通过力学分析，得出弧形挑膜齿材料必须满足的强度要求。
The strength requirement of the arc spring-finger material contented has been attained by mechanics analysis.
本文通过力学分析和数值计算，讨论减小缺口宽度的可能性。
Through mechanical analysis and numerical calculation the possibility of reducing gap the width is discussed in this paper.
本文通过力学分析与数学推导，对已有的三种钻进模型进行了分析推理。
By using strict mechanical analysis and mathematical treatment, three rock-bit interaction models reported in literature are analyzed.
结果：力学模拟实验及动物实验证明通过力学分析得到的公式是基本正确的。
Results: The simulated test and animal experiments reveal that biomechanical formula is right.
通过力学分析，建立了离心调速器系统的动力学方程，应用李雅普·诺夫直接方法得到该系统稳定平衡点的条件。
By using mechanical analysis, the dynamic equation of the system was established, the Lyapunov direct method was applied to obtain stability conditions of system equilibrium points.
通过采用边界元法对高线轧机压下垫块改造模型进行力学分析，开发设计一种适合测量高线轧机油膜轴承动态载荷特性的简易装置。
The screwdown block is improved by mechanics analysis with boundary element method, and a simple device is designed for dynamic load of oil film bearing used in high-speed wire rolling mill.
通过动力学分析、热分析和静力分析的有机结合，对该类型结构计算进行了有益补充。
The analytical skill of structural analysis can be enhanced by this method which combines dynamic simulation analysis, thermal analysis and static analysis.
通过对离合器传动系动力学分析，建立了车辆起步时变速器输入轴速度与离合器接合位移之间的传递函数模型。
Transfer function model between the input speed of transmission and the engagement displacement of the clutch is built up through an analysis on the system of drive of the vehicle.
通过对生物质原料的力学分析，设计了开式成型的变径成型锥头。
Through the mechanical analysis of biomass materials, we designed a variable-diameter conical head with the open molding and verified our results using small wood shavings, sawdust and so on.
通过对关节式移动机器人越障过程运动学和动力学分析，得出控制移动机器人越障时保证动态稳定性的约束条件。
Analyzed kinematics and dynamics of the obstacle negotiations for an articulated mobile robot a restriction condition to guarantee dynamic stability when it gets over the obstacles.
通过抗滑桩结构的力学分析，建立了抗滑桩结构的有限差分模型。
The mechanical analysis is made on anti-slide pile with a new model of finite difference method.
通过结构设计和力学分析，得出了该工具横向振动频率和激振力公式。
Through the structural design and mechanical analysis, the formula of the lateral vibration frequency and excitation force has been obtained.
通过对驱动和反拖两种状态的力学分析，建立了汽车动力性检测模型。
Mechanical analysis has been done on driving and reverse driving states, then a vehicle dynamic testing model is developed.
通过静力学分析得到了手指抓取力的表达式以及影响因素。
The factors which affect the grasping forces are analyzed by the statics analysis.
本文通过实验对曲棍球击球技术进行了动力学分析。
A dynamic analysis on the batting skill of hockey is presented by experiments.
通过热力学分析，探讨了铋的凝固析出机制。
The segregation mechanism of Bi was approached based on thermo-kinetics analysis.
针织物受力时产生起拱变形现象，通过力学和数学分析，建立了力与线圈长度的关系式。
Based on the mechanical analysis, the equation between stress and loop length is set up, and it is proved by testing result of kitted fabrics with different stitch densities.
通过动力学分析和有限元模拟，设计出了具有高过载保护功能的加速度传感器结构。
Utilizing the dynamics analysis and finite element simulation, the acceleration sensor's mechanical structure with high overload protection capability was designed.
通过实例分析表明，非线性动力学分析方法是行之有效的。
The effectiveness of the nonlinear dynamic method is confirmed by the practical analysis.
本文针对这些问题，通过选择合适的缆索力学模型并进行力学分析，得出相关的计算、校核公式。
So this paper aim at these questions, though choose suitable mechanics model of cable and analyze the model to educe correlative formula of calculate and validate.
通过金刚石动力学分析说明石墨重结晶是金刚石合成过程中的一个重要问题。
From the diamond's dynamic analysis, it is shown that recrystallization of graphite is a key problem of diamond synthesis.
本研究将通过步态相关的动力学分析对传统标准手术入路与微创入路作一比较。
In the present study, a minimally invasive approach was compared with a traditional standard approach in terms of the effect on gait kinematics as demonstrated with gait analysis and electromyography.
通过膝关节载荷静力学分析，进一步认识了杠铃力量训练过程中膝关节的力学特点和变化规律。
By the statics analysis of knee joint, the article has a further research on the mechanics characteristic of knee joint in the barbell strength training.
该文通过对车辆的动力学分析，建立了事故再现中的汽车轨迹模型，并实现了计算机软件，最后对模型进行了验证。
Through the dynamic analysis of vehicle, the Vehicle Trajectory Model is built, and the programming of the model is established and validated in the paper.
为了简化吸收循环热力学分析方法，通过吸收循环和压缩式循环的对比，提出吸收循环卡诺模型分析方法。
The Carnot analysis method was proposed for the simplification of the thermodynamic analysis of the absorption cycle, by the comparison of the absorption cycle and the compression cycle.
通过动力学分析，建立了车型弹性倒立摆系统的动力学控制模型，并对系统进行了线性化和可控、可观性分析。
Its dynamic control mode of vehicle tyre is derived by dynamics analysis, and the linearization, controllability and observability of the system are analyzed.
通过对靠船墩三维结构随机力学分析，提出基于可靠度理论下的靠船墩设计方法，可直接应用于工程实践。
Based on the analysis of three-dimensional structure random mechanics of pier, this paper advances reliability design method, which can be applied directly in engineering practice.
并在此基础上通过建立力学数学模型完成旋转控制头在安装偏斜的情况下的动力学分析。
And then, the mathematics model was firstly set up to analyze the force that the rotary control head endured when the preventer installed aslant.
并通过硫酸浸出高铅碲渣中碲的条件实验验证了热力学分析的结果。
Thermodynamic analysis results show that tellurium can be leached by sulfuric acid leaching method from lead-rich tellurium slag.
通过对常用支撑结构的力学分析与性能对比，选用简支梁作为压力传感器敏感变形机构。
After analyzing and comparing the performance of normal bracing structures in mechanics, we use a freely supported beam for sensing deforming structure.
应用推荐