under the effect of welding stress.
手套还能用尼龙，不锈钢，或钛打印出。
为了操作容易，该金属呈固体小块形式并置于由抗腐蚀金属（如钛或不锈钢）制成的惰性金属筐内。
For ease of operation, the metal is in the form of nuggets and placed in an inert metal basket made out non-corroding metal (such as titanium or stainless steel).
喷射泵可由各种各样的材料制成，例如铸铁、钢、不锈钢、哈氏合金、钛、搪瓷、玻璃、塑料和石墨，并可制成各种尺寸。
Jet pump may be all kinds of material, such as cast iron, steel, stainless steel, Hastelloy, titanium, ceramic, glass, plastics and graphite, and made of various sizes.
钢钛材、蒙乃尔等并可根据客户特殊要求冶炼和制造。
Titanium Steel, Monel, and other special requirements and according to the customer smelting and manufacturing.
阀杆应该是以镀镉钢合金或316不锈钢作为标准配置。备选的阀杆材料可以根据要求提供，例如，钛，不锈钢，等等。
The shaft shall be cadmium-plated steel alloy or 316 stainless steel as standard equipment. Optional shaft materials shall be available on request, i. e. , titanium, stainless steel, etc.
钛有着钢的强度，但重量仅是其的一半，因此它适合用于制造飞行器。
Titanium has the strength of steel but weighs only half as much, hence its advantage for use in aircraft.
简体中文标题：焊接。钢、镍、钛和其合金的熔焊接头(束焊除外)。缺陷的质量等级。
English Name: welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections.
对CSP生产的低碳微钛高强度钢进行了化学相分析和高分辨率透射电镜的观察。
Using chemical phase analysis and high resolution TEM analysis, HSLC steel with microalloyed Ti produced by CSP was studied.
本文研究了微量元素钒、钛在非调质钢中的析出硬化作用和细化晶粒作用。
The precipitation hardening effect and the grain refining effect of trace elements vanadium and titanium in microalloyed steels were researched on.
分析了钢中碳、锰、铌、钒和钛等元素对管线钢组织和性能的影响，以及硫、磷、氧等杂质元素对钢的性能影响。
The effect of carbon, manganese, vanadium and titanium on the microstructure and properties, as well as the effect of sulfur, phosphorus and oxygen on properties were investigated.
总结了钛在低合金高强钢中的析出行为，包括析出物的种类、形态、尺寸及析出动力学；
The precipitation behaviors of titanium in high strength low alloy steel(HSLA steel) were summarized including the type, morphology, size and precipitation kinetics of the precipitates.
结果表明：用冶炼高钛渣的副产半钢生产球墨铸管在工艺上是可行的。
As a result, it is feasible that making of ductile iron pipe use of semi-steel.
概述了钛微合金化在低合金高强钢中的工业应用进展、难点及可能的研究方向。
The developments of industrial application in HSLA steel, difficulty and potential research directions of titanium micro alloying were also analyzed.
进行了高温烧结法在钢基体的表面上制备钛铁合金涂层的新工艺研究。
A new technology for preparation of Ti-Fe alloy coating on the steel substrate was investigated by high temperature sintering method.
对于高温碱液多采用钛及钛合金或者高合金不锈钢。
Lye for the use of high-temperature titanium and titanium alloy or high alloy stainless steel.
在新的配矿条件下，研究了碱度对承钢钒钛磁铁烧结矿的强度、矿物结构和烧结过程的影响。
The influence of sinter basicity on quality, mineral structure and sintering process of vanadium-titanium magnetite was determined under the new raw material structure.
对微钒钛高抗震性能建筑结构钢进行了模拟地震载荷高应变低周疲劳试验。
The high strain low cycle fatigue properties of V ti micro alloyed high anti seismic structural steel were studied with simulated earthquake loading.
抗阻尼性能强：金属钛受到机械振动、电振动后，与钢、铜金属相比，其自身振动衰减时间最长。
Strong antidumping property: When titanium is affected by mechanical vibration or electric oscillation, its vibration damping time lasts the longest time, compared to that of steel and copper.
目的研究两种临床常用的根管预备器械不锈钢锉和镍钛锉预备根管对充填后根管根尖孔封闭性的影响。
Objective To evaluate the apical sealing ability of obturated root canals prepared hand ProTaper with stainless steel K files in simulated resin root canals.
金属钛产品的主要生产厂有神户制钢、住友金属和新日铁公司。
And the major titanium product suppliers are Kobe Steel, Sumitomo Metal and NSC.
我公司经销各种规格，不锈钢8k板，磨砂板，钛金板，不锈钢管材，花管，矩管及配套材料，附件。
Our company deals in various specifications, stainless steel 8k plate, grinding plate, Titanium plate, stainless steel pipe, flower tubes, rectangular tubes and supporting materials, annex.
我公司经销各种规格，不锈钢8k板，磨砂板，钛金板，不锈钢管材，花管，矩管及配套材料，附件。
Our company deals in various specifications, stainless steel 8k plate, grinding plate, Titanium plate, stainless steel pipe, flower tubes, rectangular tubes and supporting materials, annex.
应用推荐