作为单颗粒催化剂上反应-扩散过程通用模拟软件开发的基础,该模型明显优于其他常规模型。
As the foundation for developing general software simulating the diffusion - reaction processes involved over a pellet of catalyst, this model has obvious advantage over others used usually.
采用有限元通用商业软件ANSYS,对碳纤维布抗震加固墙片的试验过程进行了模拟分析。
Here is a simulating analysis on the experimental specimen of the carbon fiber reinforced shock-resisting masonry wall using the common limited member commercial software ANSYS.
并采用监控程序、I2C总线模拟通用子程序等软件实现测控功能和数字平滑滤波。
And universal subprogram was simulated by monitor routine and I2C bus to realize control function and digital smooth filtering.
应用可视化数值模拟方法,借助于大型通用有限元软件ANSYS建立砂轮回转的数学模型,对离心应力进行了仿真研究。
A simulation study was made of the centrifugal stresses exerted on a grinding wheel by means of a visual numerical simulation technique, using the FEM software ANSYS.
本文综合处理复杂工程中的水锤问题,给出了数值模拟水锤现象的通用计算机软件,并对实例进行了计算。
In this paper, the problems of water hammer in complicated engineering are synthetically considered. The computer software in common use for numerical simulation of water hammer has been provided.
利用大型通用有限元分析软件对短肢剪力墙结构墙肢构件进行了开裂模拟分析。
The use of large-scale general-purpose finite element analysis software on the short-limb shear wall structural walls were cracking component simulation analysis.
以通用有限元软件包为基础,开发了能够模拟复合材料整个制造过程中复杂物理化学变化的软件。
The finite element analysis software, which was based on the general finite element software package, was developed for numerical simulation of the entire composite cure process.
本文在理论上提出了逆向统计模拟思想,并用以开发了NMOS数字集成电路统计模拟通用软件——STANMOS。
This paper theoretically advances the conception of reverse statistical simulation in the statistical analysis of VLSI, by which a statistical simulator of NMAS digital circuit STANMOS is developed.
本文介绍了软件无线电的基本思想,及其在通用卫星模拟器设计中的应用与优势。
This paper introduces the concept of software radio and the application and advantages of software radio for the design of generic satellite simulators.
利用大型通用有限元分析软件ANSYS简单模拟辽西地区中生代末期岩石圈动力学演化过程。
Using general finite element program ANSYS, we simulate a dynamical evolution process of the lithosphere of west Liaoning, northeast China in the late Mesozoic.
利用大型通用有限元软件ANSYS的生死单元功能对钢筋混凝土结构楼房的爆破拆除进行模拟。
ANSYS software is used to simulate the frame-structured building being destroyed with controlled blasting is introduced in this paper.
通过将RTDS在稳定性课题中的模拟分析结果与通用非实时软件PSASP的结果进行对比,证明rtds也可以有效地应用于电力系统稳定分析的研究领域。
In simulating stability project the result of RTDS and PSASP are compared in this paper, which proves that RTDS can be used efficiently in power system stability area.
本文拟在总结已有研究成果基础上,对真空预压法加固吹填土地基进行了研究,并运用大型通用有限元软件ABAQUS对加固过程进行了有限元模拟。
Base on the existing research results, this paper make a study on it and do a simulation of the improvement process with the help of finite element software ABAQUS.
在此基础上,讨论了字典法的自动实现方法,编制了通用模拟电路直流故障诊断软件。
After that the approach of automatically generating the fault dictionary is discussed, and a general diagnosis program for analogue circuits has been written to implement these techniques.
利用计算流体力学通用软件FLUENT对整体流场和定转子间隙区流场中周向流速度场进行了数值模拟,并对理论分析进行了补充。
The field of whole flow field and tangential velocity between stator and rotor were imitated based on FLUENT. The analysis in theory was replenished.
论文采用FLUENT通用软件对实验工况下的管内对流换热与固壁导热的耦合问题进行了数值模拟。
Numerical calculations for the conjugate problem of in-tube convection and tube wall conduction were conducted on the basis of the experimental measurements using the FLUENT code.
基于通用有限元软件MARC开发了用于模拟单晶合金材料蠕变性能的用户子程序CRPLAW。
Based on general software MARC, a user subroutine CRPLAW used for single crystal creep analysis has been developed.
应用自编子程式与通用软件ABAQU(上标TM)联机模拟计算了考虑潜热影响的激光涂敷过程温度场的变化。
The effects of latent heat on temperature field were investigated via self-developed code joining with ABAQUS(superscript TM) for laser cladding procedure.
本文利用大型通用有限元软件ANSYS8.0进行了数值模拟,有限元计算结果与国外最新试验数据吻合良好。
According to the latest test results abroad, the software ANSYS8.0 is applied to carry out the finite element nonlinear analysis. The most numerical calculating results agree well with the test data.
本文以大功率电子组件DC/DC电源变换器为例,提出了基于通用的大型有限元分析软件ANSYS进行热模拟分析方法,并利用实验结果对模拟结果进行了验证。
In the paper, a thermal simulation method has been described using ANSYS software based DC/DC power module. Experiment has been done to verify the result of the thermal simulation.
它具有极大的灵活性和通用性,只要改变计算机的软件,就可以实现不同体制雷达回波的模拟,解决了硬件设计和软件算法中的关键技术问题。
The method is of significant flexibility and commonality. So long as the computer software is changed, simulation of different radar system echoes can be implemented. The key technical...
本文的主要工作就是利用大型通用有限元计算软件ANSYS模拟耦合腔行波管慢波结构的热特性和冷测特性并对该软件进行了二次开发。
The main work of this thesis is simulation of the thermal characteristic and cold-test characteristic for coupled-cavity TWT slow-wave structure with ANSYS, which is a finite-element software.
本文的主要工作就是利用大型通用有限元计算软件ANSYS模拟耦合腔行波管慢波结构的热特性和冷测特性并对该软件进行了二次开发。
The main work of this thesis is simulation of the thermal characteristic and cold-test characteristic for coupled-cavity TWT slow-wave structure with ANSYS, which is a finite-element software.
应用推荐