对自动真空量热仪的测温电路进行了改进。
The circuit of measuring temperature in the automatic vacuum calorimeter is improved.
采用差示扫描量热仪研究了合金的熔化特性。
利用锥形量热仪研究了表面处理剂对膨胀阻燃体系的影响；
The influence of surface preparation agents on intumescent flame retardant system was researched by cone calorimeter.
利用差示扫描量热仪对杂化材料的固化动力学进行了研究。
The kinetic curing reaction of hybrid materials performs by differential scanning calorimetry (DSC) technique at different heating rate.
最后，通过红外光谱仪、差示扫描量热仪，对接枝物结构进行表征。
Structural Characterization of graft polymer was performed by Infrared spectrograph and differential scanning calorimeter.
在国外，加速量热仪（ARC）已被广泛应用于锂离子蓄电池的研究。
Accelerating rate calorimeter (ARC) is suitable to studying both the thermokinetics and thermodynamics of lithium ion battery.
介绍了四种差示扫描量热仪温度标准物质的研制过程及所取得的研究成果。
The development of four standard reference materials used for calibrating differential scanning calorimeters and the results obtained are introduced.
通过差示扫描量热仪（DSC）测定了合金细化前后的升温曲线和降温曲线。
The heating curves and the cooling curves before and after addition of refiners have been studied by differential scanning calorimeter (DSC).
利用差示扫描量热仪和动态流变仪对米粉和米淀粉体系的回生特性进行了研究。
The retrogradation characteristics of rice flour and starch system were studied by dsc and dynamic rheometry.
用差示扫描量热仪与扭辨分析检出了四氟乙烯-六氟丙烯共聚物熔体中的转变。
The transition in the melt of FEP copolymer was detected by differential scanning calorimeter and torsional braid analysis techniques.
本文用差示扫描量热仪测量得到不同湿基水分含量的草莓汁的玻璃化转变温度。
The glass - transition temperature of strawberry with different water content are measured using DSC.
从使用操作、数据采集处理系统、信息交换等方面对已有的自动化量热仪进行改进。
To improve automation calorimeter from operation, data acquisition and processing systems, information exchange and other aspects are the main research points.
利用动态流变仪和差示扫描量热仪等手段探讨了浸泡发酵对米粉体系理化特性的影响。
The effects on the physicochemical properties of rice flour by soaking fermentation were studied by Dynamic Rheometry and DSC.
采用场发射环境扫描电子显微镜和差示扫描量热仪研究了复合材料的分散性和结晶性能。
The dispersity and crystallization properties of composites were studied by SEM and DSC. The results showed that the modified MWNTs had better dispersity in the composite than the unmodified one.
采用差示扫描量热仪（DSC）分析了原淀粉和羟丙基淀粉的糊化过程中的热力学性质。
The thermal properties of all the starches during pasting were analyzed by performing DSC.
通过偏光显微镜（PLM）和差示扫描量热仪（DSC）对MB的成核效果进行了表征。
The influence on its crystallization characteristics was also investigated by using PLM and DSC.
用红外光谱（FTIR）和示差扫描量热仪（DSC）对产物的结构和性能进行了表征。
The structure and properties of copolymer was characterized by FT-IR and DSC.
量热仪的操作采用在WIN2000操作系统系统上运行，保证了软件的安全性和稳定性。
Calorimeter is operated on a WIN2000 operating system, ensuring safety and stability of the softwares.
用万能拉伸实验机和差示扫描量热仪(DSC)对物理老化和应变老化的ABS试样进行研究。
ABS samples of physical aging and strain aging were studied by universal tensile test machine and differential scanning calorimeter (DSC).
利用差示扫描量热仪实验研究了几种不同石蜡以及它们的混合物和多元醇二元体系的储热性能。
The thermal storage performances of several kinds of paraffin mixtures and polyalcohols binary systems were studied experimentally by differential scanning calorimeter.
提出了优选量热仪肋片数的分析方法，对量热容器存在最佳气体空间体积的问题进行了分析论证。
The paper presents analysis method of optimizing fin -tube number, and discussion of optimal gas space in calorimeter.
用差示扫描量热仪和动态流变仪对不同水分含量的大米淀粉糊化、短期回生和长期回生特性进行了研究。
The effects of different water content on the gelatinization, short-term and long-term retrogradation of rice starch were studied.
介绍了PARR 6300 量热仪的工作原理、热容量标定、热值计算、使用注意事项及故障分析。
The working principle, thermal capacity calibration, calorific value calculation, attentions in operation and fault analysis of PARR 6300 calorimeter are introduced.
以差示扫描量热仪(dsc)研究凝胶中水的状态及氯化钾、氯化钙对大豆蛋白凝胶中“三态水”的影响。
The state of water in soy protein gel was studied by differential scanning calorimetry (DSC) and the effect of potassium chloride, calcium chloride on the state of water of SPI gel was discussed.
与此同时还应用X射线小角散射技术和示差扫描量热仪等观测结构弛豫的手段测量了人工时效样品的相应现象。
The corresponding phenomena after the specimen was aged artificially was studied with the small Angle X-ray scattering and DSC, which are suitable for observing structure relaxation.
采用差示扫描量热仪dsc研究了复合成核剂hca - 1对聚对苯二甲酸丁二醇酯pbt结晶性能的影响。
The influence of composite nucleating agent HCA-1 on the crystallization of PBT was investigated by means of DSC.
针对热塑性聚合物在锥形量热仪中燃烧测试时的熔融行为，提出了有限厚度的聚合物固体一维不稳态燃烧微分模型。
Based on the study of melting behavior of thermoplastic polymers tested in the cone calorimeter, a differential numerical model for one-dimensional unsteady burning of polymers was put forward.
叙述了差示扫描量热仪(DSC)在橡胶组分分析，橡胶配合剂的选择，橡胶的质量评价等橡胶配方研究中的应用。
Application of differential scanning calorimetry (DSC) to analysis of composition, selection of ingredients and evaluation of quality etc of the compounds were related.
以原位复合方法合成的稀土发光聚己内酰胺（PA6）为研究对象，用差示扫描量热仪（DSC）研究了其结晶行为。
The crystallization behavior of rare-earth luminous polycaprolactam(PA6) prepared through in-situ polymerization was investigated by DSC.
目标化合物经IR，1HNMR和元素分析仪确证了分子结构，运用差示扫描量热仪（DSC）测定了液晶相态温度范围。
The structure of the liquid crystal compound was confirmed by IR, 1HNMR and elementary analysis. The phase transition temperature of it was measured by DSC.
应用推荐