黄铜合金连续挤压成形实验验证了数值模拟分析结果。
The numerical simulation analysis was verified by the continuous extrusion experiment.
该强化设备将应用于对连续挤压生产的铜扁线进行强化。
The equipment will be used to strengthen the copper flat wire produced by continuous extrusion machine.
分析了传统拉拔退火法和连续挤压法生产铜扁线的组织。
The microstructure for copper strip produced by traditional drawing anneals method and continuous extrusion method are analyzed.
对铜母线连续挤压过程的几何模型进行简化，基于MSC。
By simplifying the geometry model of the copper bus bar continuous extrusion process, based on a new metal forming simulation package, MSC.
提出了一种高效节能的铜管生产新技术连续挤压生产工艺。
This paper put forward, a new production technology of copper tube with that is high efficiency and saving energy, that is, the continuous extrusion technology.
目前，在连续挤压生产线收排线机的控制中常采用手动控制。
At present, manual control is often employed in the control of drawing and rolling machine in continuous extrusion production-line.
针对进行连续挤压成形系统有限元分析所需的理论基础做了说明。
Explain the basic theory that will be used in analyzing the continuous extrusion deformation system FEM method.
但是采用连续挤压方法只能得到软态的铜扁线，抗变形能力较差。
But the copper strips made by continuous extruding are soft and the anti - bending property is low.
铜连续挤压技术由于自身的许多优势在工业生产中得到了广泛的应用。
Copper continuous extrusion technique is extensively applied in industrial production because of its own many advantages.
分析了连续挤压工艺特点，系统总结了连续挤压产品的质量控制要点。
This paper analyzes technological characteristics of continuous extrusion and summarizes quality control of continuous extrusion products.
通过改进工装模具结构，在普通油压机上实现了丝材的无压余连续挤压。
The improved design of process tooling structure realized continuous extrusion in common oil press machine.
腔体是连续挤压机的主要零件之一，在工作过程中产生复杂的温度环境。
Chamber is one of the main parts of continuous extrusion machine, which produces complicated temperature environment in working process.
最后，根据锯齿型冰力模型得出自激振动与连续挤压破坏发生的转变速率。
Then transition velocity of self-excited vibration and continuous crushing is got bu the model of saw-tooth force function.
解决了采用连续挤压技术生产铜扁线中挤压轮、腔体和模具等技术关键问题。
Rectangular copper wire is produced by continuous extrusion machine, while the key technology about extrusion wheel, die chamber and die have been studied.
此文介绍了连续挤压内凸筋口琴管模具的设计方法及其模具芯头的冷挤压加工。
This paper is about die tongue making: the design method and cold-press formation.
因此尝试采用模糊神经网络控制技术来进一步提高铜连续挤压生产的自动控制水平。
So we attempt to improve furtherly auto-control level of copper continuous extrusion production by fuzzy neural network control technology.
因此尝试采用BP神经网络控制技术来进一步提高铜连续挤压生产的自动控制水平。
So we have attempted to apply the BP Neural Network Technology to improve further the automatic-control ability of the continuous extrusion process of copper.
根据生产经验，分析了D 97多孔扁管连续挤压时开裂的原因，并提出了改进措施。
According to production experience, the cracks reason of D97 multi-port tube during continuously extruding is analyzed. The improvement method is also presented.
现在，由这些设备和相应的辅助设施组成的铜连续挤压生产线已有了很高的自动化程度。
Now, copper continuous extrusion production line composed of these equipments and their relevant auxiliary facilities has had a very high automaticity.
现在，由这些设备和相应的辅助设施组成的铜连续挤压生产线已有了很高的自动化程度。
At present, the continuous extrusion production lines of copper, which is composed of the above equipment and other subsidiary facilities, has reached a high automatic extent.
根据铜线挤压生产的实际情况，开发了适应铜线连续挤压生产需要的挤压模具及工艺流程。
Based on the actual circumstance of extrusion production of copper lines, the extrusion die and technology flow adapted to the continuous extrusion of copper lines were developed.
作为连续挤压成形零件的模具、挤压轮及堵头所受的成形力分析是其进行结构设计的关键。
As the important parts of continuous extrusion forming, validation of forming load on tool and die is the key of their design.
得到了连续挤压成形过程中任意步骤时的三维应力场分布、应变场分布、速度场分布情况。
Have gotten the 3d stress, strain and velocity distribution of arbitrary step in continuous extrusion course.
冰的连续挤压引起柔性结构的剧烈振动表明冰荷载的动力性质和对该问题采取对策的必要性。
The intensive vibration of flexible structures induced by continuous crushing of ice indicates the dynamic nature of ice loads and the necessity of taking countermeasures to solve this problem.
记录了冷挤压过程中与不同变形程度相对应的挤压力，绘制了冷挤压过程的连续挤压力曲线；
And the extrusion force to different transfiguration degree was recorded to draw the continuous extrusion force curve during the cold-extrusion course.
在采用连续挤压包覆技术生产铜包钢接触线时，钢丝的预热温度对产品的质量有重要的影响。
The temperature of steel wire affects the quality of the copper clad steel contact wire when it is produced with new craft of continuous extrusion.
操作时，可按穴点做点状挤压，也可在身上循经络连续挤压出多个瘀斑瘀点、并使之排列成行。
Squeeze-pressing can be done on the points to get spotted ecchymosis, it can also be done along the channel with the ecchynosis arranged in lines.
而连续挤压成型能实现石膏基墙板生产自动化，减少用水量，减少废料，提高生产效率，保证品质。
But continuum extrusion molding can reduce the mete of using water, reduce flotsam, carry out automatism, improve production and ensure the quality.
它可拥有一个连续挤压的模式，因为有柱锭焊接技术，还有牵引系统和其它自动化的挤压配套设备。
The continuous extrusion model with welding dies functions well with puller systems and other automated handling equipment.
它可拥有一个连续挤压的模式，因为有柱锭焊接技术，还有牵引系统和其它自动化的挤压配套设备。
The continuous extrusion model with welding dies functions well with puller systems and other automated handling equipment.
应用推荐