本文采用动态力学分析研究了填料表面状态对复合材料动态力学性能的影响。
Effect of surface state of filler on dynamic mechanical properties of composites was investigated with dynamic mechanical analysis.
此外,采用动态力学分析(DMA)进一步表征了复合材料的储能模量和阻尼因子。
The storage modulus and damping factor of composites were also characterized through dynamic mechanical analysis (DMA).
采用动态力学谱(VES)、示差扫描量热(DSC)、透射电镜(TEM)和扫描电镜(SEM)等测定共混物的微观结构,采用微球柱法评价共混物的血液相容性。
Microphase separated structure of blends has been determined by means of VES. DSC, SEM and TEM. Blood compatibility of the blends was evaluated by column beads method.
通过采用边界元法对高线轧机压下垫块改造模型进行力学分析,开发设计一种适合测量高线轧机油膜轴承动态载荷特性的简易装置。
The screwdown block is improved by mechanics analysis with boundary element method, and a simple device is designed for dynamic load of oil film bearing used in high-speed wire rolling mill.
针对南芬铁矿地下硐室开挖与支护设计,采用有限元分析研究大跨度地下硐室施工的动态力学效应。
This paper approaches the excavating dynamic behavlour and support design for a large cavern in Nanfen Iron Mine using finite element method.
研究表明:采用SHPB技术测量水泥石材料的动态力学性能方法是可行的;
The study shows that the method for measuring the dynamic performance of cement rock material by using the SHPB is feasible.
采用冲击实验装置研究了新型阻尼铝合金材料在冲击载荷作用下的动态力学性能及表征方法。
Impact experiment equipment was used to study the dynamic mechanical properties and characterization method of a new kind of damping aluminum alloy under impact load.
结合工程实例,采用系统动力学的设计思想,详细分析滑动轴承转子系统动态失稳转速的判别方法。
Discriminating methods were analyzed of dynamics stabilization of speed of rotor - journal bearing system with combining engineering practices and adopting theory of system dynamics.
结果表明,采用A TRP法制备的TIPN的动态力学性能和黏结性能均优于常规自由基聚合制备的TIPN。
The results showed that dynamic mechanical and adhesive properties of TIPN prepared by conventional radical polymerization were worse than those of ATRP.
采用IR、GPC、DSC、DMA等仪器对合成的SIBR的微观结构、分子量大小及分布、玻璃化转变温度和动态力学性能进行了分析测试。
The microstructure, molecular weight, molecular weight distribution, glass transition temperature and dynamic properties of synthesized SIBR were characterized by IR, GPC, DSC, DMA.
采用动态热重法研究了含氟聚酰胺酸在整个亚胺化反应温度范围内的反应动力学。
The imidization kinetics of the fluorinated poly(amic-acid) was studied with the whole imidization temperature range using thermal gravity analysis(TG).
采用改进的基于质点速度波形测量的拉格朗日分析方法,研究了率型材料的动态力学性能。
A modified Lagrangian analysis was adopted to study the dynamic mechanical behavior of rate-dependent materials based on particle velocity profile measurement.
采用全动态dsc研究了双马来酰亚胺树脂(BMI)体系的固化反应动力学,建立了固化动力学的唯象模型。
The cure kinetics of bismaleimides (BMI) resin system was investigated by dynamic DSC analysis and the phenomenological model was established.
采用有限元分析软件ANSYS分析了三维机织复合材料悬臂板的动态力学性能,预测了其固有频率和振型。
Dynamic mechanical characteristics of 3d woven composite beams are studied by means of the software of ANSYS and the experimental modal analysis technique.
采用动态热力学分析仪表征了温度和皮肤胶原质损伤对皮肤黏弹性特性的影响。
The dynamic mechanical analyzer (DMA) was employed to evaluate the changes in skin viscoelastic properties as a function of temperature and collagen damage.
采用间歇动态法测定头孢哌酮钠溶析结晶动力学。
Nucleation and growth kinetic parameters were measured by batch dynamic methods.
本文以红茶为研究对象,采用酶技术和超微粉碎技术对红茶的静态萃取、动态萃取和萃取动力学过程进行了系统研究,结论如下。
The static and dynamic extracts and extract kinetics of black tea are systematically studied by technology of enzyme and super-micro-comminution.
辨识器采用RBF神经网络结构和最近邻聚类算法,实现了对系统逆动力学模型的动态辨识。
The system identifier based on RBF neural network which applies nearest neighbor clustering algorithm realizes the identification of the inverse dynamic system model.
之后则应用虚拟样机技术,运用ADAMS动力学分析软件对设计出的模型进行了动态分析,在分析对比了两种不同的设计方案之后,采用了其中一种较好的设计方案;
Then with the visual prototype technology, the dynamic analysis with ADAMS is done for the model and two different projects are contrasted . With the analysis, the better project design is got.
应用三维有限元分析,采用增量计算方法,对某围堰工程承台钢板桩围护结构进行了动态施工力学的三维数值模拟。
The staged construction mechanics of the steel sheet pile retaining structure for a cofferdam project are numerically simulated using 3D FEM incremental computing method.
应用流态化-动态悬浮沉降干法分级新工艺制备的分级钨粉,采用薄料层静态法,对粉末体氧化动力学进行了研究。
Using the thin layer static method, the oxiding kinetics of W powder have been studied. The powder for study is classified by fluidized new technique.
根据冲击动力学理论,采用三维动态有限元方法,模拟研究了地壳中的冲击波对地震触发的影响。
According to the impact dynamics theory, a 3-d dynamic FEM model is used to simulate the effect of the crustal impact waves on the earthquake triggering.
采用动态热重法研究了含氟聚酰胺酸在整个亚胺化反应温度范围内的反应动力学。
Dynamic TG was used to study the imidization kinetics of the fluorinated poly (amic-acid) film.
采用动态热重法研究了含氟聚酰胺酸在整个亚胺化反应温度范围内的反应动力学。
Dynamic TG was used to study the imidization kinetics of the fluorinated poly (amic-acid) film.
应用推荐