飞机工程师们多年来探索使用轻质强化碳纤维塑料代替金属部件。
Aircraft engineers have for years sought to replace metal components with lightweight plastics reinforced with carbon fibres.
复合材料，比如以光纤玻璃和碳纤维合成的塑料树脂，已经在车辆、飞行器等产品制造中广泛代替金属。
Composites such as fibreglass and carbon fibre bonded in a plastic resin are already widely used to replace metal in making, for instance, cars and aircraft.
之所以Aptera这样的公司出现，就是因为新车型的设计已经很大程度上变成了计算机仿真技术的运用，而不只是依赖于金属(或者是碳纤维)。
One reason for the emergence of firms such as Aptera is that designing a new vehicle has become as much an exercise in software simulation as in metal (or even carbon-fibre) bashing.
碳纤维绳用建筑的绿色屋顶上的金属框架拉紧，然后沿着外立面以一定角度向下倾斜，固定在地面上。
The carbon fibre ropes are pulled taut over a metal frame on the building's green roof and then angled down over the facades to meet the ground.
本研究目的系利用金属银抗菌的特性，在嫘萦系活性碳纤维表面进行镀银改质。
This study examines the properties and microstructure of viscose rayon-based activated carbon fiber (ACF) adsorbent modified by supporting silver.
采用吸附仪测定了所制负载金属活性碳纤维的吸附等温线，然后用不同理论方法对孔径分布进行表征分析。
The pore distribution of metal coating activated carbon fibers were analyzed by HK, BJH and Dubinin theories from the nitrogen adsorption isotherms measured by auto adsorption meter.
加强纤维可以是金属、陶瓷、玻璃或是已变成石墨的被称为碳纤维的聚合物。
Reinforcing fibers can be made of metals, ceramics, glasses, or polymers that have been turned into graphite and known as carbon fibers.
然而，这一切是否都无所事事和档案，均衡器和有毒金属似乎有许多艰苦的工作，你一定都能选择的碳纤维螺旋桨。
However, if all this mucking about with files, balancers and toxic metals seems like a lot of hard work, you can always opt for carbon fibre propellers.
介绍了碳纤维复合材料天线采用转移法进行表面金属化的技术。
This paper describes the technology of the carbon fiber antenna metalizing by transfer.
比金属银、铜热导率(TC)还要高的中间相沥青基碳纤维倍受世人关注。
Mesophase pitch-based carbon fibers, which are of higher thermal conductivity (tc) than that of metals such as Ag and Cu, are noticeable in the world.
结论国产碳纤维桩的固位力大于临床常用铸造金属桩，能够满足临床要求。
Conclusion The retention strength of domestic carbon fiber is greater than that of chrome-nickel posts and can meet clinical requirements.
在通用公司的设计中，使用了可以完全粘结到热塑性阻挡层的碳纤维增强热塑性复合压力外壳来代替常规金属压力外壳。
In the GE design, the conventional metallic pressure armor is replaced with a carbon fiber reinforced thermoplastic composite pressure armor which is fully bonded to the thermoplastic barrier layer.
经过金属化的碳纤维已广泛应用于电磁屏蔽材料中。
Metalized carbon fibres are widely used in electromagnetic screen materials.
此纹理库中的材料包括：合成材料、木材、尼龙织物、 碳纤维玻璃、皮革、涂漆的表面、橡胶、玻璃 （结构和平原）、纸、拉丝金属和更多。
The materials in this texture library include:synthetics, wood, nylon fabric, carbon/fiberglas, leather, varnished surfaces, rubber, glass (structure and plain), paper, brushed metals and more.
碳纤维产品不像金属产品会出现明显的裂痕，但是有可能导致其它更严重的后果。
Carbon fiber will not dent like metal but will crack which may lead to failure.
主要研究了碳纤维复合材料转移法金属化载体膜的制备。
The preparation of the carrier film which is used on CFRP metalizing by transfer is studied in this paper.
它是用轻型塑料、碳纤维和钛金属元素制成的，重1公斤。
It has been constructed using lightweight plastic, carbon fibre and titanium and weighs about1 kilo.
本产品采用高碳石墨经化学处理，高温膨胀与玻璃纤维、金属丝、碳纤维等材料复合后经编织、整型而成。
The product is woven and carded from high carbon graphitetreated by chemical way and expanded in high temperature, glass fibre, metal silk, carbon fibre, etc.
从事与金属和碳纤维复合材料有关的工作。
Works with both metal and carbon fibre composite materials. Registration or licensing may be required.
加强件可由金属或碳纤维复合材料材料制成。
The reinforcing member may be made of metal or a carbon composite material.
采用液态金属渗透法把碳纤维与熔融锌和锌合金制成复合材料。
The composite has been prepared by the infiltration of carbon fibres with melting zinc and the zinc alloy.
该电力导线是以碳纤维作为发热材料与金属导电介质结合的防覆冰电力导线。
The power conducting wire is the ice-coating-proof power conducting wire which is obtained by combining the carbon fiber as a heating material with the metal conducting medium layer.
本文对金属基复合材料用增强碳纤维的涂层技术研究作了综述。
This paper summarizes the studies about carbon fibre coatings for fabrica_ ting metal-matrix-composites.
综述了中孔活性碳纤维的国内外研究进展，着重介绍了活化工艺法、金属催化法、非金属添加剂法等制备方法。
In this paper, research work on mesopore activated carbon fiber at home and abroad is reviewed. Methods of pore size control such as activating process, metal catalyst and nonmetal add...
从事与金属和碳纤维复合材料有关的工作。
但是铁磁性金属的引入降低了碳纤维本身的介电性能。
But the introducing of ferromagnetic depress the dielectric properties of carbon fibers.
本发明公开了一种碳纤维增强镍基复合材料及其制备方法，涉及金属基复合材料。
The present invention discloses one kind of carbon fiber reinforced Ni-base composite material and its preparation process, and relates to metal-base composite material.
本文介绍了金属基复合材料中常用增强物——碳纤维的结构及性能，特别总结讨论了碳纤维与常用金属的结合类型。
The paper deals with the structure and performance of carbon fibre used in MMCs and especially the reaction between it and some metals.
一种碳纤维与金属结合螺纹管式脚踏车架，车架是由数根支杆、衔接头及二通接头构成。
The utility model relates to a thread tube bicycle frame made of carbon fibers combined with metal, which is composed of a plurality of supporting rods, an engaging head, and a two-way joint.
一种碳纤维与金属结合螺纹管式脚踏车架，车架是由数根支杆、衔接头及二通接头构成。
The utility model relates to a thread tube bicycle frame made of carbon fibers combined with metal, which is composed of a plurality of supporting rods, an engaging head, and a two-way joint.
应用推荐