研究了扩展拉格朗日方法的人工神经网络模型，实现了其电路结构，并进行了仿真实验。
We have investigated artificial neural network models based on an augmented Lagrange method, and accomplished the circuit structure and the simulation experiments.
应用MATLAB针对一伴有随机噪声的信号进行了仿真实验，证明了该理论的可行性与优越性。
Simulation is carried out to a signal with random noise through the application of MATLAB, which verifies the practicability and the superiority of the theory.
对SINS和组合导航系统进行了仿真实验，实验结果表明所建系统的长时间导航性能有一定改善。
The SINS and integrated navigation system simulation experiment were conducted, the experimental results show that the built system long time navigation Performance is improved.
为了验证该方法的有效性，以核电厂设备蒸汽发生器u形管破裂等故障为例，进行了仿真实验研究。
In order to test the validity of the method, the inverted U-tubes break accident of Steam Generator and etc are used as examples, and many simulation experiments are performed.
其次，详细阐述了分簇算法的原理以及改进后的交叠分簇算法的原理，并对两种算法进行了仿真实验。
Secondly, elaborates on the principle of clustering algorithms, as well as the principle and simulation of overlapping clustering algorithm which is improved.
本文还探讨了智能控制理论在位置伺服系统中的应用，设计了模糊pid位置控制器，并进行了仿真实验。
Furthermore, this paper also explores the application of the intelligent control theory to the servo system. A fuzzy PID controller is designed for the position control.
本文介绍了自适应滤波器及其最小均方(LMS)算法，通过计算机进行了仿真实验并对仿真结果进行了讨论。
The adaptive filter and its least mean square (LMS) algorithm are reviewed. Computer simulation tests were made and results obtained therefrom are discussed.
以多进制相位调制方式采用这种波形结构进行了仿真实验和湖水试验，都获得了比传统的波形结构更低的误码率。
Emulate experiments and lake experiment obtained lower error code rate than traditional waveform design method using this waveform structure with multiple phase shift key modulation.
基于系统数学模型进行了仿真实验，得到最佳控制参数，仿真结果与加载台实验效果接近，验证了此方法的有效性。
Simulation were carried out based on the mathematic model with optimal parameters. Simulation results are equivalent to real system's, which validates the validity of the method.
再次，在对轮胎花纹噪声研究的基础上，探讨了道路噪声的发声机理、发声模型及其仿真模型，并进行了仿真实验分析。
Thirdly, the paper has discussed the generation mechanism, acoustic model and the simulation model of the road noise on the basis of the tire pattern noise, and carried out the simulation analysis.
并对这些算法进行了仿真实验，对输出的结果进行了认真的分析和比较，还实验对比了各算法在噪声情况下表现出来的效果。
Also studies the Canny operator and its defect, these methods are analyzed carefully trough experiment simulation, and also analyze every operator's effect in the noise.
最后，对上面提到的单移动机器人和多移动机器人的各种控制模型进行了仿真实验，并对仿真结果进行了分析，提出了相应的问题。
Finally, simulations are presented about the above coordinated control models of single mobile robot and multiple mobile robots. The results are analyzed and corresponding problems are introduced.
根据系统这一特点，采用三闭环模糊滑模控制策略，外环为速度和位置闭环，内环为电流闭环的方法设计控制器，并进行了仿真实验研究。
According to all of these characteristics of the system, a three-loop fuzzy sliding control mode is adopted, the speed and position loop are outer loop, and the current loop is inner loop.
以F10 0模糊芯片为例，设计了基于模糊芯片的控制系统，并在非线性的加工过程进行了仿真实验，同时运用于铣削过程的现场实验。
Taking the fuzzy chip F100 as an example, a control system based on fuzzy-chip is designed and applied to the simulation of nonlinear machining process and the experiment of milling process.
在研究单基阵被动声定位技术的基础上，提出了基于双基阵的被动声定位基本原理和方法，并对高炮弹丸炸点的被动声定位进行了仿真实验。
The results of simulation show that the accuracy of passive acoustic locating system based on dual arrays for shell burst of antiaircraft gun is improved, and can also be .
我们着重分析了其系统中存在的固有的非线性，给出了光程差的计算公式，找出了使系统非线性最好的参数匹配，并进行了仿真实验，得到了理想的结果。
The inherent nonlinerity in the system are analyzed , and the equation of optical path difference(OPD) is given . We obtained the best parameters to decrease the system nonlinerity .
在文章中，我们在现有的MOS器件模型的基础上再组建一个寄生的衬底模型，然后利用此模型逐一对单个MOS器件，具有累积效应的数字电路和部分基本模拟电路进行了仿真实验和分析。
In the article, we make a parasitic substrate model on the existing MOS model, and use this model to do simulation for each single MOS, accumulated effect circuit and some useful analog circuit.
针对各类对象，分别讨论了基于稳定域最优PID控制器的设计及进一步改进，并进行了大量仿真实验。
The design methods and further improvement of optimal PID controller for these plants are investigated respectively and a lot of simulation experiments are performed.
在KDDCUP99数据集中进行了对比仿真实验，实验结果表明算法对已知攻击和未知攻击的检测率以及算法的误警率都是理想的。
The simulations on the KDD CUP99 dataset show that the detection rate of known attacks and unknown attacks and the false positive rate of this algorithm are excellent.
对几种特殊的输入函数进行了编码仿真实验，结果说明了视皮层复杂细胞时空整合编码序列的精细时间结构能够进行视觉输入的神经表象。
The simulated results for three special input functions show the finer structure of spatiotemporal integration coding series of complex cells in visual cortex could represent visual inputs.
以大量的仿真实验及理论分析为基础，对寻优时目标函数的选取及寻优策略进行了详细的研究。
Based on lot of simulation experiments and theory analyses, research on selecting the optimization object function and the optimization strategy has been made in detail.
通过相似原理，从热力学系统角度出发，建立了间歇供暖加热过程的数学模型，并进行了系统的混合仿真实验。
The mathematical model of the process of intermittent heating was established on the basis of similitude principle and a hybrid simulation experiment was conducted systemically.
为了验证算法的合理性和有效性，在第4章中对此算法进行了大量的仿真实验来评价算法多方面的性能。
In order to verify the rationality and validity of the algorithm, in chapter 4 a large amount of simulation experiments have been made to appraise the performance of algorithms.
本文提出了一种新型的神经网络结构的位置控制器，给出了该控制器的学习算法，并进行了数控机床位置伺服系统的仿真实验。
This paper proposes a new type position controller with neural network structure, gives it 's learning rule, and do the simulation experiment on position servo system of NC machine.
在解析结构理论研究的基础上对所设计的模糊控制器进行了定性和定量的分析，分析结果和仿真实验证明了该方法的优越性和有效性。
It analyses the controller qualitatively and quantitatively on the base of analytical structures theory research, the analysis and simulation results show its advantage and effectiveness.
讨论了模糊pid控制器的设计方法，同时利用MATLAB软件中的模糊控制工具箱进行了系统的辅助设计与仿真实验。
A designing method of fuzzy PID controller is given, then an example of how to design and simulate the system by using the software MATLAB is introduced.
对正弦信号相位差估计的取样积分和互相关两种方法的理论进行了分析，并进行了数字仿真实验。
The theories of the sample integral and the cross - mutuality for the sinusoidal signal phase difference estimation are analyzed, and the digital simulation experiment is carried out.
据此仿真模型，进行了并励直流电动机的直接起动、降压起动、电枢回路串电阻起动的实例仿真实验，给出了有关仿真结果。
Then the model is applied to simulate the direct start-up process, the reduced voltage starting process and the starting process with series resistance in the armature circuit.
在只获得加速度的情况下，针对空间柔性智能桁架结构，进行了主动控制方法的实时仿真实验。
The paper discussed the simulation experiment of active vibration control method of flexible space intelligent truss structures with acceleration measurements.
在只获得加速度的情况下，针对空间柔性智能桁架结构，进行了主动控制方法的实时仿真实验。
The paper discussed the simulation experiment of active vibration control method of flexible space intelligent truss structures with acceleration measurements.
应用推荐