包括油缸、连接销、连接座、轴承座、传动座总成和上压轴；
The connecting seat, the bearing seat and the transmission seat assembly are mounted on the upper pressing shaft;
还有一个重要的部分是铲斗油缸连接销、衬套，一定要对这些地方的松紧进行检查。
Also some important part is the bucket cylinder joint pin, the bushing, certainly must carry on the inspection to these place loose and tight.
型井架主体结构为前开口形轻便井架，整体分为四段，有锥销连接，具有拆除方便、整体稳定性强的特点。
The major structure of K-type Mast is open-face mast, and the body is divided into four sections, which are connected by tapers and convenient to be dismantled with good stability.
它与转盘通过四个钢销连接在一起，而钢销与转盘上的匹配孔眼相配合。
It is connected to the rotary table by four large steel pins that fit into mating holes in the rotary table.
在活塞中活塞销孔也同样为活塞销形支承面，其作用为连接连杆。
The piston pinhole in the piston also serves as a bearing for the piston pin, which is used to connect the connecting rod.
连杆小头连接着活塞销。
The connecting rod little end is connected to the piston pin.
当活塞在真空作用下运动时，由于活塞销和连杆的质量是依次连接的，活塞速度呈阶梯式变化。
When the piston is moved by vacuum, its velocity changes in steps, for the mass of piston pin and rod are connected in turn.
通过把连杆连接到包住曲柄销的一个主盘上，十二个气缸便可在同一个曲柄销上工作。
By attaching the connecting rods to a master disk surrounding the crankpin, as many as twelve cylinders have been made to work on a single crankpin.
导叶操作机构主要包括：导叶臂压板、导叶臂、分瓣键、连接板、耳柄、剪断销、连杆销及压盖等。
Guide vane operation structure includes the guide vane arm clip board, guide vane arm, segmental keys, connection board, handle, cut pin, connecting rod pin and gland, etc.
为了确保臂杆和阀瓣螺母之间的安全连接，使用了开口销。
To ensure a secure connection between the arm and the disc nut, split pin is used.
转向横拉杆长度的设置要保证转向横拉杆与转向节臂的连接点位于主销到后桥前端汽车中心线上的点所形成的假想连线上。
The track rod length is set so that its connection to the track arm falls on an imaginary line taken from the king pin to a point on the vehicle center line just in front of the rear axle.
转向横拉杆长度的设置要保证转向横拉杆与梯形臂的连接点位于主销到后桥前端汽车中心线上的点所形成的假想连线上。
The track rod length is set so that its connection to the track arm falls on an imaginary line taken from the king pin to a point on the vehicle center line just in front of the rear axle.
连杆与活塞的连接是采用活塞销。
The connecting rod is attached to the piston by the piston pin.
将三根附墙杆起吊到适当高度，首先用销轴将杆与标准节一端连接，然后安装到地脚螺栓连接板上。
Lift the 3 shaft adhered to wall to the suitable height, firstly, connect the shaft with one end of the standard section, then install on the connection plate of foundation bolt.
顶销，用于连接起落架扭力臂两部份的销子。
APEX pin, a pin for joining the two sections of the torsion link on the landing gear.
上叶片与下叶片通过销轴和滑槽连接。
The upper blade is connected with the lower blade through a pin shaft and a chute.
对旋挖钻机桩架整体有限元分析中的关键件——销轴连接的有限元模型进行了深入研究，并提出了实用而精确的有限元模型。
The key in finite element analysis on complete pile frame of rotary pile drill-finite element model of pin connection, is researched in depth. A feasible and accurate finite element model is offered.
锁闭拉杆或拉绳与锁闭销连接。
The locking tie rod or pulling rope is connected with locking pin.
所述弯棒呈直角弯曲形状，所述弯棒一端与主杆固定连接，所述弯棒另一端垂直焊接有一弯棒取销板；
The bent stick is in a right-angle bent shape, one end of the bent stick is fixedly connected with the main rod, and the other end is vertically welded with a pin taking board of the bent stick.
纵向调节机构的纵向导板与定位板之间的连接方式可采用压紧连接或柱销式连接。
The connection type between the vertical guide plate of the vertical adjusting mechanism and the positioning plate can adopt compression-fitting connection or dowel pin type connection.
用于固定关节假体的销包括用于与假体(2)相关的连接部分(4)和位于在骨骼上形成的孔中的接合部分(5)。
A pin for the anchoring of articular prostheses includes a connecting portion (4) with a prosthesis (2) and an engagement portion (5) in a hole obtained within a bone.
第四章介绍了取样器安全性准则，主要包括保真取样器稳定性理论及取样器释放参数的定性分析及新型销轴式连接方式。
Chapter 4 mainly illuminates safety sampling technique, including theory of corer tube stability, qualitative analysis of parameters of corer releasing and a new type connection of plug pin.
铆钉销可以借助于铆钉安插工具与盲铆钉的为此指定的部分连接。
Said rivet pin can be connected, by means of a rivet positioning tool, to a part of the blind rivet designed for said tool.
通过分析两种新型的连接件内形成的砼抗剪销对抵抗组合梁的纵向剪力的作用，寻求最适宜用于实际工程的连接件；
PBL connector and embedded connector) and traditional bolt connectors are contrasted, and shear connector of composite steel-concrete connector is especially analyzed by FEA method.
销的连接器上都轻轻压接边登上临时举行。
Dowels on both sides of connector lightly press-fit to board for temporary holding.
它主要由活锁扣片（2）和死锁扣片（6）通过销轴（5）连接构成，在活锁扣片上有一锁舌插孔。
The utility model is mainly formed by the connection of a movable lock catch (2) and a fixed lock catch (6) via a pin roll (5). The movable lock catch is provided with a lock tongue plug jack.
对旋挖钻机桩架整体有限元分析中的关键件——销轴连接的有限元模型进行了深入研究，并提出了实用而精确的有限元模型。
The key in finite element analysis on complete pile frame of rotary pile drill-finite element model of pin connection, is researched in depth.
对旋挖钻机桩架整体有限元分析中的关键件——销轴连接的有限元模型进行了深入研究，并提出了实用而精确的有限元模型。
The key in finite element analysis on complete pile frame of rotary pile drill-finite element model of pin connection, is researched in depth.
应用推荐