本文介绍了国外滚动式和喷雾式两种造粒工艺。
This article introduced two kinds of granulating technologies abroad, namely rolling method and spray method.
对废塑料的软化特性、差热分析及热态造粒工艺进行了系统的研究。
The research of the softening characteristics, DTA(differential thermal analysis)and granulating for waste plastics was described.
论述尿素喷淋法造粒工艺中尿素粉尘形成的主要原因及如何减少粉尘弥散的可能途径。
This article discusses the principal for dust formation and the available measures for dust removal in urea prilling process.
本文对陶瓷刚玉磨料干凝胶颗粒进行形状控制的造粒工艺进行了研究，对影响造粒的主要参数进行了讨论。
The granulation process of ceramic corundum abrasives by dry process was investigated and the main parameters which influence the granulation process were discussed in this paper.
本文结合热喷涂用粉末的物性要求，探讨喷雾造粒工艺对粉末物性及涂层质量的影响，综述喷雾造粒技术在热喷涂中的应用研究。
This article discusses the effect of spray granulate on properties of powders and coatings, and applications of spay granulate on thermal spraying are reviewed.
熔融造粒法具有简化工艺流程、降低能耗和生产成本的特点，生产的硝基复合肥产品合格率高。
Nitro-compound fertilizer produced by melt prilling method, which had the characteristics of simple process, low energy consumption and low production cost, had high quality.
本文对这三种造粒技术的机理、工艺特点及工程应用情况进行了简单介绍。
In this article, the mechanism, technological characteristics and engineering application of the three granulating technology are presented briefly.
介绍了齐鲁聚丙烯挤压机的结构原理，并详细阐述了挤压造粒性能与相关工艺控制参数的关系。
Presents the structure principle of Qilu PP extruder, and describes the relationship between extruding granulation performance and relative process control parameters.
进行了各种相关工艺条件对挤出造粒的影响，包括挤出速度、模头温度及螺杆形式和定型模具对挤出成型的研究；
The impact of various process conditions on extrusion and pelletizing is studied, including the change of extrusion speed, die head temperature and screw types.
提出了PTC消磁热敏电阻器生产过程中的几个关键质量控制点，主要包括原料控制、造粒压片控制、烧结工艺控制、电极控制等四方面。
The key quality control points in PTC degaussing thermistor production are presented, including the control over raw material, granulation and press, firing and electrode process.
分析中海石油化学股份有限公司化肥一部尿素装置造粒系统斗提机传动三角皮带多次断裂的原因，总结预防斗提机传动三角皮带断裂的工艺操作方法。
Analyzes reasons for times of fracture of bucket elevator motivating Angle belt of granulation system in Fudao urea plant, and summarizes process operating methods to prevent it from fracturing.
对生产炭黑新工艺技术——湿法造粒进行研究与应用。
Wet pelletizing process, a new technology for producing carbon black is studied and applied.
喷雾、造粒、干燥在同一设备中完成，简化了工艺流程，提高了经济效益。
The process of spray, granulation, drying completes in the the same equipment, which simplifies the process and improve the economic efficiency.
针对当前硫酸价格低，提出了把转鼓蒸汽造粒生产复合肥工艺改为氨酸法造粒生产复合肥。
For the fact that the present sulphuric acid price is low, it is proposed to change the production of compound fertilizer from rotary drum steam granulation to ammonia and acid granulation process.
所述的增强型低温热塑材料的制备工艺，包括造粒、制板、打孔、交联等步骤。
The preparation process of the enhanced low-temperature thermoplastic material comprises the following steps: granulating, plate making, perforating, cross-linking, and the like.
用湿式回转窑工艺设备，在窑内相继对真空过滤机产生的尘泥（含水40％左右）进行初步干燥、造粒、烧结三个过程。
Preliminary dehydration, granulation and sintering of vacuum-filter dust containing 40% of water can continuously be accomplished in wet rotary kiln.
所述制作工艺为：配料、球磨、烘干、预烧、球磨、造粒、成型、排胶、烧结、刷银、烧银、极化。
The preparation technology comprises mixing, ball milling, stoving, presintering, ball milling, pelleting, forming, dumping, sintering, silver brushing, silver sintering and polarizing.
水拉条切粒是一种应用较为广泛的切粒工艺，几乎适用于所有的物料造料。
Water is an application pull of pelletizing the wider pelletizing process, almost all of the materials for making material.
生物造粒流化床是结合造粒流化床固液分离技术和活性污泥法而开发的一种新型污水处理工艺。
Fluidized-pellet-bed (FPB) bioreactor is a kind of new technology of wastewater treatment which combines self-pelleting fluidized bed technologies and activated sludge process.
离心包衣造粒法可以制备具有结肠靶向特性的甲硝唑微丸，其工艺稳定，批与批之间的重现性良好。
Metronidazole-loaded CSDDS was successively established by centrifuge coating granulation method with low batch variation and reproducible.
二手造粒装置和工艺，成套造粒装置和工艺可以在世界各地重新安装。
Used Granulation Plant and Process, complete Granulation Plant and Process for re-location throughout the world.
本发明工艺流程如下：分选→清洗→粉碎→挤出→冷却造粒→成型加工。
The technique processes are as follows: sorting, cleaning, crushing, extruding, cooling and granulating and molding and processing.
结论用挤出滚圆法制备氨咖黄敏胶囊，造粒容易，效率高，工艺简便，成本降低。
Results The external appearance of pellet prepared by extrusion spheronization method was regular round, the pellet size was even, and the pelleting rate w…
结论离心造粒法制备左旋泮托拉唑钠肠溶微丸的工艺可行、质量可靠。
Conclusions the preparation of (-) -pantoprazole sodium enteric-coated pellets is feasible and the quality of the pellets is reliable.
制备工艺主要包括配料、干法球磨、调料陈腐、过筛造 粒工序；
The preparation process includes the main steps of preparing material, dry ball milling, regulating material and ageing, sieving and pelletizing.
制备工艺主要包括配料、干法球磨、调料陈腐、过筛造 粒工序；
The preparation process includes the main steps of preparing material, dry ball milling, regulating material and ageing, sieving and pelletizing.
应用推荐