送丝系统的数字化可实现与数字化焊接电源的接口。
The wire feeding system realized interface with the digital welding source.
送丝系统的数字化可实现与数字化焊接电源的接口。
The wire feeding system realizes interface with the digital welding source.
本文介绍了一种永磁式直流力矩电机驱动的动态品质优异的函数送丝系统。
The excellent dynamic characteristic function wire feed system driven by a permanent-magnet DC moment motor is described in this paper.
这大大减小了电机的惯性,将其用于送丝系统将有望提高电弧电压的稳定性。
The stability of arc voltage may be improved by H-bridge driving circuit used for wire feeding system.
在埋弧焊接的变速送丝系统中,其电弧电压的稳定是依靠调节送丝速度实现的。
The stability of arc voltage is realized by adjustment of wire feeding speed in constant wire feeding system of SAW.
通过对二氧化碳焊机送丝系统的电路分析,论述了焊机的自动送丝和手动送丝原理。
The article discusses the automatic and manual feeding concept of the welding machine through analyzing the circuit of the wire feeding system of the CO2 arc welding machine.
在一些对电弧电压、电弧电流要求很高的焊接场合,目前常用的送丝系统将难以满足要求。
In some welding cases of high requirement to arc voltage and arc current, the usual wire feeding system is unable to meet the needs of wire feeding at present.
同模拟控制方式相比,数字控制方式可以采用更加灵活多样的控制算法来对送丝系统进行控制。
Compared with the simulant control manner, the digital control manner can adopt much more agile control algorithms to control the feeder system.
运用MA TLAB语言,采用流体网络分析法,对风力送丝系统中的风送管网进行了模拟调节。
The pipe network in pneumatic cut tobacco feeding system was simulatively regulated by using MATLAB language and fluid network analysis.
研究了一种新型的水下焊接系统。系统中弧焊电源输出阶梯型的外特性,送丝系统采用脉动送丝方式。
A new type of underwater welding system is studied, which includes an oscillating wire feed system and a welding power source with staircase external characteristic.
LN - 10半自动送丝机配有分开的焊丝导向装置,该装置能精确地排列焊丝,同时使焊丝顺利通过整个送丝系统。
The LN-10 semiautomatic wire feeder features the revolutionary split wire guide which precisely aligns and supports the wire through the entire feeding system.
送丝调速系统由功率MOSFET开关控制电路、脉宽调制电路及控制电路构成。
The wire feeder timing system consists of MOSFET switch control circuit, PWM circuit and control circuit.
此系统的硬件主要包括五个子系统,即:焊接电源、弧长控制器、送丝机构、焊矩行走机构和检测机构;
The hardware of the system comprises the five sub-systems, i. e. welding power source, arc length controller, welding wire feeder, welding head traveller and detector.
而送丝速度的调节快慢除了受控于实际的控制系统外,还受电机惯性的影响。
But the adjustment speed of wire feeding is subjected to the actual control system and the motor inertia.
电源线和焊接电缆构成电源回路,为送丝机和控制系统提供电能。
The power cord and welding cable were used to provide power to the wire feeder and control system.
采用波形控制方法对熔滴过渡周期进行控制,同时软件还对时序系统和送丝速度进行精密渐变控制。
The droplet transfer cycles were controlled by wave control method. Also gradual adjustment of the sequential and wire feed rate was controlled by software.
本文针对高质量板材对接填丝激光焊的需要,设计了对缝间隙宽度检测的传感器与送丝控制系统。
To guarantee good quality of butt laser welding with filler wire, a gap width detecting sensor and a wire feeding system has been designed.
高质量的焊接在很大程度上决定于送丝机构的性能,模糊控制相对于传统的PID控制,具有更高的系统鲁棒性和稳定性。
Welding quality depends on the performance of welding wire feeder on a great extent. Fuzzy logic control (FLC) has better robustness and stability than conventional PID control.
设计了以TMS320F 2808DSP为核心的硬件控制系统,包括DSP基本电路、信号反馈电路、驱动电路、送丝电路以及保护电路。
A hardware control system based on DSP TMS320F2808 was designed, including DSP base circuit, signal feedback circuit, drive circuit, wire driving circuit and protection circuit.
本文介绍一种SCR整流埋弧自动焊机电源及送丝控制,单片机应用系统。
The SCR Rectifier Auto-SAW power source and wire feeder with single chip computer control is introduced in this paper.
介绍了利用编码器实现送丝电机转速的数字反馈转速控制调速系统。
Making use of wire feed motor with encoder, a digital wire feeder system based on speed feedback of rotation speed with encoder of wire feed motor.
该系统也配有一个坚固耐用的4轮送丝驱动设计,能产生稳定的送丝。
The system also features a rugged 4 driven roll design for positive wire feeding.
系统可用于等速送丝埋弧自动焊的控制,提高了焊接装备自动化水平,在微机应用于焊接领域的研究中作了进一步的探索。
The system is ideally suited for the coned of submerged are welding with constant wire feed speed, and has increased the level of automation of the arc welding...
系统可用于等速送丝埋弧自动焊的控制,提高了焊接装备自动化水平,在微机应用于焊接领域的研究中作了进一步的探索。
The system is ideally suited for the coned of submerged are welding with constant wire feed speed, and has increased the level of automation of the arc welding process. This design is a fur- the…
系统可用于等速送丝埋弧自动焊的控制,提高了焊接装备自动化水平,在微机应用于焊接领域的研究中作了进一步的探索。
The system is ideally suited for the coned of submerged are welding with constant wire feed speed, and has increased the level of automation of the arc welding process. This design is a fur- the…
应用推荐