分析了连铸连轧铝坯的组织和性能特点。
The structure and properties of continuous cast rolled aluminium stocks were analysed.
利用中厚板坯连铸连轧生产不锈钢是可行的。
The production of stainless steel flat products can be realized by adopting medium-sized slab continuous casting and continuous rolling technology.
介绍了连铸连轧法生产电解铜始极片的新工艺。
A description is made of new technology for producing starter sheets of copper electrolysis by continuous casting and rolling.
分析结果为薄板坯连铸连轧流程的优化提供了依据。
Results from the analysis provides basis for the system optimization of the thin slab casting and rolling process.
首先建立了两流薄板坯连铸连轧流程生产调度规则库。
Schedule rules for two-strand thin slab casting and rolling were established.
铸坯质量问题是薄板坯连铸连轧工艺研究的核心问题。
The slab quality was the key to the research of thin slab continuous casting and rolling process.
薄板坯连铸连轧工艺的生产流程有别于传统工艺流程。
The process of thin slab continuous casting and direct rolling is different from the traditional one.
讨论了两流薄板坯连铸连轧作业时铸坯在加热炉内的运动情况。
The movement of slabs in reheating furnace from two-strand thin slab continuous caster operations is discussed.
介绍连铸连轧法试制电解电容器用铝质负极箔的工艺研究过程。
We hereby give a brief introduction of the process using continuous casting& rolling method to produce aluminum cathode foil for electrolytic capacitor.
对哈兹列特工艺在铝板带连铸连轧应用中若干问题进行了探讨。
Various problems in the application of Hazelett process to continuous casting and rolling for aluminum plate and strip are discussed in the article.
文中着重讨论了薄板连铸连轧生产线建设中应研究的有关问题。
The several aspects to be considered in the construction of the thin slab continuous casting and rolling line are highlighted in this paper.
薄板坯连铸连轧工艺热过程数字化正是这个软件的重要组成部分。
Therefore the digital model on heat transformation process of CSP is vitally component of this software.
推荐使用美国哈兹·列特连铸连轧工艺生产铝箔坯料所需的热轧带。
Hazelett continuous casting followed by in-line hot rolling with tandem mills is recommended for producing good quality foil stock of aluminum.
介绍了本钢薄板坯连铸连轧工艺生产冷轧深冲钢(IF钢)的情况。
This paper describes the production condition of cold rolled deep drawing quality steel (IF steel) by thin slab continuous casting and rolling technique in Bengang.
组织超细化是导致薄板坯连铸连轧流程V微合金钢强度提高的主要原因。
The main reason for strength increase of V microalloyed steel is ultra-fine microstructure in TSCR process.
本文就薄板坏连铸连轧生产热轧TRIP钢的可行性进行了分析和讨论。
In the present article, the feasibility of the production of hot rolled TRIP steels using TSCR process was analyzed.
有色金属的连铸连轧、连续铸轧是典型的高效、节能、短流程加工技术。
The continuous casting rolling technology for nonferrous metals is a typical high efficiency, energy saving and short process method.
薄板连铸连轧工艺是钢铁工业的重大变革技术,要切实掌握和逐步推广。
The thin slab continuous casting and rolling process is a reforming technology in the steel industry, and it should be mastered and promoted step by step in China.
在薄板坯连铸连轧生产线中,加热炉的缓冲能力有时成为制约生产的关键。
Buffer time of tunnel furnace is the key process in thin slab continuous casting and rolling (TSCR) line.
介绍了具有代表性的研发趋势,如薄板坯连铸连轧、双辊薄带铸轧等新工艺。
Rather new manufacturing technologies such as thin slab casting rolling and twin roll casting technology were prospected.
利用薄板坯连铸连轧和薄带铸轧组合方案生产不锈钢可以更好地形成优势互补。
A suggestible solution is the combined production of thin slab continuous casting and continuous rolling together with strip casting, so that it will be complemental in superiority for both of them.
前言:薄板坯连铸连轧工艺有两个发展趋向:超薄带钢生产线和多品种生产线。
Thin slab casting and rolling technology has been developing toward two directions: ultra-thin strip production and multiple steel grades production.
薄板坯连铸连轧将近终形连铸与直接轧制相结合,缩短了传统连铸与轧钢工艺流程。
Thin slab concast & conroll combines the near net shape continuous casting and the direct rolling together, thus to shorten the conventional continuous casting & rolling process.
哈兹·列特铝板带连铸连轧工艺已被成功地用于铝和铝合金冲击挤压用坯料的生产。
Hazelett strip casting process is already successfully used for producing slug for impact extrusion.
采用该软件对个别典型的工艺进行分析,为连铸连轧生产线的设计提出了有益的建议。
Based on the simulation, some typical processes were investigated, and some useful Suggestions for the design of thin slab continuous casting and rolling line were proposed.
本钢薄板坯连铸连轧生产线在调试生产阶段,精轧机F3多次出现轧裂卡钢停产事故。
The Finishing mill F3 repeatedly occurs accidents of rolling crack and stopping steel plate in debugging production stage of thin slab concasting and conrolling production line in Bengang.
简要分析了连铸连轧圆管坯表面缺陷的类别和形成原因,提出了改进圆管坯质量的措施。
Types of and causes for the surface defects of the CC round billet for pipe - rolling with mandrel mill are analyzed, and quality improvement measures proposed.
本文主要从中薄板坯连铸连轧的特点出发,对中薄板坯连铸连轧的产品品种进行了分析。
The strip products on medium thin slab casting and direct rolling line were analyzed based on the characteristics of the medium thin slab casting and direct rolling line.
文章阐述了包钢薄板坯连铸连轧加热车间加热炉砌筑的材料特点、结构特点及施工方法;
The paper presents the characteristics of materials, the structure ones and the method in constructing the heating furnace of the heating workshop of the CSP Plant of Baotou Steel Corp.
文章阐述了包钢薄板坯连铸连轧加热车间加热炉砌筑的材料特点、结构特点及施工方法;
The paper presents the characteristics of materials, the structure ones and the method in constructing the heating furnace of the heating workshop of the CSP Plant of Baotou Steel Corp.
应用推荐