通过数值分析研究了损伤结构元件的动力响应的特性。
The dynamic response of damaged structural components have been studied numerically.
本文通过数值分析,得出了MTMD系统最优设计参数。
By using numerical analysis, the optimal design parameters of MTMD system are obtained.
通过数值分析,模拟了太阳辐照条件下土壤内温度和含水率分布曲线。
The temperature and volumetric moisture content distribution under exposure of solar radiation are simulated by numerical analysis.
文中通过数值分析和计算,讨论了粘土爆炸压实效果与柱形装药之间的关系。
The relationship between the press effect of clay by explosion and cylinder charge is discussed by a numerical analysis and calculation in this paper.
本文通过数值分析和计算,讨论了粘土爆炸压实效果与柱形装药之间的关系。
Through the number analysis and computeration, the relationship between the press effect of clay by explosion and the cylinder charge is discussed in this paper.
通过数值分析提出,构件表面应力梯度和贴片厚度是影响厚度效应的主要因素。
Through the numerical analysis, it is posed that the structure surface stress gradient and the coating thickness are the principal factor that influence thickness effect.
第四章是本文的实证部分,通过数值分析得出标度与长记忆性对期权定价的影响。
Chapter IV is the empirical part, we obtain how scaling and long-range dependence affect option pricing by numerical analysis.
通过数值分析,给出了内外圈和接触体的应力分布曲线以及接触产生的最大应力位置。
By numerical analyzing, both the maximum stress position generated by contacting, and the stress distributing curve of inner-outer RACES and contacting body were presented.
通过数值分析的方法推导出光纤参量放大饱和信号增益和信号输出功率的数学表达式。
Two very pithy and powerful analytical expressions for saturated signal gain and signal output power of fiber optical parametric amplifiers are educed with numerical analysis.
通过数值分析,对其变形与滑移场进行了研究,并与相同条件下的土钉支护进行了比较。
Subsequently, deformation and critical sliding zone were analyzed with finite difference method. The calculated results were compared with the soil-nailed support system.
通过数值分析,体现了该技术在严格控制基坑变形、超深基坑支护方面具有明显的优越性。
By the numerical analysis, its advantages such as small displacements and application to super-deep excavations are investigated.
本文通过数值分析研究了L D抽运方式对双包层光纤激光器增益特性及光纤内光功率分布的影响。
The gain character and power density distribution in the active fiber of double clad fiber laser (DCFL) with different pump modes are investigated by means of numerical analysis.
通过数值分析,得到树冠火蔓延速度特性曲线,研究水份蒸发和有机物热解对树冠火蔓延速度的影响。
The effects of moisture vaporization and organic matter pyrolysis on crown fire spreading are discussed, and the characteristic curves are obtained by numerical calculation.
通过数值分析,研究了MTMD系统各设计参数之间的关系,给出了MTMD系统最优参数设计建议。
Based on numerical study, the researches have been made on the correlation between design parameters of MTMD. Simultaneously, the suggestion for optimal parameters of MTMD has been given.
通过数值分析,给出了一系列描述平面螺旋线圈磁场分布特性的曲线,讨论了线圈结构对磁场分布的影响规律。
By numerical analysis, a series of curves are given to describe the magnetic flux density distribution character of the flat spiral coil.
在总结目前挡土墙研究方面已取得的进展的基础上,本文通过数值分析和模型试验,对高速列车荷载作用于刚性挡土墙上土压力的大小及其分布规律进行了研究。
In this dissertation, model tests and numerical analyses are performed to research the magnitudes and distributions of the earth pressures against rigid retaining wail on high-speed train load.
推导了平均第一通过时间(MFPT)方程,并在弱噪声和短相关近似下,得出方程的解; 通过数值分析阐明了平均第一通过时间和噪声关联时间之间的联系。
With the aid of the projective operator technique, an integro-differential equation for the porbability density and an approximate equation for the mean first-passage time (MFPT) have been derived.
通过数值计算,分析了材料参数和球体的半径比对孔穴生成和增长的影响,并与相应的静态结果进行了比较。
The influence of the material parameters on the void formation and growth is considered by numerical computation and the results are compared with those for static analysis.
通过数值计算和分析,给出了临界速度与冲击质量、线性强化模量及临界时间间的关系。
By numerical computation and analysis the relationship among critical velocity and impact mass, hardening modulus, buckling time was given.
通过数值模拟,分析良性蠕虫出现早晚及良性蠕虫的不同对抗策略对蠕虫传播控制的影响。
Through numerical simulation, the influence for worm control of anti worm appearance time and the anti polices is analyzed.
通过数值计算,分析了土层模量变化、土层饱和度变化以及桩身截面变化对桩顶频域和时域响应曲线的影响。
Through numerical calculation, the influences of the variations of the modulus and degree of saturation of soil layer and cross-section of the pile on the response are analyzed.
通过数值模拟方法分析供热管网的瞬变流动工况,对研究供热管网的具体水锤防护措施有参考价值和指导意义。
Through the numerical simulation to transient analysis in heating networks, it is consult value and guide significance for the water hammer protection measure.
通过数值模拟分析不同因素对激光多点点火的影响。
Through the numerical simulations we analyze the influence on laser ignition under the different factors.
通过数值计算分析,及具体工程的实践,表明该技术具有良好的抗滑和防冲效果,值得推广应用。
Through numerical computation and analysis, and project practice, it indicated that this technology has good effect in anti-slide and guard against flushes, which is worth promoting its application.
通过数值模拟分析,提示了厚煤层综放开采时顶煤运移和应力分布规律。
Through numerical simulation and analysis, the top coal movement and stress distribution in mechanized top caving mining of thick coal seam is revealed.
通过数值模拟结果之间的对比分析,揭示出岩石试样宏观破坏模式随细观层次上韦伯分布参数的变化而不同。
It has been revealed by the comparison of numerical simulation results that the macro-failure modes of rock samples are different according to parameters of Weibull distribution at mesoscale level.
文中通过数值计算分析了这种局部管材突变对水锤防护的影响。
An analysis of the effects of great material change of some pipes on water hammer prevention is made by a numerical calculation.
通过数值计算分析了原子运动速度、场模结构参数和平均光子数对光场二阶相干度和模间相干度的影响。
The influence of atomic motion, the field structure and intensity of photons on second-order correlation function and two-mode correlation function are obtained by numerical calculation.
通过数值模拟,分析了叶片周向弯曲对大折转角压气机叶栅内分离结构的影响。
A numerical simulation was performed to analyze the effect of bowed blades on the separation structures in a high-turning compressor cascade.
通过数值模拟计算,分析了两种不同的空穴位置下固液相变换热过程的差别。
The differences of solid liquid phase change heat transfer process between two different void positions are analyzed through numerical simulation.
应用推荐