个人喜欢选用滑动推拉玻璃门，理由有三：它尺寸刚刚好，又是双层钢化安全玻璃做的，还有保温的功能。
I prefer the sliding glass doors for three reasons. They are a really good size for a batch heater, they are tempered safety glass and they are double layered for insulation.
结果表明，所选用的材料和工艺可行，雷达罩的整体性能和尺寸精度均满足性能指标要求。
The result shows that the selected materials and process are feasible and both the gross property and the size accuracy meet the requirement of performance specification.
安装应根据连接处形状选用不同截面和尺寸的密封垫，并安放正确。
Installation should be based on the shape of the connection of different sections and sizes of sealing gasket, and placed correctly.
一个标签或按钮的内在固有尺寸是根据显示的文本和选用的字体。
A label or button's intrinsic content size is based on the amount of text shown and the font used.
介绍鼓形齿式联轴器的标准结构、选用计算和几何尺寸的计算。
The article describes standard construction, dimension calculation & selection, and geometrical dimension calculation.
阐述减振器机械密封的原理和优点，介绍其结构参数设计包括弹簧设计、油封材料选用和尺寸设计以及O型密封圈沟槽设计等，可供产品开发参考。
This paper describes the principle and merits detailing the design of structure parameters including spring, seal material selection, dimensions and the slot of O-shape sealing ring.
该机还可根据不同物料选用各种形状及尺寸不同的刀片，粒度大小通过更换网布或调整速度获得。
Blades of different size and shape are available for choice according to different materials, and the particle size can be obtained through replacement of screen or adjustment of speed.
本文介绍了滚动花键副的结构、工作原理、特点、系列和尺寸及其选用计算。
This article presents the principle and construction of spline pair with rolling contact, and also introduces their features, applications, series, dimensions and selecting calculations.
根据气压膝关节机构优化后的结构尺寸，对气压膝关节进行结构设计，并对气压控制元件依据规范进行合适的选用。
This paper designs the structure of the pneumatic knee-mechanism according to the optimized size and picks out the optimum pneumatic control unit based upon the criterion.
介绍超高分子量聚乙烯耐磨衬板的尺寸，砌缝的形式，成型工艺，紧固件的选用及其使用与安装。
This paper introduces the size, seam form, moulding technology, the clamp part's selection, use and installation of super_high molecular weight polythene abrasion resistant lining board.
选用水面舰艇用945钢和潜艇用921a钢，研究了不同焊缝外形尺寸对爆炸试验中三缺口试样的中央缺口开裂行为的影响。
Using 945 steel and 921a steel, this article studies the effect of weld profile and size on the cracking behavior of a central notch in a three-notch specimen for an explosion bulge test.
通过对零件的分析，此轴要求精度高，工序适当集中，要求光滑，所以选用的工具和尺寸要量得准。
Part of the analysis, accuracy of this axis, the appropriate concentration processes require smooth, So use the tools and size to measure the potential.
为了研究填料的长、宽、高、比表面积这些特征尺寸对填料热质传递性能的影响，本文选用了三种不同特征尺寸的铝质填料进行冷却除湿实验研究。
In order to analyzing the influents of length, width, height and effective contact area per unit volume, three kinds of fills whose character are different selected as experiment speriment.
通过对零件的分析，此轴要求精度高，工序适当集中，要求光滑，所以选用工具和尺寸要准。
Part of the analysis, accuracy of this axis, the appropriate concentration processes require smooth, and use tools to prospective size.
弄清尺寸对电阻率的影响，对于分析复合导体的磁-热稳定性，设计复合导体的截面构型和判定、合理选用稳定化用铜是有重要意义的。
This phenomenon is important for analysing the magnetic-thermal stability and designing cross section and selecting copper for multi-filamentary superconducting composites.
建立了陀螺的高过载设计约束条件，包括陀螺所选用类型与尺寸参数。
The restriction of gyroscope's high overloading are presented, including gyroscope's style and structure dimension.
通过对零件的分析，此轴要求精度高，工序适当集中，要求光滑，所以选用工具和尺寸要准。
Through to the components analysis, this axis required accuracy is high, the working procedure suitable centralism, the request is smooth, therefore selects the tool and the size wants.
风扇转速与尺寸由于高转速风扇比低转速风扇产生较大的噪音，因此应尽可能尝试及选用低转速风扇。
Fan Speed and Size Since a high speed fan usually generates greater noise than a low speed fan does, a low speed fan should be tried and used whenever possible.
通过选用一种代表开洞拱效率的特征值屈曲荷载参数，研究了腹板孔洞的半径和间距的优化尺寸。
The optimization of the radius of openings and the gap between openings is performed based on a modified eigen buckling load, which corresponds to arch efficiency.
它们都是简单而是用的建筑，为了更好的发挥储存功能，通常由特定的外形、尺寸和体积规定，也基本上选用来自当地的建材。
These are anonymous and simple architectures, completely utilitarian, built with a specific shape and size for better storage; the same way the materials and sources chosen are local and accessible.
直线的斜率与绘图所选用的比例尺寸无关。
The slope of a line is independent of the scales chosen to prepare the graph.
衬板增强石膏板是根据其类型，尺寸，厚度和边缘形状选用。
Gypsum boards with mat reinforcement are selected for use according to their type, size, thickness and edge profile.
选用两阶段成形工艺和合理的模具结构，制备出了具有良好尺寸精度和表面粗糙度的精密齿轮。
The fine spur gear with good size-precision and surface-roughness is obtained through two-stage hole-forming process scheme and reasonable die structure design.
介绍平移式后发动机舱门的结构及工作原理，四连杆机构尺寸的确定及动力学校核，以及空气弹簧、门锁的选用等。
Hence, this paper mainly focuses on the dynamic analysis of the two-side four-bar beating-up motion of an air-je.
介绍平移式后发动机舱门的结构及工作原理，四连杆机构尺寸的确定及动力学校核，以及空气弹簧、门锁的选用等。
Hence, this paper mainly focuses on the dynamic analysis of the two-side four-bar beating-up motion of an air-je.
应用推荐