配置阵列和逻辑驱动器。
重新配置阵列变数的储存空间。
性能测试工具允许您体验不同的系统配置，比如RAID阵列条带深度和硬盘文件格式，以便了解哪些结果能实现更好的性能。
Performance testing tools let you experiment with different system configurations, such as RAID array stripe size and hard disk file format, to see which combinations result in better performance.
甚至物理卷本身也是逻辑层的一部分，因为物理层仅包含实际的磁盘、设备驱动程序和任何可能配置的阵列。
Even your physical volumes themselves are part of the logical layer, as the physical layer only encompasses the actual disks, device drivers, and any arrays that you might have already configured.
如果没有执行这种配置，默认情况下磁盘阵列只能通过每台计算机上的第一个适配器HBA0以及每个DS4500s上的控制器a进行访问。
If this configuration was not performed, by default the arrays would all be accessed by the first adapter on each computer, HBA0, and consequently the controller a on each DS4500.
磁盘配置采用了一个IBMEXP阵列，连接到一个SCSI控制器上；一个FAStT 600系统，通过两个QLogic 的光纤卡连接到服务器上。
The disk configuration is a mix of IBM EXP arrays attached to a SCSI controller, and a FAStT 600 system connected to the server via two QLogic fiber cards.
现在，项阵列可以是private的，因为子类使用受保护的add方法将配置项添加到列表中。
Now, the items array can be private because the descendant classes use the protected add method to add configuration items to the list.
磁盘配置是混合的IBMexp阵列，附到一个SCSI控制器和一个FAStT 600系统上，通过两个QLogic光纤卡连接到服务器。
The disk configuration is a mix of IBM EXP arrays attached to a SCSI controller and a FAStT 600 system, connected to the server via two QLogic fiber CARDS.
Linux内核使用这些信息在引导时自动检测并启动RAID阵列，因此您应确保对您创建的每个 RAID卷进行了这种配置。
The Linux kernel uses this information to auto-detect and start up RAID arrays at boot time, so you should make sure that every RAID volume you create is configured to do this.
存储配置是一个具有42 个磁盘驱动器的IBMDS4000 series（FAStT）硬件阵列。
The storage configuration was an IBM DS4000 series (FAStT) hardware array with 42 disk drives.
它有8GB的RAM，有三个DS4000磁盘子系统，配置为14个RAID0阵列。
It has 8 GB of RAM and three DS4000 disk subsystems configured as 14 RAID 0 arrays.
邮件数据库分布于五个IBMFastT 200GB阵列，同样配置为RAID0。
The mail databases were spread across five IBM FastT 200 GB arrays, also configured in RAID 0.
所有的磁盘都是从EnterpriseStorageServer(2105型号800)阵列分配的，每一个磁盘都配置为3390型号3。
All disks are allocated from an Enterprise Storage Server (2105 model 800) array with each disk configured as a 3390 model 3.
所有的磁盘都是从EnterpriseStorageServer(2105型号800)阵列分配的，每一个磁盘都配置为3390型号3。
All disks were allocated from an Enterprise Storage Server (2105 model 800) array, with each disk configured as a 3390 model 3.
所有的磁盘都是从EnterpriseStorageServer(2105型号800)阵列分配的；每一个磁盘都配置为3390型号3。
All disks are allocated from an Enterprise Storage Server (2105 model 800) array; each disk is configured as a 3390 model 3.
邮件数据库分散在5个IBMFAStT 600阵列上，其配置也是RAID0。网络访问是通过一个1GB的以太网适配器进行的，它采用的是全双工模式。
The mail databases were spread across five IBM FAStT 600 arrays, also RAID 0. Network access was through a single 1 GB Ethernet adapter running in full duplex mode.
邮件数据库分布于两个IBMEXP阵列（直连SCSI），阵列在每个服务器上都配置为RAID0。
The mail databases were spread across two IBM EXP arrays (direct connect SCSI), configured as RAID 0 on each server.
所有的磁盘都是从一个EnterpriseStorageServer (2105model 800)磁盘阵列中分配的，其中每个阵列都配置为一个3390 model 3。
Disks are allocated from an Enterprise Storage Server (2105 model 800) array, with each disk configured as a 3390 model 3.
对单个磁盘而言，这么做肯定会大幅降低磁盘性能，但对于正确配置的含有BBU的磁盘阵列而言，性能下降得微乎其微。
For single drives this could greatly reduce performance but with a properly battery-backed RAID card with cache, the impact may not be as severe.
例如，存储器电路515可在现场可编程门阵列中存储配置位，其中一个配置位用于生成选择信号。
For example, memory circuit 515 can store configuration bits in a field programmable gate array, where one of the configuration bits is used to generate the select signal.
利用现场可编程门阵列（FP GA）在光互连网络中实现了数据包的硬件路由以及数字交叉开关的动态配置。
With field programmable gate array(FPGA), hardware routing of data packages and dynamic configuration of digital crosspoint switch are realized.
多太阳能阵列模拟器不用写入代码就能进行配置。
Multiple solar array simulators can be configured without writing a single line of code.
当你导入一个配置，你必须确知他们之间的层次是相匹配的。你不能导入一个阵列信息到一个服务器。
You can use the persistence mechanism as a means of backing up your configuration from an enterprise (Enterprise Edition only), array, server, or lower-level object and restoring it when necessary.
迪安斯和罗滕伯格选择了紧凑型Melodie线阵列扬声器来满足精准覆盖角扩声需求，配置为5箱体一列，共4列紧吊装在顶棚。
Deans and Rothenberg selected the tight pattern control of M 'elodie line array loudspeakers to deliver the precise coverage needed, with four hangs of five boxes, flown tight to the ceiling.
本文通过合理地配置光电二极管阵列，设计了钥匙编码自动识别系统。
In this paper, by properly positioning the array of optical diodes, an auto-recognition system of key's codes is developed.
阵列声波测井采用多个接收器配置，从而构成一个接收器阵列，这样可以有效压制噪声，提高数据处理精度。
Array sonic logging use multiple receiver, that would constitute an array receiver. which can effectively suppress noise. It may improve the accuracy of data processing.
连接通过灵活的信号路由单元(SRU)实现，这是一组路由引脚阵列，可在所有DAI组件与SRU之间提供灵活的可配置连接。
Connections are made using the flexible Signal routing Unit (SRU), a matrix routing group of pins that provides configurable and flexible connectivity between all DAI components and the SRU.
连接通过灵活的信号路由单元(SRU)实现，这是一组路由引脚阵列，可在所有DAI组件与SRU之间提供灵活的可配置连接。
Connections are made using the flexible Signal routing Unit (SRU), a matrix routing group of pins that provides configurable and flexible connectivity between all DAI components and the SRU.
应用推荐