金属可分为纯金属与合金两类。
扼要阐述了金属材料晶界在纯金属与合金高温氧化中的作用。
This paper explains the role of metallic materials grain boundary in high temperature oxidation behaviour of pure metals and alloys in brief.
本文就近年来有关牙科金属与合金腐蚀的研究方法作一综述。
This article reviewed the current study methods on the corrosion of dental alloy.
稀土在金属与合金的高温氧化与硫化作用中具有明显的抗蚀特性。
It is obvious that rare earths can suppress the oxidation and sulfuration of metals and alloys at high temperatures.
正因为如此，金属与合金组织特征参数的测量和计算就必不可少了。
So it is necessary to measure and calculate the parameter of alloy metal.
微细切削技术是面向金属与合金等非硅材料微小型结构件精密加工需求的关键技术。
Micro-cutting technology is the key technology for the precision machining of microstructure which is usually made of non-silicon materials such as metal and alloy.
金相学，金属结构学以金属与合金结构为研究对象的学科，尤指用光学和电子显微镜使用。
The study of the structure of metals and alloys, especially by optical and electron microscopy and X-ray diffraction.
对于不同金属与合金小平面的方位与晶体点阵结构的相互关系，用滑移型和层错能进行描述。
A correlation of the orientation of facets for different metals and alloys with lattice structures, SFS and modes of slip was described.
金相学：研究金属与合金组织结构的学科，特别指采用显微镜和X射线衍射技术进行的这类研究。
Metallography: Study of the structure of metals and alloys, particularly using microscopic and X-ray diffraction techniques.
目前耶鲁大学的科学家们通过开发一种可塑如塑料的新型金属合金来打破强韧度与可塑性之间的此消彼长。
Now Yale scientists are doing away with this strength-moldability tradeoff by developing novel metal alloys that are as moldable as plastic.
顿巴黄铜铜与锌，有时还有其它金属的合金，用来制造廉价珠宝。
An alloy of copper with zinc and sometimes other metals, used in making inexpensive jewelry.
由于德国阳光蓄电池材料不可能绝对的纯，且正极板与栅架金属(铅锑合金)本身也构成电池组。
Because Germany sunshine battery materials can't be absolutely pure, and positive plate metal, lead antimony alloy with the grid frame itself constitutes a battery pack.
研究分析了合金过渡层与金属基体接合界面组织结构。
The microstructure between alloy transition layer and base metal has been studied.
最终美国发明家Stanford Ovshinsky与他的公司ECD Ovonics成功地制备了随机结构的金属氢合金，实现了性能改良。
Eventually Stanford Ovshinsky, an American inventor, and his company, now known as ECD Ovonics, succeeded in creating metal-hydride alloys with a disordered structure that improved performance.
讨论选用以阐明物理冶金与合金设计基本概念的金属合金当中的性质结构关系。
Discusses structure-property relationships in metallic alloys selected to illustrate some basic concepts of physical metallurgy and alloy design.
这些布满美丽的铜绿的旧线杆与金属构件铝合金门窗一起构成了这栋小屋。
The old timbers with beautiful patinas are complimented with steel details, aluminium doors and Windows.
合金与纯金属的区别是什么？
本文探讨了有关二聚体的形成与溶剂极性、溶液浓度、取代基团性质及络合金属原子的关系。
In this paper, the correlations of the formation of dimers with solvent polarity, concentration, nature of substituent group and central metal were investigated.
如果流体与活泼金属(例如银铜合金)发生反应，那么必然改变泵和阀的设计。
If the fluid reacts with active metals, such as silver and copper alloys, pump and valve designs must change.
通过对蓝宝石的钨金属化，实现了蓝宝石与铌合金的高温封接。
Sapphire and Nb alloy have been successfully brazed by use of tungsten-metallization technique.
金属废料通常经过配混和重熔后生产与废料成分类似的或更多元的合金。
Scrap is usually blended and remelted to produce alloys similar to or more complex than those from which the scrap was derived.
因此传统的磁光记录介质-稀土金属与过渡组金属的合金就表现出局限性，因为这种材料在短波长范围的磁光效应很小。
So the conventional magneto-optical recording median, rare earth-transition metal (Re-Tm) alloys, is limited, because of its small Kerr rotation in the region of short wavelength.
锌在锌锢合金中的阳极溶出机理与金属单质锌相同，但不同于表面覆盖锢层的金属锌。
The former takes place in solid indium solution. The latter in alloys, which is the same as pure metal Zinc.
本文主要研究了LF2铝合金与Q235钢之间异种金属电子束焊接工艺。
The dissimilar metals joining between aluminum alloy LF2 and Q235 steel with electron beam welding (EBW) was investigated.
通过对铝合金、结构钢等金属接触腐蚀表面的EDS成分分析和SEM微观形貌分析，探讨金属材料与玄武岩微纤维隔热材料接触腐蚀的原因。
Based on EDS and SEM analysis of metal corrosion surface, the course of contact corrosion between aluminum alloy, structural steel and basaltic microfiber heat-resistant materials were proposed.
随遮色瓷厚度的增加，以镍铬合金与贵金属合金为基底的修复体彩度增加，金沉积为基底的修复体彩度略有下降。
As the opaque thickness increased, the color of restoration based on Ni-Cr and noble metal increased but the color of restoration based on gold sediment decreased.
利用中间过渡层的作用，在镁基金属复合材料上激光熔覆了不锈钢合金层，熔覆层与基体为冶金结合。
With the effect of spraying transitional layer, a stainless steel alloy layer was obtained on the magnesium based metal matrix composites by laser cladding.
试验表明，变质和细化元素的添加对该金属基复合材料组织的影响与相应的基体合金一致。
Experimental results showed that, due to the addition of modification or refinement elements, the changes in the structure of the composite were identical with that of unreinforced matrix alloy.
本文还就尼龙合金与金属性能的不同，对如何设计尼龙合金蜗轮进行了初步的探讨。
Because of the difference between the nylon alloy and metal materials, the discussion about how to design worm wheels with the nylon alloy is given.
本文还就尼龙合金与金属性能的不同，对如何设计尼龙合金蜗轮进行了初步的探讨。
Because of the difference between the nylon alloy and metal materials, the discussion about how to design worm wheels with the nylon alloy is given.
应用推荐