后来我们才发现原来这是我儿子落下的婴儿监听器。 监听部分在客房的床下面，接收器在这个放电视的房间，本来是用来听婴儿哭没哭的。
We sat, horrified, until at last we found the “baby monitor” my son had left behind, the apparatus under the bed, the receiver in our TV room, to hear whether the baby was crying.
ESD事情放电通路招致的LED芯片的内部失效，这种失效可能只是部分功用损坏，严重的话也会招致LED永世损坏。
The failure of internal LED chip ESD that discharge path incurred, this failure may be just part of the function is damaged, it will cause serious damage from LED.
由于电力设备工作环境复杂，局部放电信号的检测一直是局部放电研究重要组成部分，影响着进一步的故障诊断。
Because power equipment work in a complex environment, detecting partial discharge signal has been the important part of partial discharge study. Then it affects fault diagnosis of power equipment.
在部分荷电状态（PSOC）下采用不同的充电模式，进行了100%放电深度的对比试验，同时对失效单体电池进行了容量恢复实验。
Under the partial state of charge (PSOC) condition, the experiments for 100% depth of discharge were carried out by using different charging algorithms.
高频高压脉冲电源是介质阻挡放电的核心部分。
The high-frequency and high-voltage pulse power source is the core part of the dielectric barrier discharge.
绝缘配合部分同时考虑了过电压水平和绝缘的放电特性，兼顾了安全可靠和建设、运行成本。
Overvoltage level and insulation flashover characteristics are considered in the insulation coordination part as well as safety, reliability, construction and operation cost.
放电的部分要仔细处理，不能被人触摸到。
Recharging parts be preserved not to be contacted by human being.
作为脉冲功率系统的一部分，初级储能系统首先将电能存储起来，通过一定放电回路将所存储的能量压缩并加载到下一级装置上。
As a part of pulse power system, the primary energy storage system first stores the electric energy, then through discharge compresses and loads the stored energy to the next device.
这种动态体放电的方法有效地解决了部分耗尽SOICMOS器件体电位不匹配的问题，得到了可重复性低阈值电压，提高了SRAM的读取速度。
This dynamic body discharge technique eliminates body potential mismatches of PD SOI CMOS devices, achieving repeatable low threshold voltage and fast SRAM access time.
电池管理系统作为电动汽车上不可缺少的一部分，在对电动车的电池管理，充放电控制，电池监控等方面有着很重要的作用。
As an indispensable part of electric vehicle, battery management system plays a critical role in battery management, charge-discharge control and battery monitoring, etc.
已有的研究表第四军医大学硕士学位论文明，当大脑出现癫痈病变时，部分神经元出现过度重复放电有可能使其脑电时间序列处于较低维混沦运动状态。
It is reported that the time series of cerebral electric activity may be low dimension chaotic behavior because of some neurons excess and repeat firing when epilepsy outbreaks.
等离子体源离子注入装置由脉冲负高压源系统、热阴极弧放电系统、真空室及样品台、真空系统和监测系统等五部分组成。
The plasma source ion implantation device consists of pulsed negative high voltage power, hot cathode arc discharge system, vacuum chamber and target stage, vacuum system and monitor system.
充放电电路系统是仪器中的核心技术之一，是仪器重要组成部分。
The system of boosting charge and impulsive discharge is an important part and one of the core technology of the device.
在实验中，应用该模型模拟了大部分已知皮层神经元的脉冲和簇放电行为。
In experiments, using this model we simulated the spiking and bursting behavior of known types of cortical neurons.
电流传感器是电力设备局部放电在线监测系统中的一个重要组成部分，其局部放电信号传输特性直接影响测量结果。
Current sensor is an important element for on line PD monitor of electric power equipment and its transfer characteristic has a direct influence on PD measurement.
然后对扭矩仪的电源部分进行了设计，并通过实验数据对功放电路的输出功率和变压器的传输效率的关系作了深入的研究。
Then the power circuit is designed. at last, with analysis of experiment data the relation of power output and transmission efficiency of transformer is researched in detail.
综述了日本在放电加工领域的最新研究动态，包括成形放电加工、微细放电加工和线切割放电加工三部分内容。
The newest trends of electrical discharge machining (EDM) including die-sinking EDM, micro EDM and wire EDM (WEDM) in Japan were presented.
列出了部分前放电路的单元结构，并分析了它们的工作特点。
The unit structures of some preamplifier circuits were listed and their operating characteristics were analyzed.
但是由于化学镀过程中部分合金被氧化，使复合合金的最大放电容量略有下降。
As oxidation and corrosion is unavoidable during EDN treatment, the maximum discharge capacity decreases slightly for CeMg12 composite with EDN treatment.
在离开放电单元的中心部分的方向上凸出的第二凸出电极可有利于增加放电单元内的放电扩散效率。
A second projection electrode projecting in a direction away from the central portion of the discharge cell can be advantageous of increasing discharge diffusion efficiency within the discharge cell.
每个第一放电单元部分地围绕放电室，并且连续的第一放电单元通过第二放电单元耦合在一起。
Each first discharge unit partially surrounds a discharge cell, and successive first discharge units are coupled together by second discharge units.
在控制器设计部分，分别介绍了电源电路、霍尔传感器电路、控制器电路、功放电路的设计过程。
In the controller design section, the design process of the power supply circuit, Hall sensor circuit, control circuit, power amplifier circuit is introduces. iv.
颞叶癫痫是指导致癫痫发作的神经元放电或损害影响到整个或部分颞叶的局限性癫痫。
Temporal lobe epilepsy is the result of seizures or damage of neurons in the whole or part of the limitations of temporal lobe epilepsy.
该方法主要包括三个部分：（1）利用放电等离子烧结技术实现氮化铝陶瓷的较低温度烧结；
The method comprises: (1) sintering aluminum nitride ceramic at a low temperature by plasma-discharging sintering;
该方法主要包括三个部分：（1）利用放电等离子烧结技术实现氮化铝陶瓷的较低温度烧结；
The method comprises: (1) sintering aluminum nitride ceramic at a low temperature by plasma-discharging sintering;
应用推荐