分析了液压系统现场故障发生的特点，针对该特点提出了采用快速诊断仪器。
The character of hydraulic system site malfunction was analyzed, and the application of fast analysis appliance was put forward.
文章首先介绍了流程工业CIMS故障诊断的特点及针对该特点设计的面向流程工业CIMS的故障诊断软件工具FDSK。
In this paper, a Fault Diagnosis Software Kit (FDSK), considering the requirements of CIMS in process industry, is introduced.
该产品是铺设地毯表面封边专用胶带，专门针对展览特点而生产，应场地不同而提供不同选择。
This product is specially for laying carpet, especially for exhibit feature. It has range of selections for varied space.
针对该设备负载大、运行情况复杂等特点，主轴采用了交流变频调速矢量控制技术，小车采用了先进的交流伺服控制技术。
Against the heavy equipment load and complex operations characteristic, the spindle used vector control technology of ac frequency speed control; the car used advanced ac servo control technology.
给出了一种针对传感器网络的安全加密协议，并对该协议的一些实现问题及其特点进行了分析。
A protocol of encryption for security in sensor networks is proposed, and some problems of realization and characteristics for this protocol are analyzed.
行李箱盖外板冲压拉延成形的工艺参数优化是一个多因素多目标问题，针对该问题的特点，采用本文的稳健优化设计方法。
The parameters optimization of the stamping drawing process of the outer panel of trunk lid is a multifactor and multiobjective problem. The robust optimal design was adopted for this characteristic.
针对每个阶段的不同特点和要求，分析了该阶段的费用构成，并采用相应的方法建立了各自的估算模型。
And then according to the different characteristics and requirements of each phase, it analyzes the cost composing of this phase and establishes the estimating model respectively.
针对该气田浮化液特性和生产工艺流程的特点，进行了低温高效破乳剂的筛选与现场试验。
The selection and field test of low temperature and high efficiency demulsifiers were conducted, according to property of emulsion and characteristics of process flow of the field.
文中针对精密剪切设备开发的特点，对该产品的并行工程集成框架、关键技术等问题进行了研究。
In the paper, according to the characteristic of accurate-shearing equipment, the integrated configuration and primary technique based-on CE on the product development were researched.
文章针对“电子商务与法律”课程的特点，探讨案例教学法在该课程中的应用。
This paper studies the features of this course and tries to probe into the application of case study in teaching.
分析了汽车仪表板按钮装饰盖的结构特点，针对该产品结构设计了双斜抽机构。
The structural processability of the press button decorative cap on an automotive header board was analyzed.
针对该微分方程的非线性特点，采用一阶谐波平衡法，进行了动力响应的计算分析。
The harmonic balance method(HBM)was employed to solve the forced response of damped blades considering nonlinear feature of differential equations.
针对该产品的使用条件和技术要求，阐述了配方设计特点和生产工艺要点。
The formula design and producing technology were stated according to use conditions and technology requirements of the product.
本文针对染料废水的特点，以提高废水的可生化性为切入点，探讨该废水处理的有效途径。
In this paper, to improve the biodegradation, the effective method of dye manufacturing wastewater treatment is discussed, which aims to the characteristics of dye manufacturing wastewater.
针对红外成像制导的特点，给出了该视觉模型在红外图像处理中的应用方案。
Aimed at the characters of the infrared imaging guidance, a application scheme in the infrared image process based on the vision model is given.
针对该工程的特点，考虑了单层网壳结构三种不同的施工方案，并对索杆体系张拉成形过程的施工方案也进行了分析。
Based on the characteristic of this project, three construction schemes were considered, and the process how the cable-strut system is hauled was also analyzed.
该密封是针对舰船用制冷压缩机的轴封特点和要求而设计的，但也可用于民用制冷机。
The seal developed based upon the characteristic and requirement of refrigeration compressor in ship, but it is applied to the others in general use.
本文针对合金瞬态凝固过程温度场的特点，详述了对该过程中合金液内温度场进行测试的方案。
This article put forward the detailed project of collecting the data of Alloys' Transient Solidification Temperature Field, according to the characteristics of this process.
本文针对该隧洞的特点依据保障隧道内乘驶机动车各人员健康、卫生和隧道的营运安全为原则对污染物浓度设计限值进行了研究。
This paper made some investigation about the permissible concentration limits about contaminations in roadway tunnel from the point of view of the effects on the body.
针对低电导印染废水难处理的特点，采用微电解法对该废水进行了实验研究。
In accordance with characteristics of difficult treatment of dyeing wastewater with low electrical conductance, experimental test of the said wastewater by micro electrolysis method is employed.
针对离合器外壳的结构特点，制定了该零件的成形工艺。
Regarding the characteristic structure of the clutch shell, the forming technology of the part is insured.
分析了车厢侧板零件通风窗冲压加工的工艺特点，设计了一副针对该零件加工的切口拉伸复合模。
Analyzed press technology characteristics of vent-windows of the car side board, designed a lancing-drawing compound die.
针对该零件的结构特点，制定该零件的加工工艺。
For the structural characteristics of the parts, the parts of the developing processing technology.
针对该结构的特点，着重分析和计算了转换层的中厚板和支承在中厚板上的剪力墙。
Aiming at this special structure, the medium thick plate used in transition storey and its supporting shear walls are analyzed.
介绍了神经网络实时监控数控加工技术产生的背景，详细分析了其特点和指导思想，并针对该研究领域目前存在的技术难题做了具体分析。
This paper introduces the background, features and key ideas of the NN real-time online control in NC process, and then analyzes the existing technical difficulty in this field.
该技术利用流态化燃烧的固有特点，避免了碱金属问题和针对多变秸秆燃料的适应性问题。
With the characteristic of fluidized burning, this technology avoids alkali metals problem and the adaptability problem of changeful straw fuel.
并针对该频率区与曳引机主机额定转速———主振频率接近的特点，提出了防止电梯发生系统共振的措施。
This frequency range is proximate to main vibration frequency of the traction machine at rated speed, and, according to this, measures against elevator resonance are proposed.
针对该磁悬浮系统的开环不稳定和强非线性的特点，采用极点配置自适应控制方法实现了对磁悬浮系统的数字控制。
The problem of opening loop instability and strong nonlinearity of magnetic floating systems are solved by applying pole assignment adaptive PID control technique.
针对泛型技术的特点，该文提出了一种增强的覆盖度量方法，该方法可用于泛型程序的白盒测试。
Aiming at generic technologys characters, this paper puts forward a kind of enhanced coverage metrics, which can be used in generic programs white-box test.
针对泛型技术的特点，该文提出了一种增强的覆盖度量方法，该方法可用于泛型程序的白盒测试。
Aiming at generic technologys characters, this paper puts forward a kind of enhanced coverage metrics, which can be used in generic programs white-box test.
应用推荐