采用模块化方法进行了功能分解并提出了功能四分法。
The function is decomposed using modular method and the four-classification function method is proposed.
采用模块化方法设计并实现一种支持热归档的异地容灾系统(RDTS)。
This paper presents a Remote Disaster Tolerant System (RDTS) supporting hot archiving under the method of modularization.
论文采用模块化方法对光学元件表面广义疵病检测装置设计开发过程展开研究。
In this paper, modularization is used to study the design and development of an inspection system for generalized defects on an optical surface.
系统软件包括主程序，市电过零中断服务程序和多种子程序构成，采用模块化方法设计。
The system softwares include main program, voltage zero interrupt program and other sub-program, The system is designed with the model block.
采用模块化方法对网络管理功能进行了设计，并在对10164-系列协议理解和研究的基础上，提出公共系统管理功能的模型。
Finally, the scheme of network management function is designed with structured method and the model of SMF is drawn out based on 10164-STANDARD.
这些参与者采用模块化和在一个单元中建筑的方法，可以让他们在需求增长时方便地扩展。
These players are using modularity and building in a cellular approach that allows them to scale as demand is increased.
JB：我认为类似Geronimo采用的模块化方法，对于任何这种规模的软件项目都是很重要的，无论对于开源项目还是对于单独机构的内部项目。
JB: I would say that a modular approach like Geronimo has taken would be essential for any software project of this size, open source or internal to a single organization.
本文采用模块化的设计方法对系统进行设计，缩短了开发周期，减小了开发难度。
The method of modularization is used to design the system. It shortens the period and reduces the difficulty of development.
循环模拟程序的设计采用组合式模块化方法。
The design of cycle simulation program adopts integrated module method.
方法：采用计算机控制，根据操作流程进行系统功能的模块化设计。
Methods The computer control was adopt and based on operational process to design system functional modularization.
介绍了一种采用工业控制组态软件，以模块化方式组建内燃机台架综合测控系统的方法。
An engine rig test system with a control system based on industrial control configuration software module has been introduced.
采用自上向下的模块化设计方法，将PDDC的功能划分为基本单元，实现这些功能模块并组成模块库。
Using Top-Down design method, the whole PDDC function is divided to many units implemented respectively and organized to the module library.
本设计采用模块化设计方法，使设计过程简化，并具有设计再利用和优良的可扩展性。
By using module design method, the process of the design is simplified, and all these modules can be reused.
采用模块化建模方法，可以将模型推广到不同型号的柴油机，为非线性增压柴油机模型的开发打下良好的基础。
As the model adopts the modularized method, it can easily be used for different types of diesels, and can form the basis of non-linear turbocharger diesel engine models.
全面介绍了采用模块化设计方法所设计的系统主程序及设定、预压、通电、中断、模糊控制、熔核尺寸预测子程序等系统软件。
The soft-wares of system main program adopting modularization designing method and subprogram of setting, prepressing, electrifying, interrupting and fuzzy control are generally introduced.
在前人研究的基础上，本文采用模块化设计方法设计了上下位机各自的软件系统。
On the basis of previous research, this thesis respectively designs the upper and lower computers' software system based on modularize design method.
最后采用同步设计技术和模块化设计的方法在FPGA上实现了滑模模糊控制算法。
At last, a The Sliding Mode Fuzzy control algorithm is implemented on FPGA, utilizing synchronous design technology and modular design method.
首先，我设计的系统应采用模块化程序设计方法，采用软件工程的开发原理，既便于系统功能的各种组合和修改。
First of all, I should design a system USES the modularized program design method, using the development of software engineering principles, various combinations of both for the system and revise.
目的针对铝电解故障发生机理及特点，提出采用层次模块化模糊神经网络实现对铝电解故障快速、有效检测的新方法。
This paper proposes a new method, which is a layer construction of Modular Fuzzy Neural Network according to the mechanism and characteristic of Aluminum Electrolysis Fault Diagnosis.
介绍了采用机械补偿方式的变焦距镜头模块化设计方法。
A modularized design method for a zoom lens with mechanical compensation is presented.
整个处理系统采用模块化的软件设计方法。
The modular programming was adopted in all processing system.
基于FPGA和电子设计自动化技术。采用模块化设计的方法和VHDL语言，设计一个基于FPGA的RISC微处理器。
RISC microprocessor is developed by using modular design method and VHDL language based on FPGA and EDA technology.
本文重点对模块化可重组机器人四足步行运动进行规划，采用基于运动学计算的规划方法。
The four-legged walking of modular reconfigurable robot is planned emphasis in this thesis. The motion planning method is on the base of kinematics calculation.
软件部分采用模块化程序设计方法，用C51编写代码。
The modular programming approach is adopted on the software design and code is writed in C51 language.
分析了系统软件的功能，采用模块化软件设计方法，设计了控制系统主程序、中断服务程序以及子程序。
After analysis the function of system software, main program, interrupt service program and subroutine were designed use modeling develop ways.
采用模块化设计方法对CPLD进行设计，并给出了硬件描述语言的具体结构。
With blocking means in CPLD design, the structure of HDL (hardware describe language) program is also given.
该设计方法采用N2分离通路的模块化无阻塞互连结构，实现起来较简单且允许入线具有较高的传输速率。
The method uses a N2 separate access, modularization and nonblocking interconnection frame. The frame is easily fulfilled, and its inputs have high transfer rate.
以模块化的方式采用自顶向下的设计思路，重点阐述了光纤通道链路层的硬件设计方法，并给出了IP核的相关接口。
Focused on the hardware design of the fibre channel link layer, this paper applied modularization thinking in the top-down design process, with relevant IP core interfaces.
以模块化的方式采用自顶向下的设计思路，重点阐述了光纤通道链路层的硬件设计方法，并给出了IP核的相关接口。
Focused on the hardware design of the fibre channel link layer, this paper applied modularization thinking in the top-down design process, with relevant IP core interfaces.
应用推荐