最后就燃烧系统进行模糊控制理论探讨。
对电动汽车用永磁同步电动机进行模糊控制，根据电动机参数对电动汽车进行仿真。
The fuzzy control has been done by the PMSM in the electrical vehicle, the simulation has been put up by the electrical vehicle according to the parameter of the motor.
本文论述了碳纤维生产过程中对温度进行模糊控制的思想，并详细地描述了模糊控制器的设计过程。
The fuzzy control of temperature in process of carbon fibre producing is discussed in this thesis. Further more, the process of design of fuzzy controller is described in detail.
论述了如何对原煤分选系统中的高压气阀进行模糊控制，其中包括输入量模糊化、模糊控制规则的建立及输出量的清晰化。
The author describes the fuzzy control towards high pressure air valve in raw coal separation system, including fuzziness of input, setting up of fuzzy control rules and certainty of outputs.
论述了如何对原煤分选系统中的高压气阀进行模糊控制，其中包括输入量模糊化、模糊控制规则的建立及输出量的清晰化。
The author describes the fuzzy control towards high-pressure air valve in raw coal separation system, including fuzziness of input, setting-up of fuzzy control rules and certainty of outputs.
从工程实践出发提出一种对多输入多输出温度系统进行模糊控制的方法，简化了多输入多输出之间的模糊关系，并得以成功应用。
A new fuzzy control method for electric stove temperature system is Wahar overviewed in this paper. It simplifies the MIMO relations and is successfully applied in practice.
针对污水处理系统DO参数控制的复杂性和难以建立准确数学模型的特点，提出了一种用PLC对系统进行模糊控制的方法及实现。
For the complexity and difficulty of establishing an accurate mathematical model of DO parameter control in sewage treatment system, we propose a fuzzy control method with PLC to deal with it.
之后引入加权因子，采用加权的方法将PID和模糊控制各自的输出进行融合，将融合的结果最后输出到被控对象上。
After that, introducing weight gene, syncretized PID and fuzzy control's outputs by adding weight. At last, the result of fusion was output to object controlled.
本文采用模糊神经网络算法对AT M网络进行连接接纳控制，仿真结果表明它比传统的算法有更好的效果。
This paper brings the fuzzy neural network algorithms into the call admission control in ATM networks. The simulation result shows that it has better effect than usual algorithms.
运用模糊理论进行评价，为进一步对其风险的管理和控制提供依据。
It utilizes the fuzzy theory to appraise and provides the basis for further research on risk management and control.
并进行了仿真研究，结果表明，基于稳定性而设计的模糊控制系统不仅具有良好的动态及稳态的性能，而且具有很强的抗扰能力。
The simulation results show that fuzzy control systems which are designed based on the stability have not only good dynamic and steady state feature but also strong rejection ability to disturbances.
所设计的自组织模糊控制器，其模糊控制规则用解析形式进行描述，并通过修正因子的在线调整而改变，适应了系统动态响应的过程。
As for the fuzzy controller, the rule is depicted with analytic form and changed through self-regulating correction factor on line, so that it ADAPTS the system dynamic process.
在高位机上实现了模糊除霜控制的仿真，并与实验数据进行了对比，表明自调整模糊除霜控制方法先进、可行。
Simulates it on a high order computer, and compares the simulating result with the experiment data showing that the self tuning fuzzy defrosting is advanced and feasible.
采用模糊神经网络结合常规PD控制器的方法来进行机器人的运动控制，提出了提取模糊规则的方法。
Fuzzy Neural Network combined with conventional PD controller is used for the kinematics control and a fuzzy rule extraction method is put forward.
提出的改进后的模糊控制算法可以对实际系统进行有效的控制，具有一定的应用价值。
The ameliorated fuzzy control algorithm can make efficiency control for the factual system, and it has certain application value.
斜坡根据密度跟踪误差和误差变化情况，通过模糊逻辑对控制器参数进行调整，确定了测量速度。
The ramp metering rate is determined by the PID controller whose parameters are tuned by fuzzy logic according to the density tracking error and error variation.
文章应用模糊控制技术，设计一种二输入三输出自适应模糊pid控制器，对锅炉水位进行控制。
Fuzzy control technology was applied to design a two-input and three-output self - (adapting) fuzzy PID controller to control the water level of boilers.
文中所提的PID模糊融合控制即是在本控制器上进行的实验研究。
The PID fuzzy fusion control in this thesis did experimental research on the controller.
采用模糊pid控制方法对锅炉燃烧系统进行控制，对具有大滞后特性的锅炉更具有显著控制效果。
It is better for the control effect of the boiler with severe lag characters that the burning system of the boiler is under the fuzzy PID control.
本文首先分析基本模糊控制系统存在稳态误差的根本原因，然后有针对性地引入两种插值方法对基本模糊控制器进行改进。
First, this paper analyses the essential cause why a basic fuzzy control system has steady-state error, then incorporates interpolation technique to improve basic fuzzy controller.
将模糊控制与常规pid控制相结合，根据不同的误差、误差变化率对PID的参数进行在线自动调整，这就是PID参数自整定模糊控制器。
Combine blur control with general PID control, on line self-adjusting PID parameters according to different error and error variety-rate, which is called PID parameters self-tuning blur controller.
针对电子膨胀阀步进电机驱动方式和本文的仿真结果，应用增量式PID和模糊控制方法进行实验分析。
PID and Fuzzy controllers are using in the experimentation based on the simulation results of the PID, fuzzy and fuzzy self-tuning PID controllers and the driven method for EEV.
医疗诊断系统是一个复杂系统，用一般的模糊控制方法进行设计效果并不令人满意。
The medicine diagnostic system is a complex system. It is not satisfactory to design by using general fuzzy control method.
医疗诊断系统是一个复杂系统，用一般的模糊控制方法进行设计效果并不令人满意。
The medicine diagnostic system is a complex system. It is not satisfactory to design by using general fuzzy control method.
应用推荐