用掠角沟道技术和透射电子显微镜分析了这种硅化物的结构。
The structure of synthetic silicides has been investigated with the analysis of channeled low Angle emergence and TEM.
利用透射电子显微镜分析了合金在不同条件下的组织形貌特征。
The microstructure characteristics of the alloy after different deformations were analyzed.
对云南会泽大黑山玄武岩铜矿床地气微粒采样，并用透射电子显微镜分析。
Geogas particles have been sampled from Daheishan basalt copper deposit in the Huize county of Yunnan and analyzed by transmission electron microscopy.
测定了九龙高岭土的可塑性、化学组成、粒度及其分布、白度等，并且做了X—射线和透射电子显微镜分析。
The plasticity, chemical composition, particle size and its distribution, whiteness and so on of jiulong kaolin were measured and analyzed by X-ray and TEM.
用透射电子显微镜（TEM）分析了所制备的样品。
The samples have been analyzed with transmission electron microscope(TEM).
用透射电子显微镜对四方氧化锆多晶（TZP）增韧羟基磷灰石（HA）复合材料的微观相结构进行了观察与分析。
The microstructure and phases present in hydroxyapatite(HA) reinforced by tetragonal zirconia polycrystal (TZP) were investigated by using transmission electron microscopy(TEM).
采用X射线衍射（XRD）、透射电子显微镜（TEM）分析手段对样品的物相、结构、形貌进行了表征和分析。
The sample's crystal phase, structure, morphology and the reaction process were characterized and analyzed by using X-ray diffraction(XRD), transmission electron microscopy(TEM).
光学、扫描电子显微镜和透射电子显微镜观察揭示出各生理群的优势菌，并用能谱仪对颗粒污泥的元素组成进行了分析。
From observation of light microscope, SEM and TEM revealed the predominant bacteria of various groups, and element composition of granular sludge was analysed by EDXA.
用透射电子显微镜观察分析了增强体与基体合金界面的微观组织结构。
Also the microstructures at the interface of fiber and matrix were observed and analyzed through TEM.
利用透射电子显微镜、X射线衍射仪、扫描电子显微镜和X射线能量色散谱仪分析了多层膜的微结构。
The microstructure of multilayers was characterized by high-resolution transmission electron microscopy, X-ray diffraction, scanning electron microscope and energy dispersive spectrometer.
本文以H- 800型透射电子显微镜为例，介绍了几例故障现象、故障分析及故障排除方法。
Taking H-800 electron microscope for example, this article introduces some faults appearance, faults analysis and method of faults exclusion.
用光学显微镜、透射电子显微镜以及电子探针等现代材料试验手段对50钢中存在的大块黑色团状异常组织进行了研究和分析。
The abnormal block and black round structure of 50 axletree steel was studied and analyzed using optical microscopy, transmission electron microscopy, electron probe and so on.
用透射电子显微镜对钛合金基体等离子喷涂羟基磷灰石(HA)生物活性梯度涂层的界面进行了观察与分析。
The interface between plasma spray hydroxyapatite (HA) bioactive gradient coating and ti 6al 4v matrix was studied using transmission electron microscopy.
透射电子显微镜和动态光散射分析表明，其在水溶液中能自组装形成纳米囊泡状结构。
The results observed by transmission electron microscopy and dynamic light scattering revealed that the peptide could self-assemble to form nanovesicles in aqueous solution.
利用光学显微镜、透射电子显微镜和HD- 187.5型硬度计对高锰钢在不同轧制应力条件下的组织和性能进行了分析和研究。
The microstructure and properties of high manganese steel under the conditions of different rolling load were analyzed and studied through the om, TEM and HD-187.5 sclerometer.
采用透射电子显微镜、激光粒度分析仪、流变仪对微球进行了定性和定量的评价。
Transmission electron microscope, laser particle scanning analyzer and rheometer were adopted for qualitative and quantitative evaluations.
用透射电子显微镜（TEM）对密排六方多晶钛在拉伸变形中形成的孪晶进行了观察分析。
The twin formed in tension of HCP polycrystalline titanium was observed by means of TEM.
利用光学显微镜和透射电子显微镜对不同热处理工艺制度下高性能耐火耐候建筑用钢的显微组织进行了观察和分析。
The microstructure of high performance fire-resistant and weathering construction steel after different heat treatment regimes was studied by using OM and TEM.
首次在透射电子显微镜下观察到渗钒层过渡区的形貌，并对过渡区进行了成分分析。
The photograph of transition region of vanadized layers was observed by using TEM for the first time and the composition was analysed.
本文阐述膨胀型防火涂料的主要成分及其制法，并用差示热分析法、热重量分析法、透射电子显微镜等方法研究涂层受热时变化情况。
It described the main components of the expansive fire-retardant paint and its preparation. DSC, TGA and TEM were used to study the film performance during heating.
用透射电子显微镜、扫描探针显微镜、紫外-可见分光光度计和热重分析仪表征了复合材料的物理性能，分析了其吸收蓝移及热稳定性提高的机理。
The physical properties are characterized by TEM, SPM, UV-Vis and TGA. The mechanism of absorption blue-shift effect and the improving of thermal stability of nanocomposite materials are analyzed.
采用表面张力仪、热分析仪对共聚物的表面张力和热力学性质进行分析，利用红外光谱、透射电子显微镜对共聚物的结构和形貌进行了表征。
The surface tension and thermal characteristic of copolymer are analyzed by using surface tension-meter and TA. The structure and transmission morphology are characterized by using IR and TEM.
采用表面张力仪、热分析仪对共聚物的表面张力和热力学性质进行分析，利用红外光谱、透射电子显微镜对共聚物的结构和形貌进行了表征。
The surface tension and thermal characteristic of copolymer are analyzed by using surface tension-meter and TA. The structure and transmission morphology are characterized by using IR and TEM.
应用推荐