俯仰积分和俯仰加速度传感器信号(以红色和黄色表示)应该表现出显著的值。
The signal of the pitch integral and the pitch acceleration sensor (here red and yellow) should show a significant value.
根据卫星信号，连同轮速传感器输入的速度和仪表所示的方向，即使在汽车移动时也能确定它的位置。
The satellite signals, along with inputs on speed from a wheel-speed sensor and direction from a meter, determine the car's position even as it moves.
卫星信号加上轮速传感器的速度输入以及仪表所示的方向，就能确定汽车的位置，即使它在开动中。
The satellite signals, along with inputs on speed from a wheel-speed sensor and direction from a meter, determine the car's position even as it moves. (CET-6, 2002.1
加速度传感器数值可能被颠簸和噪音影响。应用低通过滤器在信号上可以是它平滑，并摆脱高频噪音的干扰。
Accelerometer readings can be jerky and noisy. Applying low-pass filtering on the signal allows you to smooth it and get rid of high frequency noise.
本研究提出了一种利用普通的电磁式速度传感器检测超低频绝对振动信号的技术方案。
This research offers the technical scheme of detecting ULF Absolute Vibratory signal by the normal electromagnetism rate transducer.
传感器信号以这样一种方式影响变频器，使牵引箔的速度保持不变。
The sensor signal affects the frequency converter in such a way that the draw-off speed of the foil remains constant.
该系统采用光电编码器作为速度检测传感器，控制方式采用PID数字控制，控制输出采用PWM数字信号至驱动电路对电机调速。
This system USES photoelectric coder as speed detecting sensor, USES PID digital controller as control method, USES PWM signal as control output to regulate speed.
对磁电式速度传感器采集的水泵轴承振动信号分别进行了短时傅立叶变换、小波变换、小波包变换。
The vibrating signals collected from pump bearings by a velocity sensor were analyzed with short time Fourier transform(STFT), wavelet transform(WT) and wavelet packet transform(WPT) in the paper.
ECU(20)根据传感器信号在预定时间内计算出曲轴(17)的旋转速度。
The ECU (20) calculates a rotation speed of a crankshaft (17) in a predetermined period based on the sensor signal.
阐述了光电式速度传感器获取光电信号，跟踪滤波输出的随机窄带基波信号、波形预处理及应用。
To obtain photoelectric signal of the photoelectric speed sensor, tracking to filtering narrow band random base-wave which is output, voltage wave beforehand transaction and application are expounded.
研究采用高频注入法的无传感器直接转矩控制系统，通过注入特定的高频信号来追踪电机转子的空间凸极效应，以此得到转子位置和速度值。
In the sensorless control system, a specified high frequency signal is injected in to trace the magnetic anisotropy of the motor, by which we can get the value of rotor speed and position.
采用耐高温的锁定型霍尔元件和钐钴永磁转子分别构成位置与速度传感器，并设计相应的速度信号倍频电路与位置信号译码电路。
Fireresistant Hall device and SmCo rotor is used to design position and speed sensor, and the corresponding doubling circuit and decoding circuit is designed.
单片机f - V接口装置是用于将6K机车速度传感器输出信号转换为适合于国产ZTL - 3型自动停车装置输入要求的装置。
Single chip processor F-V interface unit is a unit of converting the output signal of speed transducer for 6k locomotive into input signal demanded by domestic ZTL-3 automatic train stop apparatus.
本文在课题组多年来对交流电机pch控制研究的基础上，引入了无速度传感器控制，实现对电动机转速信号的估计。
In this paper, on based research of PCH control of AC motors by research group, speed sensorless control is introduced, then speed estimation of AC motor is realized.
在测量硅微电容式加速度传感器时，由于器件信号的微弱和寄生电容的干扰，提高加速度的稳定性和分辨率非常困难。
Due to the parasitic capacitance and weak output signal, which is limited by its dimensions, it is difficult to improve the resolution and stability of micro accelerometer efficiently.
磁环式检波器是将机械震动的速度信号转换成电压信号输出的一种电磁传感器。
The magnetic loop geophone is a type of electromagnetism sensor which transforms mechanistic liberate into electric signal.
讨论了在SAW气体的传感器中把化学信号(气体浓度)转换成物理信号(SAW相速度变化)的机制以及将它们彼此分离开来的方法。
The conversion mechanisms of a chemical signal (gas concentration) into a physical signal (SAW phase velocity change) in SAW gas sensors and the way to separate them are discussed.
研究了获取管道振动噪声干扰特征的方法，介绍了基于加速度传感器的管道振动信号的采集。
A method of acquiring pipeline vibration noise is studied, and sampling of pipeline vibration signals using an acceleration sensor introduced.
通过对安装在反应堆压力壳上的多个加速度传感器的信号进行采集，并经过信号预处理、时频变换、神经网络计算等过程，实现对核电站松动件碰撞位置的定位。
The loose part impact positions are located by analyzing signals from accelerometers mounted on the reactor vessel with signal pre processing, time frequency transforms, and neural networks.
来自速度传感器(18)的传感器信号被输入到ECU (20)。
A sensor signal from a speed sensor (18) is inputted into an ECU (20).
混合集成光学加速度计是一种实用型的实时加速度传感器，在信号处理过程中采用了光相位调制和交流相位跟踪零差补偿技术(PTAC)。
The hybrid integrated optical accelerometer is a kind of practical accelerometer, which adopts optical phase modulation and alternating current phase tracking and homodyne compensation scheme (PTAC).
测速传感器选用步进电机测速形式，测速传感器向秤重仪表发出系列脉冲信号，每个脉冲代表皮带行程的一个单位，脉冲频率和皮带速度成正比。
Choose stepping motor speed sensor speed form, to speed sensor weighed instrument issued a series of pulses, Each pulse represents one of the units.
传感器电缆用于连接传感器和电子控制单元（ECU），传递传感器发出的车轮速度信号。
The Sensor Cable is used for connecting the sensor to the Electronic Control Unit (ECU), transmitting the wheel speed signal sent out the sensor.
针对汽车悬架测试台的基本结构和受力过程，设计了高精度力传感器和速度传感器输出信号的调理模块。
The system structure, functions and design principles of a VXI bus based signal conditioning system and signal conditioning module are introduced.
其方法包括以下步骤：①通过传感器采振动台的加速度量，并转换成电信号；
The method comprises the processes: (1) the acceleration value of the vibration table is collected and converted into electric signals;
其方法包括以下步骤：①通过传感器采振动台的加速度量，并转换成电信号；
The method comprises the processes: (1) the acceleration value of the vibration table is collected and converted into electric signals;
应用推荐