对于变形组和分离组器械进行扫描电子显微镜观察，分析器械分离类型。
A scanning electron microscope was used to examine some typical changes of the fractured instruments to analyze the separation types.
利用扫描电子显微镜（SEM ）、显微喇曼光谱、X射线衍射等手段对合成的金刚石薄膜的成分与结构进行了分析。
The constituents and the structures of the diamond films have been identified by means of scanning electron microscopy (SEM), Raman spectroscopy and X-ray diffraction.
方法：采用扫描电子显微镜和光学显微镜进行观察。
Methods: Using microscope and scanning electron microscope, characteristics of the Pinellia pedatisecta Schott. were studied comparatively.
所得产物用X射线衍射仪(XRD)和扫描电子显微镜(SEM)进行了表征。
The products were well-characterized by X-ray diffractometer (XRD) and scanning electron microscope (SEM).
采用扫描电子显微镜(SEM)观察表面腐蚀形貌，XRD进行腐蚀产物分析。
Surface morphologies were observed by scanning electron microscopy (SEM), and X-ray diffraction (XRD) was used to analyze the crystal corrosion products.
应用扫描电子显微镜(SEM)分别对不同复合材料进行了界面形态和微观结构的研究。
By scanning electronic microscope (SEM) it was tested for the interfacial state and morphological structure of different composites.
用扫描电子显微镜(SEM)对粉料及微波合成的块体样品表面进行物相分析和元素的半定量分析。
Scaning electronics microscopy (SEM) was applied hereby to surface phase and elements analysis of the powder by precursor method and grain sample by microwave method.
对DX -3型扫描电子显微镜进行了总体维修和复杂电路图的简化。
The type DX 3 electronic scanning microscope has been wholly maintained, and its complexed circuit diagrams have been simplified.
用扫描电子显微镜，对粒子的形态进行了观测。
The morphology of latex is observed by using scanning electron microscope.
用扫描电子显微镜（SEM）、紫外可见光谱和电化学技术对组装过程进行了表征。
SEM, UV-vis spectroscopy and electrochemical techniques were used for characterization of assembly process.
用扫描电子显微镜(sem)和X射线光电子能谱仪(XPS)对钢球磨损表面进行了分析。
The worn surfaces of the steel balls were analyzed by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS).
用扫描电子显微镜(SEM)对包膜肥料的表面、界面及养分溶解释放后的表面进行了微观形态结构研究。
Morphological microstructure, such as surface, interface and surface of coated fertilizer after nutrient being released in water, was studied by scanning electron microscopy (SEM).
利用X射线衍射仪和场致发射扫描电子显微镜等手段对合成粉体的相组成、结构和形貌进行了研究。
The phase composition and microstructure of mullite powders were investigated by X-ray diffraction and field emission scanning election microscopy techniques.
方法：通过扫描电子显微镜(sem)和x衍射(XRD)方法，对青黛的微观结构进行了研究。
METHODS: Study on the microstructure of Indigo Naturals with scanning electron microscope (SEM) and X ray diffractometer (XRD) were carried out.
通过X射线粉末衍射（XRD）和扫描电子显微镜（SEM）对产物进行了表征。
The prepared product has been characterized by means of X-ray diffraction (XRD) and scanning electron micrography (SEM).
本文介绍模拟式电子显微镜扫描系统的基本组成，对系统整体和各单元电路的工作原理进行了分析。
The general composition of the sweep systems in analogue electron microscopes was introduced, then the operation principle for the whole system and all the related circuits was discussed.
利用光学显微镜和扫描电子显微镜，对我国石榴科的花粉形态进行了研究。
The pollen morphology of Punicaceae from China is examined under light and scanning electron microscopes.
用扫描电子显微镜(SEM)观测试样的断裂表面，对产生于若干特殊损伤类型的AE信号进行了鉴别。
The fracture surfaces of the specimens were observed by a scanning electron microscope (SEM). The AE signals were distinguished as being released from (several) special types of damage.
应用扫描电子显微镜(SEM)，分别对不同复合材料进行了界面形态的观察，证明与试验结果一致。
With the help of scanning electronic microscope (SEM), the same conclusion is proved by the interfacial state and morphological structure of the composites.
试验采用比表面积分析仪、环境扫描电子显微镜、快速水分测定仪分别对纤维涂层形貌以及渗水特性进行表征。
The appearance and Water-releasing Characteristics were described by BET surface area measurement, the environment scanning electron microscope and fast water equipment.
用原子力显微镜（AFM），扫描电子显微镜（SEM），X 射线粉末衍射仪（XRD），BET 比表面积分析仪对其结构进行了表征。
The structures of RDX/RF aerogel were characterized by atomic force microscopy(AFM), scanning electron microscopy(SEM), X-ray powder diffraction(XRD), and BET method.
采用直读光谱仪、显微硬度机、光学显微镜和扫描电子显微镜等分析手段，对失效的汽车发动机活塞连杆总成断裂原因进行了分析。
Aemission spectrometer, micro-hardometer, optical microscope and scanning electron microscope were used to analyze the reason of crack on connecting rod unit assembly for piston of car engine.
利用扫描电子显微镜对微细化淀粉的颗粒形貌进行了分析比较。
The micronized starch granular was analyzed and compared through Scan Electron Microscope.
本文对普通光学显微镜难以区分和鉴别的白蚊伊蚊和埃及伊蚊卵，以扫描电子显微镜进行了形态观察。
The scanning electron microscope had been used for surface observation of the eggs from Aedes albopictus and Aedes aegypti which are difficultly distinguished from each other by optical microscope.
用光学金相显微镜和扫描电子显微镜对SWRH72A盘条拉拔断裂试样进行一系列检验分析。
A series of examinations and analysis have been made on the ruptured samples of the SWRH72A wire rod by way of optical metalloscope and scanning electron microscope (SEM).
用光学金相显微镜和扫描电子显微镜对SWRH72A盘条拉拔断裂试样进行一系列检验分析。
A series of examinations and analysis have been made on the ruptured samples of the SWRH72A wire rod by way of optical metalloscope and scanning electron microscope (SEM).
应用推荐