建立了锅炉受热面热力过程通用数学模型。
A generally mathematical model of the thermal process of the boiler heated surface is established in this paper.
建立了催化精馏塔通用数学模型，并给出了求解方法。
A general mathematical model for catalytic distillation columns was proposed and the solution method was given.
提出了适于自动处理任何船舶碰撞责任比例的通用数学模型。
The paper introduces a universal mathematical model capable of automatically processing the collision responsibilities for all types of ship collision.
本文建立了用最小二乘法评定复杂曲面面轮廓度误差的通用数学模型。
In this paper, a general mathematic model of profile error of complex surfaces is proposed with the least squares evaluation.
根据局部热力学平衡原理，建立了地化反应的通用数学模型和求解方法。
Based on the principle of local thermal dynamic equilibrium, a general mathematical model and its solving process were presented.
论文首先推导出雷达标绘的通用数学模型，并进一步确立系统的评估要素。
First of all, the dissertation reasons out the general mathematic models of radar plotting by means of the plane analytic geometry, and establishes the assessment factors of the system.
针对非线性规划最优潮流的通用数学模型，提出了基于可变容差法模型的求解方法。
Flexible tolerance method is proposed for handling the optimal power flow model of nonlinear programming.
建立了求解多分支水轮发电机定子绕组内部故障情况下的稳态电气量的通用数学模型。
The generally mathematical model for calculating the steady state currents of the multi branch hydro generator with the internal armature winding faults is established in this paper.
首先建立了基于磁通控制的可调电抗器的通用数学模型，说明了可调电抗器的基本原理。
First, a mathematic model of adjustable reactors based on the magnetic flux control is established and a deep analysis is made.
本文提出了将组合问题归结为状态空间搜索问题的数学模型和通用算法。
This paper presents the mathematical model and the general algorithms of transforming combinatorial problem into state space search.
近年来，一致认为有一种通用的交通流量可能发生的导致各种数学模型与实验测量的通信模式。有三种类型。
In recent years, various mathematical models and experimental measurements of traffic patterns have led to a consensus about the general kinds of traffic flows that can occur. There are three types.
分析了多假设决策融合问题的共性，为其建立通用的数学模型。
After generalizing the common properties of decision fusion with multiple hypotheses, a general mathematical model was built.
本文提出了一个较通用的直升机机动科目分段函数描述方法，该方法可以对ads - 33e -PRF规定的大部分任务科目建立逆仿真所需的数学模型。
A general mathematical method with subsection function is given to describe helicopter maneuver, most of mission task elements (MTE) defined in ADS-33E-PRF can be modeled.
本文在研究通波塘水文特征和水质特征的基础上，推导出通用性较好的一维动态水量水质数学模型。
On the basis of the hydrological and water quality characteristics of Tongbotang river, a one-dimension-dynamic mathematical model of water quantity and quality was deduced.
提出了多工位级进模工步设计的多目标最优化组合的数学模型、通用算法以及建立其CAD系统的实现方法。
The mathematics model of multiobjective optimum combination, good algorithms and CAD system for strip layout of multistep progressive die are given in this paper.
在传统循环函数的基础之上，根据实际热力系统运行的特点，建立了通用加热器数学模型，并对循环函数法进行了改进。
On the base of the original cyclical function method, a general heater model is presented and cyclical function method is improved considering actual operating characteristics of thermodynamic system.
局部拟合因其具有与通用CAD系统相同的数学模型，所以它是复杂曲面测量几何造型系统的常用方法。
The local fitting method is a common method of measure and geometric modeling systems for complicated curved surface because of its mathematical model the same as that of current CAD system.
文章以网络支路阻抗方程作为电网数学模型，系统地研究了配电网故障计算的通用方法。
In this paper, based on network branch equation, a canonical method for calculating faults in a distribution network is systematically studied.
本文研究了利用二次通用旋转组合设计来进行多因素影响的振动流化床喷雾造粒试验，建立数学模型，得出了具有一定参考价值的最佳操作参数。
Based on the quadratic general rotary unitized design, the experiments effected by multiple factors have been made on vibro - fluidized bed spray granulation in this paper.
并且在加热器基本模型以及各辅助汽水的模型基础上，推导出适用于热力系统热经济性计算软件的通用加热器数学模型，并且建立了软件整体适用的通用计算模型。
Based on the primary heater model and the assistant model, the universal heater mathematics model of the software was deduced and the universal computing model of the whole software was founded.
应用可视化数值模拟方法，借助于大型通用有限元软件ANSYS建立砂轮回转的数学模型，对离心应力进行了仿真研究。
A simulation study was made of the centrifugal stresses exerted on a grinding wheel by means of a visual numerical simulation technique, using the FEM software ANSYS.
文中在MU S IC算法的基础上，建立了平面任意形状阵列二维超分辨测向的数学模型及通用算法。
Based on MUSIC algorithm, a mathematical model of two-dimensional DOA estimation on an arbitrary plane array is established.
通过引用通用函数M，根据欧姆定理和圆柱形导体的磁场渗透公式建立了数学模型，并设计了相应的绝对式涡流传感器及其检测方法。
In this new test theory, by introducing parameter M, a mathematic model was established based on the Ohm law and the cylinder form conductor magnetic field permeability formula.
文章在建立了热力系统加热器的通用性数学模型的基础上，用循环函数法对整个回热系统进行热力计算。
This article derives a general model of heater for thermal dynamic system. Based on the general model, the thermal parameters of regenerating system can be calculated by Circulating Function Method.
采用三因素二次回归通用旋转组合设计，研究了灌水量、氮肥、钾肥的耦合效应对番茄的影响，得到番茄产量对三因素的回归数学模型。
Using quadratic general revolving combination design with 3 factors, the effects of irrigation, nitrogen and potassium fertilization on greenhouse tomato were investigated and quantified.
数学模型和建模方法显示出良好的有效性和通用性。
Accordingly, the mathematical model and the method of modeling are validated to be effective and versatile.
数学模型和建模方法显示出良好的有效性和通用性。
Accordingly, the mathematical model and the method of modeling are validated to be effective and versatile.
应用推荐