在制导系统仿真过程，本文完成了信号采集精度的确认、选择位移测量装置、信号转换等工作。
In the process of guided system simulation, we completed these works of Recognizing precision of collection signal, to select displacement measurement devices, signal conversion.
在模态参数估计过程中，仔细选择最好的测量频响通常会得到更好的系统全局极点。
A careful selection of the best measured FRFs will generally produce much better global poles of the system for the modal parameter estimation process.
通过研究设计了可用于温室土壤水分的测量系统，介绍了其方案设计、电路设计和传感器的选择等问题。
A system measuring soil moisture in sunlight greenhouse is studied and designed in the paper and the plan design, circuit design and choice of sensor are introduced.
本文对如何选择一类线性分布参数系统(DPS)的最佳测量点作了讨论。
How to select and locate the measurement points optimally for a class of linear distributed parameter system (DPS) is studied.
结果表明，测量系统工作波段的选择是非常重要的。
The result shows that working waveband selection of measurement system is very important.
通过对在室内冰池进行的平台冰力模型试验中相似律、模型比尺选择、模拟冰条件以及冰力测量系统论述，证明了该项试验是可靠的和严密的。
The test is testified to be reliable and accurate by the description of scaling law of indoor ice pool platform model test, model scale choice, simulated ice conditions, and ice force measure system.
根据光散射和反射的理论，测量系统参数被选择以优化系统。
The measuring system parameters according to the theory of light scattering and reflection are chosen to optimize the system.
根据光散射和反射的理论，测量仪参数被选择以优化系统。
The proper parameters according to the theory of light scattering and reflection are chosen to optimize the measurement instrument.
我国自主开发的北斗卫星导航系统为同步相量测量的时钟源提供了一种新的选择。
The building up of Beidou navigation satellite system developed by China offers a new option of the time service for synchronization phasor measurement.
系统可根据技术要求和用户的选择进行自定义配置，以适合用户的研究，也可在日后升级，使其包括全面的测量模式和选项。
Systems are custom configured with the technologies and options you require to fit your research and can also be upgraded at a later time to include a full complement of measurement modes and options.
本文介绍深孔定向钻进技术的原理、典型的设备选择、工艺、测量系统以及该技术在煤矿工程中的应用。
This paper briefs the long borehole directional drilling technology, selection of typical equipment, process, measuring system and application in coalmines.
从选择最佳测试方案、采取组合测量的测试方法以及测试数据的微机化处理三方面出发，探讨了如何提高自动检测系统测试精度的问题。
Discussing how to improve the accuracy of auto measuring and defecting system by selecting the best plan, taking the group measuring method and computerizing data processing.
雷达发射波形不仅决定了信号处理方法，而且直接影响系统的分辨力、测量精度以及抑制杂波能力等性能，因而它的设计和选择至关重要。
The radar waveform not only direct the signal processing, also affect the system resolution, measure precision, power of suppress clutter and so on. So its design and selection is very important.
为保证矿业权核查工作的准确性，坐标系统的选择及地面控制测量显得尤为重要。
The choice of coordinate system and ground control surveying are critical to the accuracy of the checking work.
论述压电晶体测量系统各环节的选择；
The selection of various apparatus in the piezoelectric quartz pressure measurement system has been discussed in detail.
为实现谷物产量的实时测量，将测产系统搭载在联合收割机上是最好的选择。
Yield monitor system installed on combine harvester is the best way to carry out corn yield measurement real time.
摄像机标定方法的选择和标定精度直接影响着轮对动态视觉测量系统的精度。
The accuracy of vision measurement system is influenced by choices of the calibration method and calibration accuracy.
本文通过对比各种弱磁测量方案，选择了以磁阻传感器为核心来设计车载指南系统。
By contrasted with various of weak magnetic measurement, magnetoresistive sensor is used in design the digital compass system of vehicle.
摘要：坐标系统的选择和转换是工程测量中的一个十分重要的问题。
Abstract: : the choice of coordinate system and the measurement of the conversion of project is a very important problem.
在电能质量监测领域，集成芯片的选择和嵌入式系统的应用是提高实时测量的重要手段。
In the field of power quality monitoring devices, the selection of integrated chips and the application of embedded system are important methods to improve the real-time measurement device.
软件部分主要包括系统的初始化、自检、量程选择、平衡参数设置、定标系数确定、动平衡测量、键盘中断处理、彩色液晶显示等模块。
Software consists of system initialization, self-test, measurement range selection, balance parameter setting, calibration coefficients determining, access programs of keyboard and LCD.
该系统的数字电压表电路简单，可以测量0 ~5V的电压值，并在四位LED数码管上轮流显示或单路选择显示。
The system's digital voltmeter circuit is simple, can measure the voltage 0 ~ 5v, and the four turns on the LED digital display or a single select Show.
现在，计算机和嵌入式系统在测量系统中获得广泛应用，则普适计算模式成为具有优势的选择。
Computer and embedded system were used in measure system becoming more prevalent now then the pervasive computing mode will be a novel choice.
该系统给出了新的阻抗测量算法，并通过选择补偿电感值和变压器变比的方式使电力线阻抗维持在恒定的值上。
This system can measure power line impedance accurately using a new arithmetic, and can adaptively match the power line impedance.
该测温系统利用分布的多台下位机，通过选择合适的测温传感器，并采用调制解调器进行数据传输，解决了温度测量中的多点和分布的问题。
The system solves the temperature measuring problem of multi-points in distributed location by using a central computer and a lot of distributed computers.
介绍了卫星无线测量双向传输系统的优化设计及系统部件参量的选择。
This paper introduces an excellent design of bi-directional transmission sys- tem for the satellite station radio measurement, and choice of system part parameters.
通过对光学干涉系统结构设计和元件参数选择，最大限度地优化了干涉条纹的可见度，并设计出零背景光强标准硅球直径精密测量系统。
On the basis of structure design of optical system and parameter option of optical components, the visibility of interference fringe with zero background intensity is optimized.
系统采用了筛选计量采样图像的方法，排除了测量基准参考点选择不当的测量误差。
Using the sieving to calculate the samples of image, the system can remove the error when chooses the unapt basic testing reference.
可以选择测量区域，并在高压输电网和配电系统上的任何电压等级上进行测量。
Only area power system frequency information data will be measured. The measurement will be taken at any level of power outlets.
以工业控制计算机为控制主机，选择了运动控制卡和智能型激光位移传感器，组成了测量控制系统。
Measurement and control system are made up of the control host computer, motion control card and intelligent laser micro-displacement sensor.
应用推荐