联机采集系统是计费数据联机实时采集系统的一个子系统，由采集终端通过交换机x。
The online data collection system is a subsystem of the whole data collection and billing system. In this system, the telephone billing data in the switch is collected automatically via the X.
针对脉冲式电能表，设计了集成采集终端，该终端能以电力线载波方式和其它设备进行通信。
An integrated acquisition terminal, which can communicate with other devices through electric power line carrier, is designed for the pulsed electric energy meter.
详述了远程数据采集终端、GPRS数据传输、数据分析中心以及系统软件的设计方法和功能实现。
The design mode and functional realization of remote data acquisition terminal, GPRS data transfer, data analysis center and system software are described in detail.
变电站电能量采集终端（ERTU）是变电站数据采集的一个重要厂站级设备，也是数字化变电站的组成部分。
Substation electric energy remote terminal unit(ERTU) is an important plant-level device for substation data acquisition, and it is obviously a part of digital substation system.
在此基础上设计了数据采集终端的硬件，并实现了数据采集终端与监测服务器之间的通信，建立了系统的监测网络。
On this base, designs the data collect terminal's hardware, realizes the communication between the data collect terminal and the inspect service, build the system's net.
其次，对于采集终端和集中器间的底层通信网络，采用短距离无线通信方式组网，系统维护、故障检修和扩充都更容易。
Second, we introduced wireless network between meter nodes and relay nodes, which let maintenancing system, examining trouble, extending system be easy.
EKEMP电子有限公司是在无线解决方案的高新技术企业，自动识别领域，移动数据采集终端和行业解决方案的物流区。
EKEMP Electronics Ltd. is Hi-tech Enterprise in wireless solutions, automatic identify area, mobile data collection terminal and industry solution of logistics area.
用电管理系统架构为：从工业大用户的表计单元到智能采集终端，经过GPRS公网传输到供电局的配电中心及其后台数据管理系统。
In this article, the power consuming administrative system and it′s smart collect unit, which is based on GPRS communication, were introduced in detail.
选用GN-80型GPS接收设备和单片微机进行电力系统状态变量同步采集终端的硬件设计，利用GPS的精确授时作为其同步时钟控制采样脉冲来实现同步采样。
This thesis selects model GN-80 GPS receiver and SCM to design the sampling device. The high accurate time service is used to synchronize the sample clock signal to realize synchronous sampling.
开发了一种基于GPRS技术的水量远传系统，阐述了系统的构成原理，详细论述了水量采集终端、GPRS数传终端等系统硬件的设计方法，及数据中心系统软件的设计流程。
It dissertates the principle of water flux transfer system based on GPRS, and expatiates the design method of water flux gather terminal, GPRS data transfer terminal, data center and system software.
通过该例，我们说明了用轻量级编辑器快速编辑终端用户表单并立即部署这些表单的意义，可以改进数据采集。
Using this pattern, we illustrate the value of quickly editing end-user forms with lightweight editors and deploying these forms immediately, resulting in improved data collection.
采集模型透视图：按照采集点、运行终端、电能表、总加组等采集设备的层次结构进行杳询。
Acquisition model perspective drawing: to enquire by the acquisition device level structure of acquisition point operating terminal electric energy meter total add group etc.
对比传统的数据存储方式，设计一个智能化的USB终端装置，用于实现数据的采集和大容量的数据现场存储显得尤为重要。
Consequently, compare with the traditional data memory model, the design for an intelligentized USB terminal is of great importance for the data collection and large-capacity data on site memory.
可以将本文的工作大致分为五个部分：数据采集、信号探测、分类识别、终端显示、实验分析。
The work of this paper can be divided into five parts: signal collecting, signal detection, classification recognition, terminal display and experimental analysis.
为便于检查阳极块的性能，在导管架上预制了阳极监测系统，现已通过该系统的数据终端成功地采集了首批数据。
The anode monitoring system was preinstalled to the jacket for checking the performance of the anodes. The initial data have been successfully downloaded from the data acquisition terminal.
可以仅对某一员工，班次或收款终端采集数据产生报表。
Selective employee reports so that you can check out the data on any desired employee, shift.
监测终端将采集模块采集的电力参数、开关量和报警信息通过GPRS模块传输给监控中心，实现实时监控。
The electric parameters, switching value and warning information collected by collection module are transfered in order to realize the realtime control by GPRS module.
监测终端通过G20模块将单片机采集的电力参数、开关量和报警信息远程传输，实现实时监控。
The electric parameters, switching value and warning information collected from micro-controller system were transferred remotely by G20 in order to implement the real-time monitor.
实验表明，该终端能够实时采集、处理、存储和远程传输心电数据，并能对病人进行有效定位，提高了心电监护终端的监护水平。
The experiments demonstrate that the terminal can be applied to real -time acquisition, analysis, save and transmission of ECG data with wireless network and to locating the patient accurately.
为达到方便、可靠记录农事信息的目的，开发了由手持终端和上位机数据库组成的农事信息采集系统。
For tracing records of farming informations expediently and credibly, we design the system of collecting farming informations, which consists of the handset and the computer database.
整个图像通信系统由图像采集、图像信号的处理和控制、USB传输和控制、系统接口以及终端的图像还原和存储等几部分组成。
The entire image communication system consists of image capture, image signal processing and the control, the USB transmission and the control, the terminal image return and storage and so on.
终极研制的电力负荷治理终端具有实时数据采集与处理、红外抄表、点阵式液晶模块显示、支持标准通讯规约等功能。'）；
The power load management terminal of this design has real-time data sampling and processing, infrared copy meter, load control, LCD displaying, supporting standard communication protocol and so on.
光纤光栅传感系统一般包括光源、传感器（光纤光栅）、光路解调部分、数据采集分析终端等部分。
The fiber grating sensing system consists of four parts, Broadband Light-source, FBG/LPG based sensor, Signal demodulation section and Signal process section.
因而基于嵌入式技术实现视频的采集、压缩、存储，是移动多媒体终端应用的坚实基础，有着广阔的发展前景。
So capturing and compressing and storing video based on the embedded technique are the groundwork of applications about mobile multimedia terminal, and its perspective will be fine and wide.
传统的从终端用户收集数据的方式，尤其是最初的借助于纸制表单进行数据采集的方式，通常是费时且易出错的。
The traditional way of collecting data from end users, especially the primarily paper-based method, is often time-consuming and error-prone.
终端的图像采集模块采用的是条码采集专用的激光摄像头，可以实现多个条码的一次读取。
The image reading module uses a laser camera specially designed for barcode reading which can scan several barcodes each time.
根据的功能不同，将无线抄表的终端分成采集器、中继器(路由器)及集中器三部分来设计。
According to different functions, the wireless meter reading terminal separate into the collector, the relay (router) and the concentrator.
对于包括条码打印机、条码识读器、数据采集器、无线终端等在内的条码设备有着专业的技术和应用经验。
Including the bar code printer, bar code reader, data collection, such as wireless terminals, bar code equipment have professional experience in technology and applications.
利用终端管理技术可以通过OTA的方式对手机终端进行采集信息，固件更新，参数配置，远程锁定及重新设置等。
DM technology can be used to do data retrieving, firmware update, parameter configuration or remote locking on mobile device by OTA.
利用终端管理技术可以通过OTA的方式对手机终端进行采集信息，固件更新，参数配置，远程锁定及重新设置等。
DM technology can be used to do data retrieving, firmware update, parameter configuration or remote locking on mobile device by OTA.
应用推荐