本发明提供一种适用于链（或网）带式连续热处理炉的炉门装置。
This invention provides a kind of furnace door equipment suitable for use in linked (or neeted) belt type continuously heat treatment furnace.
然后，采用合理的连续热处理规范，使车轮获得了良好的力学性能和金相组织。
Then, good mechanical property and microstructure is obtained by adopting reasonable continuous heat treatment specification.
1992年投产至今，设备运行良好，与国内同类型连续热处理炉相比，处于领先地位。
From 1992 up to now the equipment has been run well and achieved advanced level compared with the continuous heat treatment furnace with the same type in home.
气垫式金属板带材连续热处理炉内流速场，关系到板带材漂浮的稳定性以及加热温度的均匀性。
The velocity field in air cushion furnaces for continuous heat treatment of metal plate-strip is related to the floatation stability and heating temperature homogeneity of plate-strip.
它的生产过程是将不同元素的前驱粒子混在一起制成“纳米微粒墨”，将其连续不断地涂在金属薄片表面，然后通过加热处理使粒子适当地组合。
It mixes small precursor particles of the different materials to create a "nanoparticle ink" that is continuously coated onto metal foil and then heated so that the particles assemble correctly.
本文针对抽油杆的连续感应中频热处理过程，介绍了以PC总线工控计算机为核心的智能控制系统。
In this paper, PC-bus industrial computer being as a kernel, the intelligent control system is demonstrated for continuous induction heat treatment of extraction oil bar.
基于这些方程在ANSYS软件上实现了对厚壁筒形工件连续感应热处理的计算机模拟计算。
Based on these equations, continuous induction heat treatment of the thick wall tube, including heating, quenching and tempering, is simulated by finite element method on ANSYS software.
钢，不锈钢，铜及铜合金的棒，零件和管的热处理连续辊底式炉。
Continuous roller hearth furnaces for the heat treatment of steel, stainless steel, copper and copper alloy bars, sections and pipes.
铁丝连续镀锌的生产过程由拉丝、热处理、前处理、镀锌、后处理和废水处理所组成。
The production process of continuous zinc electroplating for steel wire was composed of wire drawing, heat treatment, pretreatment, zinc plating aid post-treatment as well as wastewater treatment.
从连续冷却转变图获得的相转变行为对热处理过程提供了有用的指导。
Phase transformation behavior obtained from CCT curves provides useful instructions for the heat treatment process.
模拟钢轨焊接及焊后热处理工况，采用热膨胀方法分别测定uic 900a及u75 V钢轨钢的连续冷转变曲线(CCT曲线)。
By simulating welding and simulating heat treatment after welding, CCT Curves of UIC900A and U75V rail steels are determined by the expansion method.
连续感应热处理过程存在着强电磁场干扰、非线性、强噪声和过程参数多变性，传统的控制方法难以奏效。
In process of continuous induction heat treatment, there are heavy electromagnetic disturbance, nonlinearity. heavy noise and variable parameters. The existed methods of control are difficult.
分析了基体钢(6422钢)滚刀实体分别经连续冷却和等温冷却热处理后的显微组织和形貌。
The microstructure and morphology of matrix steel (6422) cutter with continuous cooling and isothermal cooling heat treatment were studied.
本文论述了连续式推杆热处理炉的技术改造。
This paper introduces the technical improvement of continuous pusher type furnace.
新型化学热处理工艺已用于连续铸钢机的结晶器。
A new technology of chemical heat treatment has been applied in mould of continuous casting machine.
介绍大盘重粗拉、热处理、成品拉拔生产工艺技术以及各工序之间的运输方式，说明大盘重连续生产线的设计应从钢丝生产的总体流程考虑。
To introduce the production process technology of rough drawing, heat treatment and finish drawing of heavy coil steel wire and the transportation manner among procedures.
同时引进世界先进多功位成型机，大型热处理连续网带炉。
Meanwhile, we have introduced world-class advanced molding machine, large-sized heat treatment continuous mesh belt furnace.
本文介绍了一种连续式网带传送热处理炉的研制，对其主要技术指标、设计要点、控温方式以及提高整机性能做了详细的论述。
The fabrication of a continuous conveyor furnace and its main technical data, design points, temperature control method, improvements of performance are fully described in this paper.
通过对热处理后的连续玄武岩纤维进行结构分析，初步得出随热处理温度的升高有利于提高连续玄武岩纤维力学性能的结论。
This paper analyses the structure of CBF after heat treatment and the initial results show that an increase in temperature of heat treatment will beneficial to mechanical properties of CBF.
从连续冷却转变图获得的相转变行为对热处理过程提供了有用的指导。
Phase transformation behavior obtained from CCT curves provides useful instructions for the heat treatment process. Wear-resistance of multicomponent white irons used for hot rolling...
北赛电工接触线的生产工艺主要包括合金熔炼、连续铸造、连续挤压、轧制、在线探伤、拉拔成型以及热处理等。
The main production technology of BSEC includes alloy melting, continuous casting continuous extruding, rolling, online detection, drawing molding, heat treatment, etc.
本发明涉及连续铸钢用保护管，它以一般连铸用耐火材料基础复合陶瓷材料经过混料、成型、热处理等工序制作，所得产品具有耐冲刷、抗腐蚀及较好的热稳定性等特点。
The protecting pipe for continuously-casting steel is made up by using general refractory material as basis and adding ceramic material through the processes of mixing, forming and heat treatment.
实际生产作业说明，该钢丝热处理、酸洗、磷化连续作业线，可以实现金属制品大盘重周转加工和高速化、连续化生产，产品质量符合国家标准规定。
The practice shows the production line realizes the large size circulating processing and high speed and continuous production of wire products. The quality of product reaches the national standard.
实际生产作业说明，该钢丝热处理、酸洗、磷化连续作业线，可以实现金属制品大盘重周转加工和高速化、连续化生产，产品质量符合国家标准规定。
The practice shows the production line realizes the large size circulating processing and high speed and continuous production of wire products. The quality of product reaches the national standard.
应用推荐